Embedded Wireless BLE SEN1000 G-Sensor Module SEN1000 G-Sensor Module Bluepacket Communications Co., Ltd. 5F-2,No.12,Ln270,Sec.3, Beishen Rd., Shen-Keng Dist.,New Taipei City 22205, Taiwan Tel: +886-2-26649168 • Fax: +886-2-26649166 www.bluepacket.net Embedded Wireless BLE SEN1000 G-Sensor Module Tri-axial digital Accelerometer Bluepacket’s SEN1000 Embedded Wireless BLE G-Sensor module is the perfect solution for embedded G-Sensors applications into the Bluetooth 4.0 Low Energy. The module contains a tri-axial digital accelerometer embedded with 11-Bit ADC. A thermometer is also embedded in the SEN1000. Its temperature sensitivity is 16 LSB/℃ and the central value (0h) stands for 25℃. The acceleration sensitivity is 256 LSB/g and the central value (0h) stands for 0g. Temperature and acceleration output values can be read from the data registers. The sensor output is converted to an 11-bit value and stored across two register bytes. Data representation is 2’s complement. In addition the data can be pre-processed by digital moving average filter for bandwidth control. Note: If you use the SEN1000 BLE feature to send/receive data with an iPhone 4S or above, no Apple MFI license is required. Wireless Sensor Series: SENxxxx: 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 G-Sensor ADC DAC Humidity & Temperature CO2 Ultrasonic Fluid Pressure Torque IR Applications: Display orientation switching Click sensing Menu scrolling HDD protection Mobile phone Gaming Remote Controller Car detection Smart toys For more information, contact: [email protected] SEN1000 G-sensor Module RS1001MB-BT EVK FEATURES: ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Bluetooth 4.0 single mode Compliant Supports Host (master) and Client (slave) modes AT command remote-access through UART configuration Passthrough Data Mode available Integrated Bluetooth low energy stack including ATT, GATT, SMP, L2CAP, GAP RSSI monitoring for proximity applications Android & iOS Compatible Tri-axial digital accelerometer with +/- 3g dynamic range Integrated Temperature Sensor for internal compensation and capable of digital output 11-bit ADC embedded with SPI and I2C digital interface Low operation voltage of +2.4V ~ +3.6V with minimum interface voltage of +1.7V Two interrupt pins configurable from three interrupt sources: freefall, click and high-G Freefall detection with user settable threshold 6-direction click detection with user settable threshold 3-direction motion detection (high-G) with configurable logic combination and threshold setting User selectable bandwidth and pin-controllable standby mode 5000g shock tolerance TX Power: 4.0 dBm Max RX Sensitivity: -92.5dBm Min Range: Up to 20 meters (line of sight) 32kHz and 16MHz crystal Programmable general purpose PIO controller 12 digital PIOs, 3 analogue AIOs, 3 PWM Wake-up interrupt, Watch Dog Timer On-board antenna, microprocessor, RAM and ROM FCC/CE/IC Certified, RoHS Compliant www.bluepacket.net