CUSTOMER : DATE : 2014.01.15 SPECIFICATIONS FOR APPROVAL PRODUCT : CSR1010 BLE (Bluetooth Low Energy) Module MODEL NAME : DDLCW-NMS1x CUSTOMER P/N : APPROVAL REMARK Revision 0.1 (14/01/15) - Initial release. Preliminary Designed Checked Approved DeviceDesign Co., Ltd. DOCUMENT No. DDLCW-NMS1x SA PAGE REV 0.1 (1 / 8) TITLE : Specifications for approval (DDLCW-NMS1x) (CUSTOMER P/N : REV 0.1 (2 / 8) ) 1. Absolute Maximum Rating Parameter Min. Max. Unit -40 105 deg.C VBAT 1.8 3.6 VDD_PADS -0.3 3.6 Storage Temperature Supply Voltage V 2. Test Electrical characteristics are tested for every products. However, if there are any objection in judgment, it should be treated with agreements of both companies. 3. Block Diagram BPF Pattern Ant. UART (BCM4339) PIO / AIO SPI 16MHz X-TAL I2C 32.768KHz X-TAL 0.1 R E V . 2014.02.07 CSR1010 Initial Release EEPROM DDLCW-NMS1x DeviceDesign Co., Ltd. DSGD CHKD APPD DDLCW-NMS1x DOCUMENT NO. DDLCW-NMS1x SA TITLE : Specifications for approval (DDLCW-NMS1x) (CUSTOMER P/N : REV 0.1 (3 / 8) ) 4. Mechanical Dimensions Dimension 23.0mm× 15.0mm ×2.55mm (Max.) 23 ± 0.25 3.975 15 ± 0.25 <Top Through View> 0.7 1.0 1.5 0.5 <Side View> 1.75 2.55 0.8 0.1 R E V . 2014.02.07 Initial Release DeviceDesign Co., Ltd. DSGD CHKD APPD DDLCW-NMS1x DOCUMENT NO. DDLCW-NMS1x SA TITLE : Specifications for approval (DDLCW-NMS1x) (CUSTOMER P/N : REV 0.1 (4 / 8) ) 5. Electrical Characteristics 1) Recommended Operating Rating Parameter Min. Typ. Max. Unit Operating Temperature -20 20 70 deg.C VBAT 1.8 - 3.6 VDD_PADS 1.2 - 3.6 Supply Voltage 0.1 R E V . 2014.02.07 V Initial Release DeviceDesign Co., Ltd. DSGD CHKD APPD DDLCW-NMS1x DOCUMENT NO. DDLCW-NMS1x SA TITLE : Specifications for approval (DDLCW-NMS1x) (CUSTOMER P/N : REV 0.1 (5 / 8) ) 6. Pin Assignment (Top View, Bottom Lay out) 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 <Top Through View> 21 20 19 18 17 16 15 14 1 0.1 R E V . 2014.02.07 2 3 4 5 6 7 8 Initial Release 9 10 11 12 13 DeviceDesign Co., Ltd. DSGD CHKD APPD DDLCW-NMS1x DOCUMENT NO. DDLCW-NMS1x SA TITLE : Specifications for approval (DDLCW-NMS1x) (CUSTOMER P/N : REV 0.1 (6 / 8) ) 7. Pin Description No. Pin Name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 GND GND GND GND GND GND GND GND AIO[2] AIO[1] AIO[0] PIO[0] PIO[1] PIO[3] PIO[4] PIO[5] PIO[6] PIO[7] PIO[8] PIO[9] PIO[10] PIO[11] SPI_PIO#_SEL GND GND GND VDD_PADS GND GND GND GND GND GND GND GND GND VBAT GND WAKE 0.1 R E V . Description Ground Ground Ground Ground Ground Ground Ground Ground Analogue programmable I/O line Analogue programmable I/O line Analogue programmable I/O line Programmable I/O line or UART TX Programmable I/O line or UART RX Programmable I/O line or SPI serial flash data (SF_DIN) input Programmable I/O line or SPI serial flash chip select (SF_CS#) Programmable I/O line or debug SPI_PIO#_SEL Programmable I/O line or debug SPI chip select (CS#) selected by SPI_PIO#_SEL Programmable I/O line or debug SPI MOSI selected by SPI_PIO#_SEL Programmable I/O line or debug SPI MISO selected by SPI_PIO#_SEL Programmable I/O line Programmable I/O line Programmable I/O line Selects SPI debug on PIO[8:5] Ground Ground Ground Positive supply for all digital I/O ports PIOs Ground Ground Ground Ground Ground Ground Ground Ground Ground Battery input and regulator enable (active high) Ground Input to wake module from hibernate or dormant 2014.02.07 Initial Release DeviceDesign Co., Ltd. DSGD CHKD APPD DDLCW-NMS1x DOCUMENT NO. DDLCW-NMS1x SA TITLE : Specifications for approval (DDLCW-NMS1x) 0.1 R E V . ) Referred to IPC/JEDEC standard. Peak Temperature : <250℃ Number of Times : 2 times 8. Reflow Profile (CUSTOMER P/N : REV 0.1 (7 / 8) 2014.02.07 Initial Release DeviceDesign Co., Ltd. DSGD CHKD APPD DDLCW-NMS1x DOCUMENT NO. DDLCW-NMS1x SA TITLE : Specifications for approval (DDLCW-NMS1x) (CUSTOMER P/N : REV 0.1 (8 / 8) ) 9. Application Circuit 0.1 R E V . 2014.02.07 Initial Release DeviceDesign Co., Ltd. DSGD CHKD APPD DDLCW-NMS1x DOCUMENT NO. DDLCW-NMS1x SA