PL IA N T Features This series is currently available, but not recommended for new designs. See Product Obsolescence Memo for details. M ■ 0.1 % tolerance from 100 ohms to *R oH S CO 360K ohms ■ RoHS compliant* ■ Three layer contacting process with nickel barrier helps prevent leaching and provides excellent solderability CRP Series - Precision Chip Resistors Electrical Characteristics Characteristic Power Rating @ 70 °C Model Model Model CRP0603 CRP0805 CRP1206 1/8 W 1/4W 1/10 W Operating Temperature Range -55 °C to +125 °C Derated to Zero Load at +125 °C Maximum Working Voltage 50 V 150 V 200 V Maximum Overload Voltage 100 V 300 V 400 V Resistance Range: (E-96 + E-24 Values) Temperature Coefficient ±50 PPM/°C ±100 PPM/°C 100 ohms to 360K ohms 100 ohms to 35.7K ohms 36K ohms to 100K ohms 100 ohms to 100K ohms 102K ohms to 360K ohms 100 ohms to 100K ohms 102K ohms to 360K ohms For Standard Values Used in Capacitors, Inductors, and Resistors, click here. Characteristic Data ΔR Max. Tests per IEC115-1 Derating Curve ±(0.5 % + 0.05 ohms) Load Life Humidity (1000 Hours) ±(0.5 % + 0.05 ohms) Short Time Overload ±(0.5 % + 0.05 ohms) Dimensional Drawing Rated power in percentage (%) Load Life (1000 Hours) Construction Overcoat L I1 Sn Plating 100 80 60 40 20 0 -55 0 Ni Plating Resistive Element Inner Electrode W Ceramic Substrate H I2 DIMENSIONS: MM (INCHES) Chip Dimensions Dimension Model CRP0603 Model CRP0805 Model CRP1206 L 1.60 ± 0.10 (0.063 ± .004) 2.00 ± 0.15 (0.079 ± .006) 3.10 ± 0.15 (0.122 ± .006) W 0.80 ± 0.10 (0.031 ± .004) 1.20 ± 0.15 (0.047 ± .006) 1.60 ± 0.15 (0.063 ± .006) H 0.45 ± 0.15 (0.018 ± .006) 0.50 ± 0.10 (0.020 ± .004) 0.50 ± 0.15 (0.020 ± .006) I1 0.35 ± 0.25 (0.014 ± .010) 0.40 ± 0.20 (0.016 ± .008) 0.50 ± 0.30 (0.020 ± .012) I2 0.40 ± 0.20 (0.016 ± .008) 0.40 ± 0.20 (0.016 ± .008) 0.50 ± 0.25 (0.020 ± .010) *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 70 (°C) Ambient temperature 125 Features (Continued) ■ Suitable for most types of soldering processes ■ Paper tape on reel for automatic placement CRP Series - Precision Chip Resistors Soldering Profile for RoHS Compliant Chip Resistors and Arrays 275 <1> Maximum of 20 seconds between 260 °C peak +255 °C and +260 °C <1> 255 °C 225 Temperature (°C) 220 °C 190 °C 60 - 90 seconds 175 Ramp Down 6 °C/second 150 °C 125 60 - 120 seconds 10 seconds minimum 75 Ramp Up 3 °C/second maximum 25 0 50 100 150 Time (seconds) 200 250 300 Packaging Dimensions (Conforms to EIA RS-481A) 4.0 ± 0.1 (.157 ± .004) 1.0 ± 0.2 (.040 ± .020) 2.0 ± 0.05 (.079 ± .002) B 3.5 ± 0.05 (.138 ± .002) A 2.0 (.080) 8.0 ± 0.2 (.315 ± .008) 4.0 ± 0.1 (.157 ± .004) 1.5 +0.1/-0 (.056 + .004/-0) 13.0 ± 0.5 (.512 ± .020) 80.0 ± 1.0 (3.150 ± .040) 1.75 ± 0.1 (.059 ± .004) Maximum 1 mm (.040) thick *Cumulative tolerance over 10 holes: ±0.2 mm 20.5 (.807) Dimension Model CRP0603 Model CRP0805 Model CRP1206 A 1.9 ± 0.2 (.075 ± .008) 2.4 ± 0.2 (.094 ± .008) 3.6 ± 0.2 (.142 ± .008) B 1.1 ± 0.2 (.043 ± .008) 1.65 ± 0.2 (.065 ± .008) 2.0 ± 0.2 (.079 ± .008) 178.0 ± 2.0 (7.008 ± .080) 11.4 ± 2.0 (.449 ± .079) Marking on reel: Part number, quantity, resistance value and tolerance, date code. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. CRP Series - Precision Chip Resistors Resistor Markings Marking Explanation E-24: • 3 digits; first two digits are significant, third digit is number of zeroes to follow. CRP0603 EIA-96 Marking E-96: • 0603 size, EIA-96 marked per table below. • 0805 and 1206 size, marked with 4 digits. First three digits are significant, fourth digit is number of zeroes to follow. 0.1 % marking Value = 12.4K ohms EIA-96 Marking for CRP0603, 0.1 % Code R Value Code R Value Code R Value Code R Value Code R Value Code R Value Code R Value Code R Value 01 100 13 133 25 178 37 237 49 316 61 422 73 562 85 750 02 102 14 137 26 182 38 243 50 324 62 432 74 576 86 768 03 105 15 140 27 187 39 249 51 332 63 442 75 590 87 787 04 107 16 143 28 191 40 255 52 340 64 453 76 604 88 806 05 110 17 147 29 196 41 261 53 348 65 464 77 619 89 825 06 113 18 150 30 200 42 267 54 357 66 475 78 634 90 845 07 115 19 154 31 205 43 274 55 365 67 487 79 649 91 866 08 118 20 158 32 210 44 280 56 374 68 499 80 665 92 887 09 121 21 162 33 215 45 287 57 383 69 511 81 681 93 909 10 124 22 165 34 221 46 294 58 392 70 523 82 698 94 931 11 127 23 169 35 226 47 301 59 402 71 536 83 715 95 953 12 130 24 174 36 232 48 309 60 412 72 549 84 732 96 976 This table shows the first two digits for the three-digit EIA-96 part marking scheme. The third character is a letter multiplier: Y=10-2 X=10-1 A=100 B=101 C=102 D=103 E=104 F=105 How to Order CRP 0603 - B Z - 7871 E LF Model (CRP = Precision Chip Resistor) Size 0603 = 0603 Size 0805 = 0805 Size 1206 = 1206 Size Resistance Tolerance B = ±0.1 % TCR (PPM/°C) Z = ±50 PPM/°C, 100 ohms through 35.7K ohms (0603 size); 100 ohms through 100K ohms (0805 and 1206 size) X = ±100 PPM/°C, 36K ohms through 360K ohms (0603 size); 102K ohms through 360K ohms (0805 and 1206 size) Resistance Value First three digits are significant, fourth digit represents number of zeroes to follow (example: 7871 = 7.87K ohms) Packaging E = 5,000 pieces on 180 mm (7 inch) reel Termination LF = Tin-plated (RoHS compliant) REV. 09/15 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.