SMA Male to SMA Male Low Loss Test Cable Using PE-P300LL Coax, RoHS TECHNICAL DATA SHEET PE333 The PE330 high performance test cable’s 0.3 inch diameter and 83% phase velocity offer very low loss performance up to 18 GHz. The durable stainless steel connectors and FEP jacket provide a cost effective design ideal for test environments where a rugged cable assembly is required. The series is offered with Type N, TNC, and SMA connectors all rated to 18 GHz. A heavy Duty boot provides improved strain relief and adds to the durability of the cable assemblies. These cable assemblies are built using a double shielded flexible cable, providing excellent shielding effectiveness of greater than 95 dB. All PE330 cable assemblies are 100% Continuity, Hi-POT, and RF tested to published specifications. Custom lengths are built to order and shipped same day. • • • • • • • • 83% Velocity of Propagation Shielding effectiveness > 95 dB Maximum VSWR is < 1.35:1 to 18 GHz Minimum Bend Radius of 1.5 inches Operating Temperature range of -55 to +125 °C ROHS and REACH Compliant Same day shipment of custom lengths 100% Continuity, Hi-Pot, and RF tested Configuration Connector 1 Connector 2 Cable Type SMA Male SMA Male PE-P300LL Electrical Specifications Frequency Range Impedance Maximum VSWR Velocity of Propagation RF Shielding DC to 18 GHz 50 Ohms 1.35:1 83 % 95 dB Typical Performance by Frequency Frequency 1 Frequency Insertion Loss Power Handling, KWatts 400 MHz 0 dB/ft [0.10 dB/m] 2.9 Frequency 2 Frequency Insertion Loss Power Handling 1000 MHz 0.05 dB/ft [0.16 dB/m] 1.8 KWatts Frequency 3 Frequency Insertion Loss Power Handling 2 GHz 0.07 dB/ft [0.23 dB/m] 1.2 KWatts Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male to SMA Male Low Loss Test Cable Using PE-P300LL Coax, RoHS PE333 PE333 REV 1.0 1 SMA Male to SMA Male Low Loss Test Cable Using PE-P300LL Coax, RoHS TECHNICAL DATA SHEET PE333 Frequency 4 Frequency Insertion Loss Power Handling 3 GHz 0.08 dB/ft [0.26 dB/m] 1.05 KWatts Frequency 5 Frequency Insertion Loss Power Handling 5 GHz 0.11 dB/ft [0.36 dB/m] 850 Watts Frequency 6 Frequency Insertion Loss Power Handling 10 GHz 0.16 dB/ft [0.52 dB/m] 600 Watts Frequency 7 Frequency Insertion Loss Power Handling 18 GHz 0.22 dB/ft [0.72 dB/m] 400 Watts Electrical Specification Notes: Power handling values are calculated based on Cable properties. Power handling will vary based on the actual VSWR of the cable assembly. Mechanical Specifications Temperature Temperature Operating Range -55 to +125 deg C Size Diameter 0.62 in [15.75 mm] Weight Cable Color Repeated Minimum Bend Radius 0.1 lbs [45.36 g] Green 1.5 in [38.1 mm] Cable Cable Type Cable Inner Conductor No of Shields Cable Outer Conductor Dielectric Type Jacket Material Jacket Diameter PE-P300LL Copper, Silver 2 Copper, Silver PTFE FEP 0.3 in [7.62 mm] Connector 1 Type Connector 1 Specification SMA Male MIL-STD-348, Figure 310-1. . Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male to SMA Male Low Loss Test Cable Using PE-P300LL Coax, RoHS PE333 PE333 REV 1.0 2 SMA Male to SMA Male Low Loss Test Cable Using PE-P300LL Coax, RoHS TECHNICAL DATA SHEET PE333 Configuration Inner Conductor Material and Plating Inner Conductor Plating Specification Outer Conductor Material and Plating Outer Conductor Plating Specification Coupling Nut Material and Plating Coupling Nut Plating Specification Hex Size Torque Body Material and Plating Body Plating Specification Dielectric Type Straight Beryllium Copper, Gold ASTM-B488 50µ In. Passivated Stainless Steel SAE-AMS-2700 Passivated Stainless Steel SAE-AMS-2700 5/16 Inch 8 in-lbs [0.9 Nm] Passivated Stainless Steel SAE-AMS-2700 PTFE Connector 2 Type Connector 2 Specification Configuration Inner Conductor Material and Plating Inner Conductor Plating Specification Outer Conductor Material and Plating Outer Conductor Plating Specification Coupling Nut Material and Plating Coupling Nut Plating Specification Hex Size Torque Body Material and Plating Body Plating Specification Dielectric Type SMA Male MIL-STD-348, Figure 310-1. Straight Beryllium Copper, Gold ASTM-B488 50µ In. Passivated Stainless Steel SAE-AMS-2700 Passivated Stainless Steel SAE-AMS-2700 5/16 Inch 8 in-lbs [0.9 Nm] Passivated Stainless Steel SAE-AMS-2700 PTFE Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male to SMA Male Low Loss Test Cable Using PE-P300LL Coax, RoHS PE333 PE333 REV 1.0 3 SMA Male to SMA Male Low Loss Test Cable Using PE-P300LL Coax, RoHS TECHNICAL DATA SHEET PE333 Plotted and Other Data Notes: • Values at +25 °C, sea level SMA Male to SMA Male Low Loss Test Cable Using PE-P300LL Coax, RoHS from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male to SMA Male Low Loss Test Cable Using PE-P300LL Coax, RoHS PE333 URL: http://www.pasternack.com/sma-male-sma-male-pe-p300ll-cable-assembly-pe333-p.aspx PE333 REV 1.0 4 PE333 CAD Drawing SMA Male to SMA Male Low Loss Test Cable Using PE-P300LL Coax, RoHS © 2014 Pasternack Enterprises All Rights Reserved PE333 REV 1.0 5