75 Ohm BNC Female Connector Clamp/Solder Attachment 4 Hole Flange For RG59, .500 inch Threaded Hole Spacing TECHNICAL DATA SHEET PE4623 75 Ohm BNC Female Connector Clamp/Solder Attachment 4 Hole Flange For RG59, .500 inch Threaded Hole Spacing Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style Mount Method BNC Female RG59 Clamp/Solder Straight 4 Hole Flange Electrical Specifications Impedance, Ohms 75 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 1.12 [28.45] 0.687 [17.45] 0.687 [17.45] Weight, lbs [g] 0.041 [18.6] Connector Type Contact Material and Plating Body Material and Plating Dielectric Type BNC Female Gold Brass, Nickel PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm BNC Female Connector Clamp/Solder Attachment 4 Hole Flange For RG59, .500 inch Threaded Hole Spacing PE4623 PE4623 REV 01 1 75 Ohm BNC Female Connector Clamp/Solder Attachment 4 Hole Flange For RG59, .500 inch Threaded Hole Spacing TECHNICAL DATA SHEET PE4623 Plotted and Other Data Notes: Values at 25 °C, sea level 75 Ohm BNC Female Connector Clamp/Solder Attachment 4 Hole Flange For RG59, .500 inch Threaded Hole Spacing from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm BNC Female Connector Clamp/Solder Attachment 4 Hole Flange For RG59, .500 inch Threaded Hole Spacing PE4623 URL: http://www.pasternack.com/bnc-female-standard-rg59-connector-pe4623-p.aspx PE4623 REV 01 2 © 2013 Pasternack Enterprises All Rights Reserved PE4623 REV 01 FSCM NO. 53919 PE4623 DWG TITLE 2. FORM BRAID OVER CLAMP NUT (4). TRIM BRAID BACK TO SHOULDER. CUT DIELECTRIC & CENTER CONDUCTOR TO DIMENSION SHOWN. DO NOT NICK CENTER CONDUCTOR. SLIDE SPACER (5) OVER DIELECTRIC. INSERT PTFE (6) OVER DIELECTRIC WITH CENTER CONDUCTOR PROTRUDING THROUGH HOLE. SOLDER CONTACT TO CENTER CONDUCTOR. REMOVE EXCESS SOLDER. DO NOT OVER HEAT DIELECTRIC. INSERT CABLE ASSEMBLY INTO BODY & TIGHTEN. BRAID & SEAT AGAINST CABLE. 1. SLIDE CLAMP NUT (1), WASHER (2) & GASKET (3) OVER CABLE. STRIP CABLE AS SHOWN. DO NOT NICK BRAID WHILE CUTTING JACKET. TAPER END OF BRAID TO PERMIT ASSEMBLY OF BRAID CLAMP (4). SLIDE BRAID CLAMP (4) OVER ASSEMBLY PROCEDURES CAD FILE 062303 SCALE N/A SIZE A XXXX NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. 75 Ohm BNC Female Connector Clamp/Solder Attachment 4 Hole Flange For RG59, .500 inch Threaded Hole Spacing PE4623 CAD Drawing 3