Z-Power LED X10490 Technical Data Sheet Specification AN4240 module (Preliminary) SSC Drawn Approval 고객명 Approval Rev. 03 1 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00) Z-Power LED X10490 Technical Data Sheet Contents 1. Part number 2. Outline dimensions 3. Characteristics 4. Bin & Resistor Value Rev. 03 2 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00) Z-Power LED X10490 Technical Data Sheet Part number of AN4240 module 1. Part Number form : A X1 X2 X3 X4 X5 X1 Color N Warm white X2 Acriche series 4 A4 series X3 Lens type 2 Dome type 0 100V(AC) 1 110V(AC) 2 220V(AC) 3 230V(AC) 4 50,55V, RMS (Emitter) 1 4W Compact 2 4W Square 3 4W Line 4 8W Bulb X4 X5 Voltage PCB type For more information about binning and labeling, refer to the Application Note -1 Rev. 03 3 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00) Z-Power LED X10490 Technical Data Sheet Outline dimensions 1. AN4211 Notes : [1] All dimensions are in millimeters. (Tolerance : ±0.2) [2] Scale : none [3] The appearance and specifications of the product may be changed for improvement without notice Rev. 03 4 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00) Z-Power LED X10490 Technical Data Sheet Outline dimensions 2. AN4221 Notes : [1] All dimensions are in millimeters. (Tolerance : ±0.2) [2] Scale : none [3] The appearance and specifications of the product may be changed for improvement without notice Rev. 03 5 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00) Z-Power LED X10490 Technical Data Sheet Outline dimensions 3. AN4212 Notes : [1] All dimensions are in millimeters. (Tolerance : ±0.2) [2] Scale : none [3] The appearance and specifications of the product may be changed for improvement without notice Rev. 03 6 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00) Z-Power LED X10490 Technical Data Sheet Outline dimensions 4. AN4222 Notes : [1] All dimensions are in millimeters. (Tolerance : ±0.2) [2] Scale : none [3] The appearance and specifications of the product may be changed for improvement without notice Rev. 03 7 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00) Z-Power LED X10490 Technical Data Sheet Outline dimensions 5. AN4213 Notes : [1] All dimensions are in millimeters. (Tolerance : ±0.2) [2] Scale : none [3] The appearance and specifications of the product may be changed for improvement without notice Rev. 03 8 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00) Z-Power LED X10490 Technical Data Sheet Outline dimensions 6. AN4223 Notes : [1] All dimensions are in millimeters. (Tolerance : ±0.2) [2] Scale : none [3] The appearance and specifications of the product may be changed for improvement without notice Rev. 03 9 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00) Z-Power LED X10490 Technical Data Sheet Outline dimensions 7. AN4214 Notes : [1] All dimensions are in millimeters. (Tolerance : ±0.2) [2] Scale : none [3] The appearance and specifications of the product may be changed for improvement without notice Rev. 03 10 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00) Z-Power LED X10490 Technical Data Sheet Outline dimensions 8. AN4224 Notes : [1] All dimensions are in millimeters. (Tolerance : ±0.2) [2] Scale : none [3] The appearance and specifications of the product may be changed for improvement without notice Rev. 03 11 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00) Z-Power LED X10490 Technical Data Sheet Characteristics of AN4240 module 1. AN4211/AN4212/AN4213 1-1 Electro-Optical characteristics at 110V[RMS] Ta=25ºC Parameter Symbol Value Unit Min Typ Max ФV [2] - 200 - lm Фl - - - lx CCT - 3000 - K CRI Ra - 85 - - Operating Current Iopt - 40 - mA [RMS] Power Dissipation PD 4 W Operating Frequency Freq 50 / 60 Hz Luminous Flux Illuminance [1] [3] Correlated Color Temperature [4] 1-2 Absolute Maximum Ratings Parameter Symbol Value Unit Power Dissipation PD - W Junction Temperature Tj 125 ºC Operating Temperature Topr -30 ~ +85 ºC Storage Temperature Tstg -40 ~ +120 ºC ESD Sensitivity - ±6,000V HBM - *Notes : [1] Acriche series maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Illuminance is measured at 50cm distance [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [5] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of solder pad should be below 70 ℃. Rev. 03 12 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00) Z-Power LED X10490 Technical Data Sheet Characteristics of AN4240 module 2. AN4221/AN4222/AN4223 2-1 Electro-Optical characteristics at 220V[RMS] Ta=25ºC Parameter Symbol Value Unit Min Typ Max ФV [2] - 200 - lm Фl - - - lx CCT - 3000 - K CRI Ra - 85 - - Operating Current Iopt - 20 - mA [RMS] Power Dissipation PD 4 W Operating Frequency Freq 50 / 60 Hz Luminous Flux Illuminance [1] [3] Correlated Color Temperature [4] 2-2 Absolute Maximum Ratings Parameter Symbol Value Unit Power Dissipation PD - W Junction Temperature Tj 125 ºC Operating Temperature Topr -30 ~ +85 ºC Storage Temperature Tstg -40 ~ +120 ºC ESD Sensitivity - ±6,000V HBM - *Notes : [1] Acriche series maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Illuminance is measured at 50cm distance [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [5] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of solder pad should be below 70 ℃. Rev. 03 13 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00) Z-Power LED X10490 Technical Data Sheet Characteristics of AN4240 module 3. AN4214 3-1 Electro-Optical characteristics at 110V[RMS] Ta=25ºC Parameter Symbol Value Unit Min Typ Max ФV [2] - 400 - lm Фl - - - lx CCT - 3000 - K CRI Ra - 85 - - Operating Current Iopt - 80 - mA [RMS] Power Dissipation PD 8 W Operating Frequency Freq 50 / 60 Hz Luminous Flux Illuminance [1] [3] Correlated Color Temperature [4] 3-2 Absolute Maximum Ratings Parameter Symbol Value Unit Power Dissipation PD - W Junction Temperature Tj 125 ºC Operating Temperature Topr -30 ~ +85 ºC Storage Temperature Tstg -40 ~ +120 ºC ESD Sensitivity - ±6,000V HBM - *Notes : [1] Acriche series maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Illuminance is measured at 50cm distance [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [5] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of solder pad should be below 70 ℃. Rev. 03 14 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00) Z-Power LED X10490 Technical Data Sheet Characteristics of AN4240 module 4. AN4224 4-1 Electro-Optical characteristics at 220V[RMS] Ta=25ºC Parameter Symbol Value Unit Min Typ Max ФV [2] - 400 - lm Фl - - - lx CCT - 3000 - K CRI Ra - 85 - - Operating Current Iopt - 40 - mA [RMS] Power Dissipation PD 8 W Operating Frequency Freq 50 / 60 Hz Luminous Flux Illuminance [1] [3] Correlated Color Temperature [4] 4-2 Absolute Maximum Ratings Parameter Symbol Value Unit Power Dissipation PD - W Junction Temperature Tj 125 ºC Operating Temperature Topr -30 ~ +85 ºC Storage Temperature Tstg -40 ~ +120 ºC ESD Sensitivity - ±6,000V HBM - *Notes : [1] Acriche series maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Illuminance is measured at 50cm distance [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [5] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of solder pad should be below 70 ℃. Rev. 03 15 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00) Z-Power LED X10490 Technical Data Sheet VF Bin & Resistor Value AN4211 AN4212 AN4213 AN4221 AN4222 AN4223 AN4214 AN4224 VF Bin R1, R3 R2, R4 A 3000 3000 B 2700 3000 C 2000 3300 D 2000 2700 VF Bin R1 R2 A 1500 1500 B 1000 1800 C 1000 1500 D 1000 1300 VF Bin R1, R3, R5, R7 R2, R4, R6, R8 A 3000 3000 B 2700 3000 C 2000 3300 D 2000 2700 VF Bin R3, R5 R1, R4 R2, R6 A 820 4420 4420 B 430 3900 4300 C 820 3600 3600 D 820 3000 3000 Rev. 03 16 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00) Z-Power LED X10490 Technical Data Sheet Precaution for use [1] Acriche series run on high voltage such as 110 V or 220 V. [2] Please don't touch the PCB surface, which has built-in terminals and chips, with your hands or metals, while Acriche series is running. [3] Please don't add or change wires,while Acriche series is running. [4] LED ASS’Y should be attached to customer product properly and be careful twist or bend when it is assembled. [5] LED ASS’Y should be kept from mechanical or electrical shock cause physical damage to the module. [6] Do not disassemble the module. [7] During processing, mechanical stress on the surface should be minimized as much as possible. Sharp object of all types should not be used to pierce the LED resin. ESD protection (1) Ionizer, earthing and keeping appropriate humidity are necessary for work environment. (2) Anti-static glove and grounded band must be used. Storage (1) Do not leave the module in high temperature and humidity conditions. Normal condition is recommended to store the moudule. ( 0°C ≤ Ta ≤ 70°C , relative humidity ≤ 70% ) (2) Keep the module out of the direct rays of the sun. Operation The module should be operated under the given forward voltage. When the module is operated in the excessive voltage or current conditions, the LEDs mounted on the PCB could be burned out. Rev. 03 17 February 2011 www.acriche.com 서식번호 : SSC-QP-7-07-25 (Rev.00)