Data Sheet - Seoul Semiconductor

Z-Power LED
X10490
Technical
Data
Sheet
Specification
LY530
SSC
Drawn
Approval
CUSTOMER
Approval
Rev. 08
December 2010
www.seoulsemicon.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
CONTENTS
1.
Full code of Lamp LED series
2.
Feature & Application
3.
Absolute Maximum Ratings
4.
Electro Characteristics
5.
Outline Dimension
6.
Optical characteristics
7.
Rank of LY530
8.
Standard of Taping Empty Space
9.
Packing
10.
Soldering
11.
Precaution for use
12.
Reliability Test Item and Condition
Rev. 08
December 2010
www.seoulsemicon.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
1. Full Code of Lamp LED Series
Full code form : X1 X2 X3 X4 X5 X6 X7X8 X9 - X10X11
1. Part Number
- X1 : Model
- X2 : Number of Die *1
- X3 : Color
- X4 : Lens Shape
- X5 : Directivity
- X6 : Revision Symbol
- X7 : High Reliability *2
- X8 : Surface coloring & Diffusion *3
- X9 : Stopper *4
*1, 2, 3, 4 are added to the Product Type only in necessary cases.
2. Internal Number
- X10
- X11
3. Sticker Diagram on Box & Aluminum Vinyl Bag
For more information about binning and labeling, refer to the Application Note -1
Rev. 08
December 2010
www.seoulsemicon.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
LY530
Description
Lamp LEDs are effective in hot
thermal and humid condition.
LY530
Features
• High luminous yellow
emission
• Non-standoff leads
This high brightness and
• 5mm package
weather-resistant packaging
• Transparent epoxy
lens
design makes these Lamp LEDs
ideal for Outdoor applications
• Viewing angle : 30 º
• Dominant Wavelength
: 590nm
such as traffic signals, variable
message signs and backlighting
for transparent sign panels.
Applications
• Electronic signs and
signals
• Specialty lighting
• Small area illumination
• Torches and head
lamps
• Backlighting
• Outdoor displays
Rev. 08
December 2010
www.seoulsemicon.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
3. Absolute maximum ratings
Parameter
Symbol
Value
Unit
DC Forward Current
IF
30
mA
Forward Peak Pulse Current
IFP *1
100
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
78
mW
Operating Temperature
Topr
-40 ~ 100
ºC
Storage Temperature
Tstg
-50 ~ 105
ºC
Solder Temperature
Ts
260ºC for 10seconds *2
ºC
*1 t ≤ 0.1ms, D = 1/10
*2 No lower than 3mm from the base of the epoxy bulb.
4. Electric & Optical characteristics
Parameter
Symbol
Condition
Min
Typ
Max
Unit
Luminous Intensity *3
IV
If=20mA
3000
6000
Luminous Flux
ФV
If=20mA
-
2.0
-
lm
Dominant Wavelength*4
λd
If=20mA
585
590
595
nm
Forward Voltage *5
VF
If=20mA
-
2.2
2.6
V
View Angle
2θ ½
If=20mA
Optical Efficiency
Ŋelc
If=20mA
-
45
-
lm/W
Reverse Current
IR
VR = 5V
-
-
5
μA
mcd
30
Deg.
*3. SSC maintains a tolerance of ±10% on intensity and power measurements.
*4. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram.
A tolerance of ±0.5nm for dominant wavelength.
*5. A tolerance of ±0.05V on forward voltage measurements
[Note] All measurements were made under the standardized environment of SSC.
Rev. 08
December 2010
www.seoulsemicon.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
5.Outline Dimension
Unit : mm
-0.1
0.5 +0.2
1.0
DETAIL
1.0 MAX
ANODE
2.5 ± 0.05
2.6 ± 0.2
1.0 MIN
1.0
5.0 ± 0.2
28.0 MIN
8.7 ± 0.2
5.9 ± 0.2
Notes : Protruded epoxy is 1.0mm maximum.
Rev. 08
December 2010
www.seoulsemicon.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Forward Current vs. Forward Voltage
(Ta=25 OC )
Forward Current(mA)
50
40
30
20
10
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Forward Voltage [V]
Relative Luminous Intensity vs Forward Current
(Ta=25 OC )
4
Relative Luminous Intensity
Z-Power LED
X10490
Technical
Data
Sheet
6. Optical characteristics
3
2
1
0
0
20
40
60
80
100
Forward Current [mA]
Rev. 08
December 2010
www.seoulsemicon.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Radiation Diagram
(Ta=25 OC )
Relative Luminous Intensity
1.0
0.8
0.6
0.4
0.2
0.0
-90
-60
-30
0
30
60
90
Off Axis Angle [deg.]
Ambient Temperature
vs. Maximum Forward Current
(TA=25℃, IF=20mA)
40
Forward Current IF [mA]
Z-Power LED
X10490
Technical
Data
Sheet
6. Optical characteristics
30
20
10
0
-60
-40
-20
0
20
40
60
80
100
120
o
Ambient Temperature Ta[ C]
Rev. 08
December 2010
www.seoulsemicon.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
7. Rank of LY530
Bin Code
Forward Voltage
Dominant
Wavelength
Luminous
Intensity
B
g
3
Forward Voltage (V)
@ IF = 20mA
Dominant Wavelength (nm)
@ IF = 20mA
Luminous Intensity (mcd)
@ IF = 20mA
Bin
Code
Min.
Max.
Bin
Code
Min.
Max.
Bin
Code
Min.
Max.
A
1.9
2.0
g
585
587.5
1
3000
4000
B
2.0
2.1
h
587.5
590
2
4000
4500
C
2.1
2.2
j
590
592.5
3
4500
5500
D
2.2
2.3
k
592.5
595
4
5500
7000
E
2.3
2.4
5
7000
10000
F
2.4
2.5
G
2.5
2.6
Available ranks
8. Standard of Taping Empty Space
Available Empty Space : 2ea
Before
After
*Purpose : Prevention of being Mixed & Reverse mounting
※Before : Insert the right PKG after removing defective product
※After
: Attaching the right PKG on the backside after removing defective
product
Rev. 08
December 2010
www.seoulsemicon.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Unit : mm
* Antistatic poly bag
50
(500pcs max/bag)
95
170
* Inner box
(1bag max/box)
325
Z-Power LED
X10490
Technical
Data
Sheet
9. Packing
27
0
* Cardboard box
(35000pcs max/box)
(70boxes max/box)
480
Rev. 08
December 2010
www.seoulsemicon.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
Unit : mm
12.0 ± 0.5
12.7 ± 0.2
0 ± 1.3
0 ± 2.0
0.5 ± 0.1
2.5 ± 0.5
12.7 ± 0.2
18 ± 0.5
13 ± 0.5
9.0 ± 0.5
Max 1.0
…
4.0 ± 0.2
1.5 Max
LXXXX
RANK : XXXX
QTY : 2000pcs
LOT : 20XX.XX.XX
SEOUL SEMICONDUCTOR CO., LTD
1 Box contain quantity.
* 3φ Series : 3000pcs/box
* 5φ Series : 2000pcs/box
Rev. 08
December 2010
www.seoulsemicon.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
10. Soldering
1) Wave Soldering Conditions / Profile
• Preliminary heating to be at 85ºC(120 ºC max) for 20 seconds(60 seconds max).
• Soldering heat to be at 255 ºC (260ºC max) for 10 seconds
• Soak time above 200 ºC is 5 seconds
300
PEAK
250
200
255 ºC (260 ºC max)
O
Temperature [ C]
10s
150
PREHEAT
20s (60s Max)
100
85 ºC(120 ºC max)
50
0
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
T im e [s ]
2) Hand Soldering conditions
• Not more than 3 seconds at max. 350ºC, under Soldering iron.
3) Caution
• The LEDs must not be repositioned after soldering.
• Do not apply any stress to the lead particularly when heat.
Note : In case the soldered products are reused in soldering process, we don’t guarantee the products.
Rev. 08
December 2010
www.seoulsemicon.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
11. Precaution for use
1) Storage
• Before opening the package
a. Avoid the absorption of moisture, we recommended to store the LEDs in a dry
box(or desiccator) with a desiccant . Otherwise, store them in the following environment:
Temperature : 5℃~30℃ Humidity : 50% max.
b. The products should be used in 3 months. It is recommended that the LEDs be used as
soon as possible.
• After opening the package
a. Soldering should be done right after opening the package(within 24Hrs).
b. Keeping of a fraction
- Sealing
- Temperature : 5 ~ 40℃, Humidity : less than 30%
c. If the package has been opened more than 1week or the color of desiccant changes,
Components should be dried for 10-12hr at 60±5℃
• Any mechanical force or any excess vibration shall not be accepted to apply during cooling
process to normal temp. after soldering.
• Avoid quick cooling
• Lead frames are silver plated SPCC. The silver plate surface may be affected by
environments which contains corrosive substances. Please avoid conditions which may cause
the LEDs to corrode, tarnish or discolor.
2) Lead Forming
• When the lead forming is required before soldering , care must be taken to avoid any bending
and mechanical stress. The stress to the base may damage the LEDs.
• When mounting the LEDs onto a PCB, the holes on the circuit board should be exactly
aligned with the leads of the LEDs.
• It is recommended that tooling made to precisely form and cut the leads to length rather than
rely on hand operating.
Rev. 08
December 2010
www.seoulsemicon.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
3) Static Electricity
• Static Electricity and surge voltage damage the LEDs. So it is recommended that a wrist
band or an anti-electrostatic glove be used when handling the LEDs.
• All devices, equipment and machinery must be grounded properly. It is recommended that
precautions should be taken against surge voltage to the equipment that mounts the LEDs.
4) Heat Generation
• Thermal is one of the important parameters to design the end product. Please consider the
heat generation of the LEDs.
• The operating current should be decided after considering the ambient maximum temperature
of LEDs.
5) Others
• The color of the LEDs is changed slightly an operating current and thermal.
• Anti radioactive ray design is not considered for the products listed here.
• Gallium arsenide is used in some of the products listed in this publication. These products
are dangerous if they are burned or smashed in the process of disposal. It is also dangerous
to drink the liquid or inhale the gas generated by such products when chemically disposed.
• This device should not be used in any type of fluid such as water, oil, organic solvent and etc.
When washing is required, IPA(Isopropyl Alcohol) should be used.
• When the LEDs are illuminating, operating current should be decided after considering the
junction temperature.
Cf.) Please refer Ambient temperature vs. Forward Current graph on page 5
• The appearance and specifications of the product may be modified for improvement without
notice.
Rev. 08
December 2010
www.seoulsemicon.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
12. Reliability Test Item and Condition
Item
Condition
Note
Failures
Life Test
Ta = RT, IF = 30mA
1000hrs
0/22
High Temperature Operating
Ta = 100ºC, IF = 10mA
1000hrs
0/22
Low Temperature Operating
Ta = -40ºC, IF = 20mA
1000hrs
0/22
Thermal Shock
Ta = -50ºC (30min) ~ 105º (30min)
(Transfer time : 10sec, 1Cycle = 1hr)
100
cycles
0/40
Resistance to soldering Heat
Ts = 255 ± 5ºC, t = 10sec
1 time
0/22
ESD
(Human Body Model)
1kV, 1.5kΩ ; 100pF
1 time
0/22
High Temperature Storage
Ta = 105ºC
1000hrs
0/22
Low Temperature Storage
Ta = -50ºC
1000hrs
0/22
Temperature Humidity
Storage
Ta = 85ºC, RH = 85%
1000hrs
0/22
Temperature Humidity
Operating
Ta = 85ºC, RH = 85%, IF = 15mA
100hrs
0/22
< Judging Criteria For Reliability Tests >
VF
USL[1] X 1.2
IR
USL X 2.0
ФV
LSL [2] X 0.7
Notes :
[1] USL : Upper Standard Level
[2] LSL : Lower Standard Level.
Rev. 08
December 2010
www.seoulsemicon.com
Document No. : SSC-QP-7-07-24 (Rev.00)