LL06CR-CKxxL-Mx Data Sheet For Cree XR-E

LL06CR-CKxxL-Mx Data Sheet
For CREE Multi-Color and Single-Color LEDs
Features:
• High efficiency
• Available in 2 beam Patterns
• Optimized for uniform effects
• Lens with Housing
Typical applications :
• Stage Lighting
• Street Lights
• Decorative Light
• Architectural Lighting
• Down Light
Table of Contents
General Information................................................................................................................................................................................. 2
General Specifications............................................................................................................................................................................. 2
Optical Specifications.............................................................................................................................................................................. 3
Mechanical Specifications...................................................................................................................................................................... 4
Illumination charts.................................................................................................................................................................................... 5
Package Specifications........................................................................................................................................................................... 6
Product Nomenclature........................................................................................................................................................................... 7
www.ledlink-optics.com
General Information
• Compatible Led Type :
The L L 0 6 C R - C K x x L - M x 6 in1 lenses are optimized for both Multi-Color R.G.B CREE LEDs and
Single-Color Cree LEDs (Cree XR-E White)from Cree Opto.(1)
• Beam Angle Type :
An optimized profile integrate different front shape enable the generation of two different
lens models: smallest beam (10deg); medium beam (25deg)
(2)
• The Way to Assembly :
The Lens should be assembled to the PCB board or MCPCB upon LEDs which provides the most
appropriate related position, so as to achieve the best uniform results
* Manually installation or if necessary thermal glue are recommended.
• Function :
L L 0 6 C R - C K x x L - M x provides exceptional color mixing result with the highest efficiency through
careful engineering and precision manufacturing process.
*Lens holders are available in Black, white and clear.
• Lens Material
Optical Grade PMMA PC
• Operating Temperature range
-40˚C ~ + 70˚C (upper limit +80˚C)
• Storage Temperature range
-40˚C ~ + 70˚C (upper limit +80˚C)
*Average transmittance in visible spectrum 400nm~700nm> 90%
Notes:
(1) Cree XR-E is a trademark of Cree,Inc , for technical information on LEDs, please refer to Cree,Inc, www.cree.com/xlamp.
(2) Typical beam divergence will be affected by different color of LEDs.
Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice.
www.ledlink-optics.com
Optical Specifications [ Typical beam Angle and intensity (cd/lm) of LL06 lenses ]
• CREE XR-E LED
Typical Cone Angle (degree)(3) with CREE XR-E
Part Number
Red LEDs
Green LEDs
Blue LEDs
LL06CR-CK10L-M2
13
17
20
LL06CR-CK25L-M2
47
44
44
The typical cone angle measures where the luminous intensity is 90% of the peak value of intensity.This typical cone varies with
LED color due to different chip size and chip position tolerance.
Typical on axis intensity (cd/6w)(4) with CREE XR-E
Part Number
Red LEDs
Green LEDs
Blue LEDs
LL06CR-CK10L-M2
2580
10200
1380
LL06CR-CK25L-M2
510
2160
240
Luminous intensity depends on the flux binning and tolerance of the LEDs. Please refer to the LEDs data sheet for more details on
Flux binning and mechanical tolerance.
• CREE XR-E LED
Typical Cone Angle (degree)(3) with CREE XR-E
Part Number
White LEDs
Warm white LEDs
LL06CR-CK10L-M2
16
17
LL06CR-CK25L-M2
35
32
The typical cone angle the full angle measured where the luminous intensity is 90% of the peak value of intensity. That typical
cone varies with LED color due to different chip size and chip position tolerance.
Typical on axis intensity (cd/6w)(4) with CREE XR-E
Part Number
White LEDs
Warm white LEDs
LL06CR-CK10L-M2
8700
7080
LL06CR-CK25L-M2
4200
2400
Luminous intensity depends on the flux binning and tolerance of the LEDs. Please refer to the LEDs data sheet for more detail on
Flux binning and mechanical tolerance
Notes:
(3) The typical divergence will be changed by different color, chip size and chip position tolerance.The typical total divergence is the full angle measured where the
luminous intensity is half of the peak value.
(4) The efficiency value listed above is the total value of the whole lens model, the value depends on the total flux of the LED used. Luminous intensity depends on
the LEDs flux and its tolerances, for more details of LED flux, please check Cree data sheet at www.cree.com.
Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice.
www.ledlink-optics.com
• Usage and Maintenance :
1. If necessary, clean lenses with mild soap, water and soft cloth
2. Never use any commercial cleaning solvents on lenses, like alcohol
3. Please handle or install lenses with wearing gloves, skin oils may damage lens or its optical characteristic.
1. Lens + Leds+MCPCB assembly instruction
3. Lens dimensions and Top Views:
12
0°
0.90±0.30
1
Lens
30°
1
39°
15°
Holder
PCB Board
7.60±0.1
2. View assembly lens with MCPCB:
6.52±0.1
10.40±0.1
1.10±0.1
13.30±0.1
CREE XR-E LED
4. Lens assembly dimensions and Top Views :
1
1
1
1
1
1
1
Notes:
(1) All dimensions are in mm.
(2) Drawing not to scale.
(3) Collimator material is PMMA.
Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice.
www.ledlink-optics.com
Illumination charts
*CREE 6 in1 white LED: CREE XR-E
LL06CR-CK10L-M2
LL06CR-CK25L-M2
1. Beam Pattern
1. Beam Pattern
2. Light Distribution Curve
2. Light Distribution Curve
100
100
80
80
60
60
40
40
20
20
0
-90 -75 -60 -45 -30 -15 0
15 30 45 60 75 90
3. Illuminance
0
-90 -75 -60 -45 -30 -15 0
15 30 45 60 75 90
3. Illuminance
102.5 x
1m
52.5 x
1m
33.5 x
2m
10.5 x
2m
15.0 x
3m
6.0 x
Notes: The Flux of CREE XR-E LED is 85 lm
Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice.
3m
www.ledlink-optics.com
Package
Item
Quantity
Inner box
16
Outer box
10tray/box
2 inner box/outer box
Outer box
Total
Size (long*width* high)
16pcs
34*30*3.5 cm
160pcs
35*31*21 cm
320pcs
64.7*36.5*24 cm
16pcs/tray
160pcs/inner box
ITEM NO.:
QTY:
G.W.:
N.W.:
MEAS:
KGS
KGS
320pcs/outer box
Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice.
www.ledlink-optics.com
Product Nomenclature
X6:Type
L:Lens
X7: Assemblies
M: Lens+Housing
X8:Housing Color
1: Black
2: White
3:Clear
LL 06 CR- CK xx L - M x
X1
X2
X3
X4
X5
X6
X7
X8
The material number
has no this part without
housing.
X5:Lens Angle
8,10,15,15*50 ,25,30,40,45,60,70,80,25*45
X4:Serial Number
AA,AB,AC,AD,AE,AF,AG,AH
X3:Led Type
ED:Edixeon CR:CREE OSRAM:OS LUXEON:LU
X2:Lens Q’ty
01,02,03,04,06,07,09,12,24,36
X1:Lens Item
Ledlink
Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice.