Double-level terminals Terminals, W-Series WDK 2.5N Identically contoured design of 2.5 to 10 mm² with identical end plates and partitions. An unmatched combination of many advantages! The compact terminals are impressive for their small size and rated cross-section capacity. 2.5 mm² Plug-in cross-connection Compact design WDK 2.5N V 2.5 mm² Both levels at one potential Compact design In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm² mm² Technical data D 5.1 x 60.7 x 62.45 28 / 4 0.05...4 IEC 60947-7-1 Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Tightening torque range (terminal screw) Stripping length / Blade size 2 conductors with same cross-section (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule V A mm² IEC 800 24 2.5 ru#a Ex e II T 5.1 x 60.7 x 62.45 28 / 4 0.05...4 II 2 G D UL CSA EN 60079-7 600 (C) 300 (C) 550 20 (C) 20 (C) 21 AWG 26...12 AWG 26...12 2.5 8 kV / 3 A3 / V-0 KEMA 00ATEX2061 U IEC 60947-7-1 IEC 800 24 2.5 ru#a Ex e II T II 2 G D UL CSA EN 60079-7 600 (C) 300 (C) 550 20 (C) 20 (C) 21 AWG 26...12 AWG 26...12 2.5 8 kV / 3 A3 / V-0 KEMA 00ATEX2061 U mm/- Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...2.5 0.4...0.6 Nm (M 2.5) 8 / 0.6 x 3.5 mm mm² mm² 0.5...1.5 0.5...1.5 / 0.5...1.5 0.5...1.5 0.5...1.5 / 0.5...1.5 The rated voltage is reduced to 400 V when using the cross-connection ZQV 2.5N. The rated voltage is reduced to 400 V when using the cross-connection ZQV. Type WDK 2.5N WDK 2.5N BL Order No. 1041600000 1041680000 Type WDK 2.5N V mm² mm² Note Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...2.5 0.4...0.6 Nm (M 2.5) 8 / 0.6 x 3.5 mm Ordering data Version Dark beige Wemid Blue Wemid Qty. 100 100 Note Qty. 100 Order No. 1041610000 Accessories Pluggable cross-connection Screwable cross-connection End plate / Partition plate End bracket Screwdriver Cover Identification systems Type ZQV 2.5N/2 GE ZQV 2.5N/3 GE ZQV 2.5N/4 GE ZQV 2.5N/10 GE ZQV 2.5N/20 GE current 24 A 24 A 24 A 24 A 24 A Qty. 60 60 60 20 20 Order No. 1693800000 1693810000 1693820000 1693880000 1909000000 Type ZQV 2.5N/2 GE ZQV 2.5N/3 GE ZQV 2.5N/4 GE ZQV 2.5N/10 GE ZQV 2.5N/20 GE current 24 A 24 A 24 A 24 A 24 A Qty. 60 60 60 20 20 Order No. 1693800000 1693810000 1693820000 1693880000 1909000000 Dark beige Wemid Blue Wemid Dark beige Wemid WAP WDK2.5/4 N WAP WDK2.5/4 N BL WTW EN Width 1.5 mm 1.5 mm 3 mm 20 20 20 1084000000 1084080000 1058800000 WAP WDK2.5/4 N WAP WDK2.5/4 N BL WTW EN Width 1.5 mm 1.5 mm 3 mm 20 20 20 1084000000 1084080000 1058800000 Dark beige Wemid WEW 35/1 12 mm 50 1059000000 WEW 35/1 12 mm 50 1059000000 2-pole 3-pole 4-pole 10-pole 20-/24-pole 2-pole 3-pole 4-pole 10-pole Standard With lightning flash symbol Blank, white (see assortment in catalogue 7) Marking tags DEK 5/5 / WS 8/5 DEK 5/5 / WS 8/5 Note D.18 1282250000 – 2012/2013 Double-level terminals 2.5 mm² Lower level earthed on terminal rail Compact design IEC 800 24 2.5 ru#a 4 mm² Plug-in cross-connection Compact design 5.1 x 60.7 x 62.45 28 / 4 0.05...4 Ex e II T II 2 G D UL CSA EN 60079-7 600 (C) 600 (D) 550 20 (C) 5 (D) 21 AWG 26...12 AWG 26...12 2.5 8 kV / 3 A3 / V-0 KEMA 00ATEX2061 U Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...2.5 0.4...0.6 Nm (M 2.5) 8 / 0.6 x 3.5 mm IEC 60947-7-1 IEC 800 32 4 r u#a Rated connection 0.5...6 / 1.5...6 0.5...4 / 0.5...4 0.5...1 Nm (M 3) 8 / 0.6 x 3.5 mm WDK 4N V 4 mm² Both levels at one potential Compact design 6.1 x 60 x 64.15 35 / 6 0.13...6 PE IEC 60947-7-1 (-7-2) WDK 4N Ex e II T Terminals, W-Series WDK 2.5N DU-PE 6.1 x 60.7 x 64.15 35 / 6 0.13...6 II 2 G D UL CSA EN 60079-7 600 (C) 300 (C) 550 35 (C) 30 (C) 28 AWG 26...10 AWG 26...10 4 8 kV / 3 A4 / V-0 KEMA 00ATEX2061 U IEC 60947-7-1 IEC 800 32 4 ru#a Rated connection 0.5...6 / 1.5...6 0.5...4 / 0.5...4 0.5...1 Nm (M 3) 8 / 0.6 x 3.5 mm Ex e II 0.5...1.5 0.5...1.5 / 0.5...1.5 0.5...1.5 0.5...1.5 / 0.5...1.5 0.5...1.5 0.5...1.5 / 0.5...1.5 The rated voltage is reduced to 400 V when using the cross-connection ZQV. It is prohibited to connect two conductors via the PE connection! Rated voltage: 400 V when using ZQV cross-connection 2 wire H07V-U1.5, tighten with 0.6 Nm. Rated voltage: 400 V when using ZQV cross-connection 2 wire H07V-U1.5, tighten with 0.6 Nm. Type WDK 2.5N DU-PE Order No. 1041650000 Type WDK 4N WDK 4N BL Qty. 100 Qty. 100 100 Order No. 1041900000 1041980000 Type WDK 4N V T II 2 G D UL CSA EN 60079-7 600 (C) 300 (C) 550 35 (C) 30 (C) 28 AWG 26...10 AWG 26...10 4 8 kV / 3 A4 / V-0 KEMA 00ATEX2061 U Qty. 100 Order No. 1041910000 Type ZQV 2.5N/2 GE ZQV 2.5N/3 GE ZQV 2.5N/4 GE ZQV 2.5N/10 GE ZQV 2.5N/20 GE current 24 A 24 A 24 A 24 A 24 A Qty. 60 60 60 20 20 Order No. 1693800000 1693810000 1693820000 1693880000 1909000000 Type ZQV 4N/2 GE ZQV 4N/3 GE ZQV 4N/4 GE ZQV 4N/10 GE ZQV 4N/20 GE current 32 A 32 A 32 A 32 A 32 A Qty. 60 60 60 20 20 Order No. 1758250000 1762630000 1762620000 1758260000 1909020000 Type ZQV 4N/2 GE ZQV 4N/3 GE ZQV 4N/4 GE ZQV 4N/10 GE ZQV 4N/20 GE current 32 A 32 A 32 A 32 A 32 A Qty. 60 60 60 20 20 Order No. 1758250000 1762630000 1762620000 1758260000 1909020000 WAP WDK2.5/4 N WAP WDK2.5/4 N BL WTW EN Width 1.5 mm 1.5 mm 3 mm 20 20 20 1084000000 1084080000 1058800000 WAP WDK2.5/4 N WAP WDK2.5/4 N BL WTW EN Width 1.5 mm 1.5 mm 3 mm 20 20 20 1084000000 1084080000 1058800000 WAP WDK2.5/4 N WAP WDK2.5/4 N BL WTW EN Width 1.5 mm 1.5 mm 3 mm 20 20 20 1084000000 1084080000 1058800000 WEW 35/1 12 mm 50 1059000000 WEW 35/1 12 mm 50 1059000000 WEW 35/1 12 mm 50 1059000000 DEK 5/5 / WS 8/5 1282250000 – 2012/2013 DEK 5/6 / WS 8/6 DEK 5/6 / WS 8/6 Test plug and socket, see section “W-Series accessories” Ensure 2.5 mm² max. when using the WQB. Test plug and socket, see section “W-Series accessories” Ensure 2.5 mm² max. when using the WQB. D D.19 Double-level terminals 10 mm² WDK 10 V 10 mm² NEW NEW Terminals, W-Series WDK 10 In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm² mm² Technical data 9.9 x 85 x 69.5 76 / 16 1.5...16 9.9 x 85 x 69.5 76 / 16 1.5...16 IEC 60947-7-1 IEC 60947-7-1 Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Tightening torque range (terminal screw) Stripping length / Blade size 2 conductors with same cross-section (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule IEC 800 57 10 V A mm² UL CSA 600 (C) 600 (C) 64 (C) 64 (C) AWG 18...6 AWG 18...6 8 kV / 3 B6 / V-0 IEC 800 57 10 ra mm² mm² mm/- UL CSA 600 (C) 600 (C) 49 (C) 49 (C) AWG 18...6 AWG 18...6 8 kV / 3 B6 / V-0 D ra Rated connection 1.5...16 / 1.5...16 1.5...16 / 1.5...16 1.5...2.4 Nm (M 4) 12 / 1.0 x 5.5 mm Rated connection 1.5...16 / 1.5...16 1.5...16 / 1.5...16 1.5...2.4 Nm (M 4) 12 / 1.0 x 5.5 mm mm² mm² Note Ordering data Version Dark beige Wemid Blue Wemid Type WDK 10 WDK 10 BL Qty. 50 50 Note Order No. 1186740000 1186750000 Type WDK 10 V WDK 10 V BL Order No. Type current Qty. 50 50 50 20 1052560000 1054960000 1055060000 1052460000 20 20 1186720000 1186730000 50 1059000000 1 9008350000 Qty. 50 50 Order No. 1186770000 1186780000 Accessories Pluggable cross-connection Screwable cross-connection End plate / Partition plate End bracket Screwdriver Cover Identification systems 2-pole 3-pole 4-pole 10-pole 20-/24-pole 2-pole 3-pole 4-pole 10-pole Type current Qty. WQV 10/2 WQV 10/3 WQV 10/4 WQV 10/10 50 50 50 20 1052560000 1054960000 1055060000 1052460000 WQV 10/2 WQV 10/3 WQV 10/4 WQV 10/10 20 20 1186720000 1186730000 WAP WDK10 WAP WDK10 BL 57 A 57 A 57 A 57 A Width 1.5 mm 1.5 mm 50 1059000000 WEW 35/1 12 mm 1 9008350000 SDS 1.0X5.5X150 Dark beige Wemid Blue Wemid Dark beige Wemid WAP WDK10 WAP WDK10 BL 57 A 57 A 57 A 57 A Width 1.5 mm 1.5 mm Dark beige Wemid WEW 35/1 12 mm Standard SDS 1.0X5.5X150 Order No. With lightning flash symbol Blank, white (see assortment in catalogue 7) Marking tags DEK 5/5 DEK 5/5 Note 1282250000 – 2012/2013 D.21