Data Sheet - Hittite Microwave

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC814LC3B
v02.0614
FREQ. MULTIPLIERS - ACTIVE - SMT
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 13 - 24.6 GHz OUTPUT
Typical Applications
Features
The HMC814LC3B is ideal for:
High Output Power: +17 dBm
• Clock Generation Applications:
SONET OC-192 & SDH STM-64
Low Input Power Drive: 0 to +6 dBm
• Point-to-Point & VSAT Radios
Fo Isolation: >20 dBc @ Fout = 19 GHz
100 kHz SSB Phase Noise: -136 dBc/Hz
• Test Instrumentation
Single Supply: +5V @ 88 mA
• Military & Space
12 Lead 3x3 mm SMT Package: 9 mm²
• Sensors
Functional Diagram
General Description
The HMC814LC3B is a x2 active broadband frequency multiplier utilizing GaAs pHEMT technology
in a leadless RoHS compliant SMT package. When
driven by a +4 dBm signal, the multiplier provides
+17 dBm typical output power from 13 to 24.6 GHz.
The Fo, 3Fo and 4Fo isolations are >20 dBc at 19 GHz.
The HMC814LC3B is ideal for use in LO multiplier
chains for Pt-to-Pt & VSAT Radios yielding reduced
parts count vs. traditional approaches. The low additive SSB Phase Noise of -136 dBc/Hz at 100 kHz
offset helps maintain good system noise performance. The RoHS packaged HMC814LC3B eliminates the need for wire bonding, and allows the use of
surface mount manufacturing techniques.
Electrical Specifications, TA = +25° C, Vdd1, Vdd2 = +5V, +4 dBm Drive Level
Parameter
Min.
Frequency Range, Input
Frequency Range, Output
Output Power
14
Fo Isolation (with respect to output level)
3Fo Isolation (with respect to output level)
Max.
Units
GHz
13 - 24.6
GHz
17
dBm
25
dBc
25
dBc
Input Return Loss
4
10
dB
Output Return Loss
6
12
dB
-136
dBc/Hz
SSB Phase Noise (100 kHz Offset @ Input Frequency = 19 GHz)
Supply Current (Idd1 & Idd2)
1
Typ.
6.5 - 12.3
70
88
100
mA
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC814LC3B
v02.0614
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 13 - 24.6 GHz OUTPUT
25
16
15
12
+25C
+85C
-40C
8
4
5
-15
-25
0
12.5
0 dBm
1 dBm
2 dBm
3 dBm
4 dBm
5 dBm
6 dBm
-5
14.5
16.5
18.5
20.5
22.5
24.5
12.5
26.5
14.5
16.5
20
16
10
12
4.5V
5.0V
5.5V
4
22.5
24.5
26.5
24.5
26.5
Fo
2Fo
3Fo
4Fo
0
-10
-20
0
12.5
20.5
Isolation @ +4 dBm Drive Level
20
OUTPUT POWER (dBm)
OUTPUT POWER (dBm)
Output Power vs.
Supply Voltage @ +4 dBm Drive Level
8
18.5
FREQUENCY (GHz)
FREQUENCY (GHz)
-30
14.5
16.5
18.5
20.5
22.5
24.5
26.5
12.5
14.5
16.5
FREQUENCY (GHz)
18.5
20.5
22.5
FREQ. MULTIPLIERS - ACTIVE - SMT
Output Power vs. Drive Level
20
OUTPUT POWER (dBm)
OUTPUT POWER (dBm)
Output Power vs.
Temperature @ +4 dBm Drive Level
FREQUENCY (GHz)
Output Power vs. Input Power
20
OUTPUT POWER (dBm)
15
10
5
0
15 GHz
19 GHz
23 GHz
24 GHz
-5
-10
-15
-20
0
1
2
3
4
5
6
7
8
9
10
INPUT POWER (dBm)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]ittite.com
2
HMC814LC3B
v02.0614
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 13 - 24.6 GHz OUTPUT
Output Return Loss vs. Temperature
Input Return Loss vs. Temperature
0
-5
+25C
+85C
-40C
-5
RETURN LOSS (dB)
RETURN LOSS (dB)
-10
-15
+25C
+85C
-40C
-20
-10
-15
-20
-25
-30
-25
6
7
8
9
10
11
12
13
12.5
14.5
16.5
FREQUENCY (GHz)
18.5
20.5
22.5
24.5
26.5
FREQUENCY (GHz)
Phase Noise @ 19 GHz
-10
-30
PHASE NOISE (dBc/Hz)
FREQ. MULTIPLIERS - ACTIVE - SMT
0
-50
-70
-90
-110
-130
-150
-170
2
10
10
3
10
4
10
5
10
6
10
7
10
8
FREQUENCY (Hz)
3
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC814LC3B
v02.0614
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 13 - 24.6 GHz OUTPUT
Typical Supply Current vs. Vdd
RF Input (Vdd = +5V)
+10 dBm
Vdd (Vdc)
Idd (mA)
Supply Voltage (Vdd1, Vdd2)
+5.5 Vdc
4.5
87
Channel Temperature
175 °C
5.0
88
5.5
89
Continuous Pdiss (T= 85 °C)
(derate 8.3 mW/°C above 85 °C)
743 mW
Thermal Resistance
(channel to ground paddle)
121 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 0 (Passed 150 V)
Note:
Multiplier will operate over full voltage range shown above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
FREQ. MULTIPLIERS - ACTIVE - SMT
Absolute Maximum Ratings
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER
50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
HMC814LC3B
Alumina, White
Gold over Nickel
MSL Rating
MSL3
[1]
Package Marking [2]
H814
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
4
HMC814LC3B
v02.0614
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 13 - 24.6 GHz OUTPUT
FREQ. MULTIPLIERS - ACTIVE - SMT
Pin Description
5
Pin Number
Function
Description
1, 3, 7, 9
GND
Package bottom must also be connected
to RF/DC ground.
2
RFIN
This pin is AC coupled
and matched to 50 Ohms.
4 - 6, 11
N/C
These pins are not connected internally; however,
all data shown herein was measured with these pins
connected to RF/ DC ground.
8
RFOUT
This pin is AC coupled
and matched to 50 Ohms.
10, 12
Vdd2, Vdd1
Supply voltage 5V ± 0.5V. External bypass capacitors
of 100 pF, 1,000 pF and 2.2 µF are recommended.
Interface Schematic
Application Circuit
Component
Value
C1, C2
100 pF
C3, C4
1,000 pF
C5, C6
2.2 µF
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC814LC3B
v02.0614
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 13 - 24.6 GHz OUTPUT
FREQ. MULTIPLIERS - ACTIVE - SMT
Evaluation PCB
List of Materials for Evaluation PCB 112409 [1]
Item
Description
J1, J2
PCB Mount SRI K Connector
J3 - J5
DC Pin
C1, C2
100 pF Capacitor, 0402 Pkg.
C3, C4
1,000 pF Capacitor, 0603 Pkg.
C5, C6
2.2 µF Tantalum Capacitor
U1
HMC814LC3B x2 Active Multiplier
PCB [2]
111173 Eval Board
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the application should
be generated with proper RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed
paddle should be connected directly to the ground
plane similar to that shown. A sufficient number of
via holes should be used to connect the top and
bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request.
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
6