SSAH 0.9（H）mm, 1.5mm-travel Surface Mount Type Low-profile type with 0.9mm in height Detector ■ Typical Specifications Items Specifications Rating（max.）（ / min.） （Resistive load） Contact resistance （Initial performance / After lifetime） Slide 1mA 5V DC / 50μA 3V DC 200mΩ max. / 300mΩ max. Operating force Refer to the dimensions. Push Without load 10,000 cycles Operating life With load 10,000 cycles（1mA 5V DC） Rotary Product Line Poles Positions Changeover timing Soldering 1 3 Not specified Reflow Location lug Minimum order unit（pcs.） Japan Export 4,000 16,000 With 1.5 Horizontal Drawing No. SSAH110100 1 SSAH120100 2 Packing Specifications Taping Dual-in-line Package Type Without Products No. Power Travel Operating section （mm） directions Unit:mm 1 case /Japan 1 case /export packing Tape width （mm） 4,000 8,000 16,000 24 428×413×172 Reel size Small size General Use Type 1 reel Export package measurements （mm） Number of packages（pcs.） 25.4 Refer to P.111 for soldering conditions. Big size General Use Type ø380 77 SSAH 0.9（H）mm, 1.5mm-travel Surface Mount Type Detector Dimensions Unit:mm No. PC board mounting hole and land dimensions （Viewed from the direction A） Style Slide With boss ① Push 2le ho 1.6 Rotary 1 1 9.1 7 Power Dual-in-line Package Type J J J J Terminal No.① Small size General Use Type 1 1 1 0.4 1.1 1.9 0.7 1.6 1.2 1 1 1 1.5 a 1.5 b c Travel 0.9 0.44 1.5 0.5 9.5 aJ b } 0.9N cJb bJ a } 1.2N bJ c Circuit Diagram（Viewed from Direction A） c 1 2 3 4 0.5 3 0.1 0.7 15 1.2 0. C Big size General Use Type 1 2 A 78 1.9 9 0.7 1.1 . ø0 1 1 1 PC board mounting face 9.1 1 1 Slide Switches List of Varieties SSAG SSSS7 Horizontal ● ● ● ● ● ● Vertical — — ● — — — 1-2 ● — ● ● — ● 1-3 — ● ● — ● ● 1-4 — — — — — — 2-2 — — ● — — — 2-3 — — ● — — — 2-4 — — — — — — 4-2 — — — — — — 1.4 1.5 1.5, 2 2 1.5 2 Photo Actuator direction Poles-positions Travel（mm） Automotive use −10℃ to ＋60℃ −30℃ to ＋60℃ −40℃ to ＋85℃ ̶ ̶ ̶ 10mA 5V DC 1mA 5V DC 0.3A 5V DC −40℃ to ＋85℃ ̶ ̶ Life cycle Rating（max.） （Resistive load） Rating（min.） （Resistive load） Operating life with load Load: as rating Initial contact resistance 50μA 3V DC 10,000 cycles 500mΩ max. 10,000 cycles 300mΩ max. 300mΩ max. 200mΩ max. Voltage proof 10,000 cycles 100mΩ max. 10,000 cycles 130mΩ max. 30,000 cycles （Lock side） 100,000 cycles （Recoil side） 500mΩ max. 10,000 cycles 130mΩ max. 10Ω max. 200mΩ max. 70mΩ max. 70mΩ max. 100MΩ min. 100V DC 100MΩ min. 500V DC 100V AC for 1minute 500V AC for 1minute Terminal strength Environmental performance 10,000 cycles 100mΩ max. 100,000 cycles 10Ω max. 3N for 1minute Operating direction 10N Pulling direction Cold −40℃ 96h −40℃ 500h −40℃ 96h −20℃ 500h Dry heat 85℃ 96h 85℃ 500h 85℃ 96h 85℃ 500h 40℃, 90 to 95%RH 96h 60℃, 90 to 95%RH 500h Damp heat Page Big size General Use Type Electrical Insulation resistance performance Mechanical performance Actuator strength 0.3A 4V DC Small size General Use Type Durability Operating life without load 10mA 5V DC Dual-in-line Package Type ̶ −10℃ to ＋60℃ Power Operating temperature range Rotary SSAL Push SSSS8※ Slide SSAH Detector SSAJ Series 40℃, 90 to 95%RH 96h 60℃, 90 to 95%RH 240h 60℃, 90 to 95%RH 500h 75 77 79 82 84 87 Slide Switches Soldering Conditions・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 111 Slide Switches Cautions・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 112 Notes 1. ※ The operating temperature range for automotive applications can be raised upon request. Please contact us for details. 2. ● Indicates applicability to all products in the series. 73 Slide Switches Soldering Conditions 200 Push Temperature (C ) A max. B D E 100 1-pole, 3-position Horizontal 1-pole, 2-position 1-pole, 3-position 2-pole, 3-position Vertical 1-pole, 2-position SSAH, SSAG, SSAJ, SSAL, SSSS8 A（℃） 3s max. C B（℃） C（s） D（℃） E（℃） F（s） 230 40 180 150 120 260 250 260 Notes Big size General Use type 1. The condition mentioned above is the temperature on the mounting surface of a PC board. There are cases where the PC board’s temperature greatly differs from that of the switch, depending on the PC board’s material, size, thickness, etc. The above-stated conditions shall also apply to switch surface temperatures. 2. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. Small size General Use type SSSS7 Pre-heating F max. Dual-in-line Package Type Vertical Time (s) Power Series（Reflow type） Rotary Room temperature SSSS2 Slide 300 Detector Example of Reflow Soldering Condition 1. Heating method: Double heating method with infrared heater. 2. T emperature measurement: T hermocouple φ 0.1 to 0.2 CA（K）or CC（T）at soldering portion（copper foil surface）. A heat resisting tape should be used for fixed measurement. 3. Temperature profile Reference for Hand Soldering Series Soldering temperature Soldering time SSSF, SSSU 350±10℃ 3+1/0s SSSS2 350±10℃ 4s max. SSSS9 350±10℃ 3s max. SSAH, SSAG, SSAJ, SSAL 350±5℃ 3s max. SSSS8 330±5℃ 3s max. SSSS7 320±5℃ 3s max. SSAC 300±10℃ 2s max. Reference for Dip Soldering (For PC board terminal types) Series Items Dip soldering Preheating temperature Preheating time Soldering temperature Duration of immersion 100℃ max. 60s max. 260±5℃ 3±1s SSSS9 120℃ max. 60s max. 260±5℃ 5+0/-1s（2 times） SSSF, SSSU 100℃ max. 60s max. 260±5℃ 10±1s/5±1s SSAC 100℃ max. 60s max. 260±5℃ 5±1s SSSS2 111