SSAC 1.5mm-travel, with External Knob Type 1.5mm-travel horizontal type with external type knob Detector ■ Typical Specifications Items Specifications Rating（max.）（ / min.） （Resistive load） 1mA 5V DC/50μA 3V DC 100mΩ max./200mΩ max. Operating force 2-position 3-position 2.5±1.5N a, c → b 2±1.5N b → a, c 2.5±1.5N Without load 10,000 cycles With load 10,000 cycles（1mA 5V DC） Rotary Product Line Actuator direction 1.5 Horizontal Actuator Poles Positions length（mm） Mounting method 2 3.2 2 Changeover timing Minimum order unit（pcs.） Japan Export 100 8,000 Non shorting Press-in 3 Soldering Manual, Dip Not specified Product No. Drawing No. SSAC120100 1 SSAC120200 2 Dual-in-line Package Type Packing Specifications Bulk Number of packages（pcs.） 1 case /Japan 1 case /export packing Export package measurements （mm） 1,600 8,000 400×270×290 Power Travel （mm） Push Operating life Slide Contact resistance （Initial performance / After lifetime） Small size General Use Type Big size General Use Type Refer to P.111 for soldering conditions. 101 SSAC 1.5mm-travel, with External Knob Type Unit:mm No. PC board mounting hole dimensions （Viewed from direction A） Style Slide 2-pole, 2-position 9.5 1.8 max. 0.6 min. Detector Dimensions 2 Push 6-ø0.6 hole 7 7.15 1.5 Travel Rotary 1.5 1.5 9.1 2.1 2.4 3 5.2 3 5 PC board mounting face 2-ø1.1 hole 5.5 0.2 max. 2.5 1 Terminal No.1 0.3 0.3 Power 0.3 1.03 1.5 1.5 9.1 2 3 A 11 1.8 max. 0.6 min. Dual-in-line Package Type 2-pole, 3-position 8-ø0.6 hole 2 2-ø1.1 hole 5.2 3 3 0.3 3 1.5 1.5 10.6 0.3 3 5.5 1.5 1.5 10.6 2.1 2.4 Big size General Use Type Terminal No.1 7.15 5 Small size General Use Type PC board mounting face 2.5 1.5 a b c Travel 10 0.2 max. 1.5 2 A 0.3 1.03 2 3 Circuit Diagram（Viewed from Direction A） 2-pole, 2-position Drawing No.1 C 1 2 3 4 5 6 C 102 2-pole, 3-position Drawing No.2 C 1 2 3 4 5 6 7 8 C Slide Switches List of Varieties SSSS2※1 SSSS9 SSAC SSSF※2 SSSU※2 Horizontal ● ● ● ● ● Vertical ● ● — ● ● Detector Series Photo Slide Actuator direction Push Poles-positions 1-2 ● ● — ● ● 1-3 ● ● — ● ● 1-4 ● — — — — 2-2 ● ● ● ● ● Rotary 2-3 ● ● ● ● ● 2-4 ● — — — — 4-2 — — — ● ● 2 2 1.5 2 3 Travel（mm） Power Operating temperature range Automotive use −40℃ to ＋85℃ −10℃ to ＋60℃ −40℃ to ＋85℃ Dual-in-line Package Type Small size General Use Type — — — — — Rating（max.） （Resistive load） 0.3A 6V DC 0.1A 12V DC 1mA 5V DC 0.1A 30V DC Rating（min.） （Resistive load） 50μA 3V DC 1mA 5V DC 50μA 3V DC 10μA 1V DC Operating life without load 10,000 cycles 100mΩ max.※1 10,000 cycles 60mΩ max. Operating life with load Load: as rating 10,000 cycles 130mΩ max.※1 10,000 cycles 80mΩ max. Initial contact resistance 70mΩ max. 30mΩ max. Life cycle Durability Big size General Use Type Electrical performance Mechanical performance 10,000 cycles 45mΩ max. 10,000 cycles 65mΩ max. 100mΩ max. 25mΩ max. Insulation resistance 100MΩ min. 500V DC 100MΩ min. 100V DC 100MΩ min. 500V DC Voltage proof 500V AC for 1minute 100V AC for 1minute 500V AC for 1minute Terminal strength 3N for 1minute Actuator strength Operating direction 20N 5N for 1minute 30N Pulling direction Cold Environmental performance 10,000 cycles 200mΩ max. 5N 30N −20℃ 96h −40℃ 500h 10N −20℃ 500h −40℃ 500h Dry heat 85℃ 500h 85℃ 96h 85℃ 500h Damp heat 60℃, 90 to 95%RH 500h 40℃, 90 to 95%RH 96h 60℃, 90 to 95%RH 500h Page 90 95 101 103 107 Slide Switches Soldering Conditions・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 111 Slide Switches Cautions・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 112 Note 1. ※ 1. Operating life for SSSS213202 is 100 cycles. 2. ※ 2. The operating temperature range for automotive applications can be raised upon request. Please contact us for details. 3. ● Indicates applicability to all products in the series. 74 Slide Switches Soldering Conditions 200 Push Temperature (C ) A max. B D E 100 1-pole, 3-position Horizontal 1-pole, 2-position 1-pole, 3-position 2-pole, 3-position Vertical 1-pole, 2-position SSAH, SSAG, SSAJ, SSAL, SSSS8 A（℃） 3s max. C B（℃） C（s） D（℃） E（℃） F（s） 230 40 180 150 120 260 250 260 Notes Big size General Use type 1. The condition mentioned above is the temperature on the mounting surface of a PC board. There are cases where the PC board’s temperature greatly differs from that of the switch, depending on the PC board’s material, size, thickness, etc. The above-stated conditions shall also apply to switch surface temperatures. 2. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. Small size General Use type SSSS7 Pre-heating F max. Dual-in-line Package Type Vertical Time (s) Power Series（Reflow type） Rotary Room temperature SSSS2 Slide 300 Detector Example of Reflow Soldering Condition 1. Heating method: Double heating method with infrared heater. 2. T emperature measurement: T hermocouple φ 0.1 to 0.2 CA（K）or CC（T）at soldering portion（copper foil surface）. A heat resisting tape should be used for fixed measurement. 3. Temperature profile Reference for Hand Soldering Series Soldering temperature Soldering time SSSF, SSSU 350±10℃ 3+1/0s SSSS2 350±10℃ 4s max. SSSS9 350±10℃ 3s max. SSAH, SSAG, SSAJ, SSAL 350±5℃ 3s max. SSSS8 330±5℃ 3s max. SSSS7 320±5℃ 3s max. SSAC 300±10℃ 2s max. Reference for Dip Soldering (For PC board terminal types) Series Items Dip soldering Preheating temperature Preheating time Soldering temperature Duration of immersion 100℃ max. 60s max. 260±5℃ 3±1s SSSS9 120℃ max. 60s max. 260±5℃ 5+0/-1s（2 times） SSSF, SSSU 100℃ max. 60s max. 260±5℃ 10±1s/5±1s SSAC 100℃ max. 60s max. 260±5℃ 5±1s SSSS2 111