LM1117-3.3L3

CYStech Electronics Corp.
Spec. No. : C506L3
Issued Date : 2003.03.22
Revised Date :2015.05.13
Page No. : 1/8
1A Low Dropout Positive Voltage Regulator
LM1117L3 series
Features
Description
Adjustable or Fixed Output
●Output Current of 1A
●Low Dropout, 1.4V max at 1A Output Current
●Good Noise Rejection
●Output Current Limiting
●Built-in Thermal Shutdown
●Fast Transient Response
●Pb-free lead plating package
●Can operate using MLCCs in the capacitance range
of 2μF to 10μF
The LM1117 series of positive adjustable and fixed
regulators are designed to provide 1A with high
efficiency. All internal circuitry is designed to
operate down to 1.4V input to output differential.
The product is specifically designed to provide wellregulated supply for low-voltage IC application such
as high-speed bus termination and low current 3.3V
logic supply, and other applications such as VGA cards.
●
Applications
High Efficiency Linear Regulators
● Post Regulators for Switching Supplies
● Adjustable Power Supply
●
Typical Application Data
Fixed Voltage Regulator
T AB
VIN>4.75V
3
OUT
IN
+
VOUT=3.3V
2
GND
C1
10μF, T an.
+
1
C2
10μF, T an. Min
Notes:
1)C1 needed if device is far from filter capacitors
2)C2 minimum value requir ed for stability
Adjustable Voltage Regulator
T AB
VIN>4.75V
3
OUT
IN
ADJ
+
C1
1
VOUT=3.45V
2
R1
133Ω,1%
10μF, T an.
VOUT =VREF×(1+R2/R1)+IADJ×R2
Notes:
1)C1 needed if device is far from filter capacitors
2)C2 minimum value requir ed for stability
LM1117L3 series
+
C2
10μF, T an. Min
R2
232Ω, 1%
CYStek Product Specification
CYStech Electronics Corp.
Spec. No. : C506L3
Issued Date : 2003.03.22
Revised Date :2015.05.13
Page No. : 2/8
Package Information
1
2
3
Pin
1
2
3
Name
ADJ/GND
OUTPUT
INPUT
SOT-223
Absolute Maximum Ratings(TA=25°C)
Symbol
PD
VIN
TOPR
TSTG
TMJ
Parameter
Power Dissipation
Input Voltage
Operating Junction Temperature Range
Storage Temperature
Maximum Junction Temperature
Maximum
850
20
-40 ~ +125
-65 ~ +150
150
Units
mW
V
℃
℃
℃
Ordering Information
Device
LM1117-ADJL3-0-T3-G
LM1117-1.5L3-0-T3-G
LM1117-1.8L3-0-T3-G
LM1117-2.5L3-0-T3-G
LM1117-3.3L3-0-T3-G
LM1117-5.0L3-0-T3-G
Output Voltage
Adjustable
1.5V
1.8V
2.5V
3.3V
5.0V
Package
SOT-223
(pb-free lead plating and
halogen-free package)
Shipping
2500 pcs/ tape & reel
Environment friendly grade : S for RoHS compliant products, G for RoHS compliant
and green compound products
Packing spec, T3 : 2500 pcs / tape & reel, 13” reel
Product rank, zero for no rank products
Product name
LM1117L3 series
CYStek Product Specification
Spec. No. : C506L3
Issued Date : 2003.03.22
Revised Date :2015.05.13
Page No. : 3/8
CYStech Electronics Corp.
Block Diagram
Electrical Characteristics @ IO=10mA,TJ=25℃, unless otherwise specified
Parameter
Reference voltage
Device
Test Conditions
Min
Typ
Max
Units
Adj version VIN-VOUT=1.5V
1.225 1.250 1.275
3.0V≤VIN≤12V
3.3V≤VIN≤12V
4.0V≤VIN≤12V
4.8V≤VIN≤12V
6.5V≤VIN≤12V
VOUT+1.5V≤VIN≤12V
VIN=3.3V, Vadj=0, 10mA≤IO≤1A
LM1117-1.5 VIN=3.0V, 0mA≤IO≤1A
LM1117-1.8 VIN=3.3V, 0mA≤IO≤1A
LM1117-2.5 VIN=4.0V, 0mA≤IO≤1A
LM1117-3.3 VIN=5.0V, 0mA≤IO≤1A
1.470
1.764
2.450
3.235
4.900
-
1.500
1.800
2.500
3.300
5.000
12
1.530
1.836
2.550
3.365
5.100
0.2
1
15
V
V
V
V
V
%
%
mV
-
15
20
18
25
mV
mV
-
26
33
mV
LM1117-5.0 VIN=8.0V, 0mA≤IO≤1A
-
40
50
mV
Dropout Voltage
(VIN-VOUT)
Current Limit
All version
IO=1A (ΔVOUT=1%VOUT)
-
1.3
1.4
V
All version
VIN-VOUT=5V
1.1
-
-
A
Minimum Load
Current
Adj version
VIN=5V
-
5
10
mA
Adjust Pin Current
Quiescent Current
Adj version VIN=12V, IO=10mA
Fixed version VIN=12V, IO=0mA
-
50
-
100
12
μA
mA
Output Voltage
Line Regulation
Load Regulation
(Note 1, 2)
LM1117L3 series
LM1117-1.5
LM1117-1.8
LM1117-2.5
LM1117-3.3
LM1117-5.0
All version
LM1117-ADJ
V
CYStek Product Specification
Spec. No. : C506L3
Issued Date : 2003.03.22
Revised Date :2015.05.13
Page No. : 4/8
CYStech Electronics Corp.
Thermal Regulation
All version
TA=25℃, 30ms pulse
Ripple Rejection
All version
f=120Hz, VIN=VOUT+3V, IO= 1A,
COUT=25μF tantalum
Temperature Stability
All version
IO= 10mA
Thermal Resistance,
Junction to Ambient(
No heat sink, no air
flow)
All version
Thermal Resistance,
Junction to Case
All version
Control Circuitry/ Power transistor
-
0.008
0.04
%/W
60
70
-
dB
-
0.5
-
%
-
117
-
℃/W
-
15
-
℃/W
Note : 1.See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation are measured at
a constant junction temperature by low duty cycle pulse testing. Load regulation is measured at the output lead 1/18” from the
package.
2. Line and load regulation are guaranteed up to the maximum power dissipation of 6.6W. Power dissipation is determined by the
difference in input and output and the output current. Guaranteed maximum power dissipation will not be available over the full
input/output range.
Recommended soldering footprint
LM1117L3 series
CYStek Product Specification
CYStech Electronics Corp.
Spec. No. : C506L3
Issued Date : 2003.03.22
Revised Date :2015.05.13
Page No. : 5/8
Typical Characteristics
LM1117L3 series
CYStek Product Specification
CYStech Electronics Corp.
Spec. No. : C506L3
Issued Date : 2003.03.22
Revised Date :2015.05.13
Page No. : 6/8
Reel Dimension
Carrier Tape Dimension
LM1117L3 series
CYStek Product Specification
CYStech Electronics Corp.
Spec. No. : C506L3
Issued Date : 2003.03.22
Revised Date :2015.05.13
Page No. : 7/8
Recommended wave soldering condition
Product
Pb-free devices
Peak Temperature
260 +0/-5 C
Soldering Time
5 +1/-1 seconds
Recommended temperature profile for IR reflow
Profile feature
Average ramp-up rate
(Tsmax to Tp)
Preheat
−Temperature Min(TS min)
−Temperature Max(TS max)
−Time(ts min to ts max)
Time maintained above:
−Temperature (TL)
− Time (tL)
Peak Temperature(TP)
Time within 5C of actual peak
temperature(tp)
Ramp down rate
Time 25 C to peak temperature
Sn-Pb eutectic Assembly
Pb-free Assembly
3C/second max.
3C/second max.
100C
150C
60-120 seconds
150C
200C
60-180 seconds
183C
60-150 seconds
240 +0/-5 C
217C
60-150 seconds
260 +0/-5 C
10-30 seconds
20-40 seconds
6C/second max.
6 minutes max.
6C/second max.
8 minutes max.
Note : All temperatures refer to topside of the package, measured on the package body surface.
LM1117L3 series
CYStek Product Specification
Spec. No. : C506L3
Issued Date : 2003.03.22
Revised Date :2015.05.13
Page No. : 8/8
CYStech Electronics Corp.
SOT-223 Dimension
A
Marking:
1117□□□
□□□□
Device Name
B
Date Code : (from left to right)
1st code : year code, 1→2011,
2→2012, …,etc.
2nd code : month code, referring to the
following table
3rd and 4th codes : production lot serial
number , 01, 02, 03, … etc
C
1
2
3
D
E
F
a1
H
Style: Pin 1.Adj/Gnd 2.Output 3.Input
I
G
3-Lead SOT-223 Plastic
Surface Mounted Package
CYStek Package Code: L3
a2
Month code :
Month
Jan
Code
A
Vout:
1.5V→-15
1.8V→-18
2.5V→-25
3.3V→-33
5.0V→-50
ADJ→blank
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec
B
C
D
E
F
G
H
J
K
L
M
*: Typical
Inches
Min.
Max.
0.1142
0.1220
0.2638
0.2874
0.1299
0.1457
0.0236
0.0315
*0.0906
0.2480
0.2638
DIM
A
B
C
D
E
F
Millimeters
Min.
Max.
2.90
3.10
6.70
7.30
3.30
3.70
0.60
0.80
*2.30
6.30
6.70
DIM
G
H
I
a1
a2
Inches
Min.
Max.
0.0551
0.0709
0.0098
0.0138
0.0008
0.0039
o
*13
0o
10 o
Millimeters
Min.
Max.
1.40
1.80
0.25
0.35
0.02
0.10
o
*13
0o
10 o
Notes: 1.Controlling dimension: millimeters.
2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material.
3.If there is any question with packing specification or packing method, please contact your local CYStek sales office.
Material:
 Lead: Pure tin plated.
 Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0.
Important Notice:
 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek.
 CYStek reserves the right to make changes to its products without notice.
 CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems.
 CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
LM1117L3 series
CYStek Product Specification