Part No. Instruction Guide Book Rev5.31 2002-1-15 HONG KONG X’TALS LIMITED Crystals Products Part Number (New Part Number System) Last Up-date : 08 Jan., 2002 20 Digits 1. Crystal Type No. 10. Serial No. 2. Frequency 9. Packaging & Marking Type 3. Tolerance at 25¡ãC 4. Load Capacitance 8. Marking Label 5. Mode 7. T.C. Tolerance 6. T.C. Range 1. CRYSTAL TYPE NO. Type 2T 3T 4T 5T Description Ø 2 x 6 mm CYLINDER TYPE Ø 3 x 8 mm CYLINDER TYPE Ø 3 x 9 mm CYLINDER TYPE Ø 3 x 10 mm CYLINDER TYPE 1U 2U 4U 5U UM1 CRYSTAL UM2 CRYSTAL UM4 CRYSTAL UM5 CRYSTAL 5C 5D 6A 6B 9D 9T HC50U HC51U HC49UT (6.5mm) HC49UT (7.9mm) HC49UT (9.5mm) HC49UT (11.2mm) 92 93 9S 94 95 9U HC49S LOW PROFILE CRYSTAL (2.15mm) HC49S LOW PROFILE CRYSTAL (2.5mm) HC49S LOW PROFILE CRYSTAL (3.5mm) HC49S LOW PROFILE CRYSTAL (4mm) HC49S LOW PROFILE CRYSTAL (5mm) HC49U CRYSTAL C1 C3 C5 CA Ceramic SMD crystal 4x2.5 Ceramic SMD crystal 6x3.5 Ceramic SMD crystal 5x7 Ceramic SMD crystal 5x3.2 P2 P5 Ceramic SMD crystal CP12A Ceramic SMD crystal CP15C E2 E3 ES F2 “Meidensha” / Epson Type [max. height 4.0mm] SMD 49S (2.1mm) + insulator “Meidensha” / Epson Type [max. height 4.5mm] SMD 49S (2.5mm) + insulator “Meidensha” / Epson Type [max. height 5.5mm] SMD 49S (3.5mm) + insulator “Meidensha” / Epson Type [max. height 4.0mm] SMD 49S (2.1mm) + insulator, casing not grounded “Meidensha” / Epson Type [max. height 4.5mm] SMD 49S (2.5mm) + insulator, casing not grounded “Meidensha” / Epson Type [max. height 5.5mm] SMD 49S (3.5mm) + insulator, casing not grounded F3 FS 1 of 4 \word\cntl_doc\HKC_PN3.doc Part No. Instruction Guide Book Rev5.31 2002-1-15 HONG KONG X’TALS LIMITED Type R2 R3 RS Description SMD-6 (2.1mm) [max. height 4.0mm] SMD-6 (2.5mm) [max. height 4.5mm] SMD-6 (3.5mm) [max. height 5.5mm] S2 S3 SS S4 S6 S7 S8 SMD-2 (2.1mm) [max. height 2.6mm] SMD-2 (2.5mm) [max. height 3.1mm] SMD-2 (3.5mm) [max. height 4.1mm] SMD-2 (4.0mm) [max. height 4.5mm] SMD-4 w/2.1mm 49S [max. height 4.0mm] SMD-4 w/2.5mm 49S [max. height 4.5mm] SMD-4 w/3.5mm 49S [max. height 5.5mm] 2. FREQUENCY First digits show frequency range, 1st digit code K Range 1KHz to 999.999KHz Format Kxxx.xxxx L 1MHz to 9.999999MHz Lx xxxxxx M 10MHZ to 99.999999MHz Mxx xxxxx Numeric 100MHz to 999.9999MHz xxx.xxxxx 3. TOLERANCE AT 25°° C and 7. T.C. TOLERANCE A=± B=± C=± D=± E=± 4. 5 ppm 10 ppm 15 ppm 20 ppm 30 ppm F = ± 50 ppm G = ± 100 ppm H = ± 25 ppm I = ± 200 ppm J = ± 45 ppm K=± 40 ppm L=± 70 ppm M = ± 2.5 ppm N = ± 150 ppm P=± 35 ppm Example 32.768KHz = K032 7680 125.1KHz = K125 1000 1.2880MHz = L1 288000 3.579545MHz = L3 579545 14.31818MHz = M14 31818 68.860MHz = M68 86000 100MHz = 100 00000 450.123MHz = 450 12300 Q = ± 60 ppm R = ± 80 ppm 1=1 ppm 2=2 ppm 3=3 ppm 4=4 ppm S= see serial no. for details LOAD CAP. CL(pF) e.g. 32 = 32 pF 10 = 10 pF 08 = 8 pF CS = SERIES XX = refer serial no. nd For CL > 10pF and show in 0.5 pF step, first digit (from 0 to 9) x10 + 2 A B C D E F G H J K 0.5 1.5 2.5 3.5 4.5 Examples 10.5 pF 12.5 pF 20.0 pF = 1A = 1C = 20 5.5 6.5 7.5 8.5 9.5 26.5 pF 32.0 pF 39.5 pF = 2G = 32 = 3K nd For CL < 10pF and show in 0.1 pF step, first digit (see below table) + 2 A B C D E Examples 7.5 pF 2.6 pF F G H J 1 2 3 4 5 = G5 = B6 digit 3.3 pF 4.8 pF digit (tenth digits) (from 0 to 9) 6 7 8 9 = C3 = D8 2 of 4 \word\cntl_doc\HKC_PN3.doc Part No. Instruction Guide Book Rev5.31 2002-1-15 HONG KONG X’TALS LIMITED 5. MODE rd 3=3 OVERTONE th 5=5 OVERTONE th 7=7 OVERTONE th 9=9 OVERTONE th 2 = 11 OVERTONE th 4 = 13 OVERTONE B = BT cut crystal F = Fundamental 6. T.C. RANGE Sort by Code Sort by Range 1 = -20°C TO 60 °C 2 = 0°C TO 70 °C 3 = -20°C TO 70 °C 4 = -10°C TO 70 °C 5 = -10°C TO 60 °C 6 = 0°C TO 50 °C 7 = -25°C TO 70 °C 8 = 0°C TO 80 °C 9 = -20°C TO 85 °C 7. G = -55°C H = -55°C M = -55°C J = -40°C A = -40°C C = -40°C K = -40°C L = -40°C F = -30°C 7 = -25°C B = -20°C 1 = -20°C TO 85°C TO 105°C TO 125°C TO 40°C TO 85°C TO 90°C TO 105°C TO 125°C TO 70°C TO 70°C TO 50°C TO 60°C 3 = -20 °C 9 = -20 °C 5 = -10 °C 4 = -10 °C D = 0 °C 6 = 0 °C E = 0 °C 2 = 0 °C 8 = 0 °C TO TO TO TO TO TO TO TO TO 70 °C 85 °C 60 °C 70 °C 40 °C 50 °C 60 °C 70 °C 80 °C S = see serial no. for details T.C. TOLERANCE see 8. A = -40°C TO 85°C B = -20°C TO 50°C C = -40°C TO 90°C D = 0°C TO 40°C E = 0°C TO 60°C F = -30°C TO 70°C G = -55°C TO 85°C H = -55°C TO 105°C J = -40°C TO 40°C K = -40°C TO 105°C L = -40°C TO 125°C M = -55°C TO 125°C S = see serial no. for details item 3 MARKING LABEL “X“ = no marking USE A CODE TO REPRESENT A CUSTOMER NAME (MARKING) SEE CODING TABLE (in Sales Department) e.g. H = HKC Z = MARK FREQUENCY OR FIGURE (no Company Name or Logo) 9. PACKAGIND & MARKING TYPE bulk pack without marking standard bulk pack Ammo Pack 24mm Blister Tape with 8mm pitch 24mm Blister Tape with 12mm pitch Paper Tape & Reel Paper Tape & Reel (crimp lead) special requirement (refer serial number for details) paper tray Tube 16mm Blister Tape with 8mm pitch With Laser Marking B M E F G D S U H K With Ink Marking 0 A 8 W R C S T J 6 3 of 4 \word\cntl_doc\HKC_PN3.doc Part No. Instruction Guide Book Rev5.31 2002-1-15 HONG KONG X’TALS LIMITED 10. SERIAL NUMBER Industrial Grade Standard (no special specification require) (Industrial Grade) Each follow no. represent difference combination and is refer to this specific crystal only 00 01-99 Example 01 C0 6.0pF max SPRR > 10*Rr DLD 0.3-300 µW, DR<10 ohm, DF < ±5ppm Drive level = 10 µW Lead length = 9mm L2 L4 L6 L9 2.8mm lead 4.0mm lead Long lead length=16mm Long lead length=21mm C0 C1 C2 C3 C4 C5 Ground lead at top rd 3 lead at base centre (grounded) rd 3 lead at base centre (not grounded) rd 3 lead at base centre (grounded) + Insulator (E-type) rd 3 lead at base centre (grounded) + sleeve rd 3 lead at base centre (grounded) + M2 Insulator (Mylar) G1 G2 G3 G4 Gull wing (49U gull wing I, DWG:12032597) Gull wing (49U gull wing II, DWG:12032945) Gull wing (UM1 gull wing, DWG:12033675) Gull wing (UM1 gull wing II, DWG:12033687) M1 M2 M3 Insulator (Mylar HC45INS, DWG:12032917) Insulator (Mylar HC18INS, DWG:12033491) Insulator (E-type) S0 SL Spring mount Sleeve AX A0 Automotive Grade, X=1-9 is follow no. Standard Automotive application NX Commercial Grade, X=1-9 is follow no. ******************************************************* EXAMPLE : HKC ink marking, bulk pack, 14.31818MHz, CL=18.5pF, 20 PPM, TC = -20 °C TO 60 °C 50PPM, FUND. HC49U PART No. = 9UM1431818D1JF1FH000 EXAMPLE : Laser marking, mark frequency only, 120.0592MHz, CL=series, paper tape & reel, 50 PPM, TC =-40 °C TO 85 °C 50PPM, 3 rd overtone UM1 PART No. = 1U12005920FCS3AFZG00 Part number Characters list : 0,1,2,3,4,5,6,7,8,9 ABCDEFGHJKLMNPQRSTUVWXYZ Don’t use small capital letter for Part Numbering 4 of 4 \word\cntl_doc\HKC_PN3.doc