SHEET 1 OF 1 _ 12.90 [.508 in] n17.50 [.689 in] 2 1 + CIRCUIT: SPST OFF-ON B LATCHING n13.60 [.535 in] n12.00 [.472 in] C 7.22 [.284 in] BUTTON COLOR BLACK PANEL CUT-OUT T082005 LED SPECIFICATIONS LED PARAMETER UNITS RED LED FORWARD CURRENT mA 20 FORWARD VOLTAGE V 2.1 TYP, 2.6 MAX. mcd 43 MIN- 100TYP LUMINOUS INTENSITY M12 x 0.75 NOTE: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. CIRCUIT: SPST OFF-ON 5. CONTACT MATERIAL: Gold OVER SILVER 6. RATING: 100mA @ 24 VDC 7. ELECTRIC LIFE: 200,000 CYCLES AT FULL LOAD 8. CONTACT RESISTANCE: 100 milli-OHM max. (INITIAL) 9. INSULATION RESISTANCE: 1,000 MEGA-OHM min. @ 500VDC. 10. DIELECTRIC STRENGTH: 1,000 VAC rms. 11. OPERATING FORCE: 560 gf +/- 150 gf 12. OPERATING TEMPERATURE: -30°C TO +85°C. 13. CONTACT BOUNCE: 10ms MAX. 14. TRAVEL: 2.5±0.25mm 15. PANEL THICKNESS RANGE: 1.5 - 4.0 mm. 16. DENOTES CRITICAL PARAMETER. 17. 2002/95/EC (ROHS) COMPLIANT 18. MAX. MOUNTING TORQUE: 1.5Nm APPLIED TO THE HEX NUT 19. MOUNTING HARDWARE INCLUDED: - T081101 LOCK WASHER (QTY 1) - T081102 HEX NUT (QTY 1) - T081103 O-RING (QTY 1) B D 20. SEAL RATING: IP67 AT THE FRONT PANEL B 16.80 [.661 in] 1.80 [.071 in] 1 B 21.00 [.827 in] .50 [.020 in] 5.25 [.207 in] 9/29/14 EBP C 19895 DIMSION CHANGES WAS 7.0 & 3.4 5/3/11 BGL B 19358 MISC. DRAWING UPDATES 10/26/10 BMA NEW RELEASE 6/7/10 RC DATE BY PCR NO DESCRIPTION THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED C o CHANGE SEAL RATING FROM IP65 TO IP67 REV 1.20 [.047 in] 3.30 [.130 in] 2.80 [.110 in] 21597 19126 22.00 B [.866 in] 5.08 [.200 in] CATHODE (-) D A 2 TITLE SCALE RP8200B2M1CEBLKBLKRED DATE 2:1 DR 6/7/2010 RC REV DWG ST082005 D