SHEET 1 OF 1 5.00 [.197 in] 2.50 [.098 in] 5.00 [.197 in] 7.50 [.295 in] 2.50 [.098 in] L2 3 2 1 6 5 4 n7.50 [.295 in] L1 8.70 [.343 in] n.70 (2) [.028 in] 10.00 [.394 in] B n.90 (6) [.035 in] PCB LAYOUT L1 1 2 + 3 D RED PUSH 4 5 6 CIRCUIT DIAGRAM DOT INDICATES LED CATHODE L2 - 3 NOTES: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. CONTACT RATING: CURRENT: 100mA VOLTAGE: 30 VDC 5. OPERATING LIFE: 50,000 MAKE-AND-BREAK CYCLES 6. INSULATION RESISTANCE: 500VDC, 100M OHM. MIN. 7. OPERATING FORCE: 250gf ± 100 GRAMS 8. OPERATING TEMP.: -20°C to 70°C 9. TRAVEL: MOMENTARY 1.50 ± 0.3mm FULL TRAVEL 10. CONTACT RESISTANCE: 50 m OHM. MAX. 11. DENOTES CRITICAL PARAMETER. 12. 2002/95/EC (ROHS) COMPLIANT 13. LED COLOR: RED 7.30 [.287 in] .60 [.024 in] .25 [.010 in] 2.50 [.098 in] 10.00 [.394 in] .50 [.020 in] 5 4 L1 L2 EBP C 19601 DRAWING UPDATE 1/19/11 BGL B 18414 PCB LAYOUT SECTION FIXED 2/19/09 BLR New Release 11/13/08 rc DATE BY DESCRIPTION L1 C 1/30/13 PCR NO 4 6 3.50 [.138 in] 6 REMOVE "WHITE" FROM LED DOT NOTE REV L2 6 .30 [.012 in] 7.50 [.295 in] 20993 18316 L2 5.00 [.197 in] D A 10.20 [.401 in] 12.40 [.488 in] 19.70 [.776 in] THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED LED SPECS FORWARD CURRENT FORWARD VOLTAGE @20mA LUMINOUS INTENSITY @ 10mA TITLE SCALE RED 20 1.9-2.5 200 UNITS mA V MCD 3 2 1 LP4OA1PBCTR DATE 4:1 DR 2/19/2009 rc REV DWG B240001 D