SHEET 1 OF 1 .71 [.028 in] 1.02 [.040 in] SWITCH FUNCTION POS. 1 POS. 2 POS. 3 ON NONE ON 2-3, 5-6, 8-9, 11-12 21.59 [.850 in] KEYWAY 2-1, 5-4, 8-7, 11-10 OPEN 12.70 [.500 in] POS. 1 POS. 2 POS. 3 2.92 n [.115 in] 25~ 5 2 1 3 4 8 6 7 11 9 10 10.41 [.410 in] 1/4 - 40 UNS 12 CIRCUI: 4PDT NOTE: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. PLATING MATERIAL: SILVER 5. RATING: 5A @ 120VAC OR 28VDC 2A @ 250VAC W/ RESISTVE LOADS 6. ELECTRIC LIFE: 50,000 MAKE-AND-BREAK CYCLES AT FULL LOAD. 7. INSULATION RESISTANCE: 1,000 MEGA-OHM MIN. 8. DIELECTRIC STRENGTH: 1,000 V RMS @SEA LEVEL. 9. OPERATING TEMP.: -30°C to 85°C 10. DENOTES CRITICAL PARAMETER. 11. HARDWARE TO BE SHIPPED BULK T100000 - HEXNUT - QTY 2 T100011 - LOCKWASHER - QTY 1 T100015 - LOCKRING - QTY 1 8.89 [.350 in] E-SWITCH LOGO ON OPPOSITE SIDE 10.54 [.415 in] 1 3 3 EPOXY SEAL .76 [.030 in] 3.96 [.156 in] 6 9 12 1.98X1.19 SLOT [.078 X .047] TYP 2.03 [.080 in] 4.83 [.190 in] 4.70 [.185 in]TYP. B 17920 CHANGE LOCATION OF E-S LOGO 1/14/08 BLR A 17489 RELEASED FOR PRODUCTION 7/20/07 BF REV PCR NO DATE BY DESCRIPTION 2 THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED TITLE SCALE 1004P1T1B1M1QEH 2:1 DATE 1/14/2008 DR BF DWG ST141003 REV B