SHEET 1 OF 1 3.81 [.150 in] 5.08 [.200 in] 4.70 [.185 in] 12.70 [.500 in] 2.69 [.106 in] 12.70 [.500 in] 3.17 [.125 in] 11.43 [.450 in] n1.85 [.073 in] TYP. PC MOUNTING 1.02 [.040 in] .71 [.028 in] KEYWAY SWITCH FUNCTION POS. 1 POS. 2 POS.1 POS. 3 POS. 3 2.67 [.105 in] 25~ ON NONE ON 2-3, 5-6 N/A 2-1, 5-4 2 1 6.46 [.254 in] ISOMETRIC .51 7.36 [.020 in] [.290 in] 5 3 4 6 E-SWITCH MARKING ON OPPOSITE SIDE 12.70 [.500 in] 1.27 [.050 in] CIRCUIT: DPDT NOTE: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4 4. PLATING MATERIAL: SILVER 5. RATING: 5 AMPS W/RESITIVE LOAD @ 120VAC OR 28VDC 2 AMPS W/RESITIVE LOAD @ 250VAC 6. ELECTRIC LIFE: 40,000 make-and-break cycles 4.70 at full load. [.185 in] TYP. 7. INSULATION RESISTANCE: 1,000 Mega-ohm min. 8. DIELECTRIC STRENGTH: 1,000 V RMS @sea level. 9. OPERATING TEMP.: -30°C to 85°C 10. DENOTES CRITICAL PARAMETER. 3 EPOXY SEAL 5 15989 UPDATED ACTUATOR POS. 4/26/06 CT F 15233 CHANGES NOTED WITH 9/1/05 PH E 15200 CHANGES NOTED WITH 8/25/05 PH D 14611 REVISED AND REDRAWN 1/7/05 AR REV PCR NO DATE BY DESCRIPTION 3.81 [.150 in] .76 [.030 in] TYP. G THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED 6 6 TITLE SCALE 100DP1T2B4M6QE 2:1 DATE DR 5/21/1998 AR REV DWG T121043 G