SHEET 1 OF 1 n16.00 `.10 [.630 `.004 in] C LASER ETCHED POWER SYMBOL n18.00 [.709 in] 7.40 `.15 [.291 `.006 in] RING ILLUMINATION n11.90 [.469 in] RECOMMENDED PANEL CUTOUT MAX. PANEL THICKNESS 10.0 [.315 in] n9.20 [.362 in] SWITCH FUNCTION POS. 1 1 2 - + n6.00 [.236 in] FLAT ACTUATOR MACHINE FINISH STAINLESS STEEL (304 GRADE) POS. 2 OFF (ON) OPEN 1-2 BODY FINISH MACHINE FINISH STAINLESS STEEL (304 GRADE) 1.50 [.059 in] CIRCUIT: SPST C 7.30 `.15 [.287 `.006 in] NOTE 15 HARDWARE SUPPLIED (ON) = MOMENTARY NOTE: 16.50 `.50 1. ALL DIMENSIONS IN MM [INCH] [.650 `.020 in] 15.50 2. GENERAL TOLERANCE: X.X=±0.4 [.610 in] X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. CONTACT MATERIAL: SILVER PLATED COPPER 5. RATING: 2A 48VDC 6. ELECTRIC LIFE: 200,000 MAKE-AND-BREAK CYCLES AT FULL LOAD. 7. INSULATION RESISTANCE: 1,000 MΩ MIN. 8. DIELECTRIC STRENGTH: 2,000 VAC MIN. FOR 1 MINUTE 9. CONTACT RESISTANCE: 50mΩ MAX. @ 1A 12VDC 10. OPERATING TEMP.: -20°C to 55°C 11. TRAVEL: 1.8mm B 12. DENOTES CRITICAL PARAMETER. 9.80 13. ILLLUMINATION VOLTAGE: BASE VOLTAGE, 2.8V 20mA [.386 in] 14. ILLUMINATION COLOR: BLUE (FORWARD), BLUE (REVERSE) 15. HARDWARE SUPPLIED: O-RING AND HEXNUT (NOT SHOWN) C 21174 ADD FLAT 7/15/13 EBP B 20977 REMOVE EXTERNAL RESISTOR, 2.8 WAS 3 1/18/13 EBP A 20244 RELEASE FOR PRODUCTION 10/31/11 BGL REV PCR NO DATE BY DESCRIPTION THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED 20.00 `.50 [.787 `.020 in] M16x1.0 (-) 2 1 (-) 1 (+) 2.00 [.079 in] .50 [.020 in] TITLE SCALE 8.40 [.331 in] PV6F240SS-341-M01 2:1 DATE 10/31/2011 DR BGL DWG 52-PV6F240SS341M01 REV C