SHEET 1 OF 1 19.00 [.748 in] SWITCH FUNCTION PANEL CUTOUT MAX. PANEL THICKNESS 11.0mm [.433] POS. 1 POS. 2 ON (ON) 1-3 1-2 22.00 [.866 in] RING ILLUMINATION 13.40 [.528 in] (ON) = MOMENTARY ACTUATOR FINISH STAINLESS STEEL FLAT ACTUATOR 1 3 1 2 2.00 [.079 in] BODY FINISH STAINLESS STEEL (-) (+) SPDT CONTACT CONFIGURATION NOTE 14 HARDWARE SUPPLIED M19x1.0 28.50 .50 [1.122 .020 in] 38.00 .50 [1.496 .020 in] NOTE: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X= 0.4 X.XX= 0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. CONTACT MATERIAL: GOLD 5. RATING: 2A 48VDC 6. ELECTRIC LIFE: 50,000 MAKE-AND-BREAK CYCLES AT FULL LOAD. 7. INSULATION RESISTANCE: 1,000 M MIN. 8. DIELECTRIC STRENGTH: 2,000 VAC MIN. FOR 1 MINUTE 9. CONTACT RESISTANCE: 50m MAX. @ 1A 12VDC 10. OPERATING TEMP.: -20 C to 55 C 11. DENOTES CRITICAL PARAMETER. 12. LAMP VOLTAGE: 20mA 2.8V 13. INGRESS PROTECTION: IP65 14. HARDWARE SUPPLIED: O-RING AND HEXNUT 15. ILLUMINATION COLOR: BLUE 16. TRAVEL: 2.8mm A 21813 REV PCR NO RELEASE FOR PRODUCTION DESCRIPTION 1 (-) 2.50 [.098 in] MW DATE BY THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED TITLE SCALE 3 (+) .50 [.020 in] 12.00 [.472 in] 03/25/15 1 (+) 5.00 [.197 in] 2.80 [.110 in] 5.00 [.197 in] PV4F2B0SSG-341 2/1 DATE 3/25/2015 DR MW DWG 52-PV4F2B0SSG341 REV A