SHEET 1 OF 1 n19.00 [.748 in] SWITCH FUNCTION PANEL CUTOUT MAX. PANEL THICKNESS 11.0mm [.433] 1 2 4 3 POS. 1 POS. 2 ON (ON) 1-2 3-4 (ON) = MOMENTARY n22.00 [.866 in] DOT ILLUMINATION n15.50 [.610 in] n9.00 [.354 in] ACTUATOR FINISH MACHINE FINISH STAINLESS STEEL FLAT ACTUATOR _ 2.00 [.079 in] BODY FINISH MACHINE FINISH STAINLESS STEEL + RED SPDT CONTACT CONFIGURATION NOTE 15 HARDWARE SUPPLIED 24.00 `.50 [.945 `.020 in] M19x1.0 32.70 `.50 [1.287 `.020 in] NOTE: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. CONTACT MATERIAL: SILVER 5. RATING: 2A 48VDC 6. ELECTRIC LIFE: 50,000 MAKE-AND-BREAK CYCLES AT FULL LOAD. 7. INSULATION RESISTANCE: 1,000 MΩ MIN. 8. DIELECTRIC STRENGTH: 2,000 VAC MIN. FOR 1 MINUTE 9. CONTACT RESISTANCE: 50mΩ MAX. @ 1A 12VDC 10. OPERATING TEMP.: -20°C to 55°C 11. TRAVEL: 2.8mm 12. DENOTES CRITICAL PARAMETER. 13. LAMP VOLTAGE: 1.8V 14. INGRESS PROTECTION: IP65 15. HARDWARE SUPPLIED: O-RING AND HEXNUT 16. ILLUMINATION COLOR: RED 17. 2002/95/EC (ROHS) COMPLIANT. A 20912 REV PCR NO RELEASE FOR PRODUCTION DESCRIPTION 4 + 2.80 [.110 in] 1 (+) 1 3 .50 [.020 in] 7.60 [.299 in] 3.85 [.152 in] 9.90 [.390 in] 7.70 [.303 in] 12/6/12 EBP DATE BY THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED (-) TITLE SCALE PV4F2Y0SS-211 DATE 12/6/2012 DR EBP DWG 52-PV4F2Y0SS211 REV A