HNA 1 0 A N o n - i s o l a t e d DC/DC Converters series Non-Isolated Converter 3.3-5.5VDC Input Range (4.5-5.5VDC, 3.3V O/P) 0.9VDC to 3.3VDC Outputs On/Off Control Function High Efficiency to 95% (3.3V O/P) Unit measures 1.3”L x 0.53”W x 0.32”H Small SMT Package Style Model Number Input Range Output Voltage Output Current Efficiency HNA3R3100 HNA2R5100 HNA2R0100 HNA1R8100 HNA1R5100 HNA1R2100 HNA1R0100 HNA0R9100 4.5-5.5VDC 3.0-5.5VDC 3.0-5.5VDC 3.0-5.5VDC 3.0-5.5VDC 3.0-5.5VDC 3.0-5.5VDC 3.0-5.4VDC 3.3VDC 2.5VDC 2.0VDC 1.8VDC 1.5VDC 1.2VDC 1.0VDC 0.9VDC 10A 10A 10A 10A 10A 10A 10A 10A 95% 92% 90% 90% 88% 86% 84% 83% WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 HNA 1 0 A N o n - i s o l a t e d DC/DC Converters INPUT SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Input Voltage, Nominal 3.0 - 5.5VDC (4.5-5.5VDC, 3.3V O/P) Recommended I/P Fuse 20A Input Voltage Ranges 3.0 - 3.6VDC 4.5-5.5 VDC Maximum Input Current 6A (Note 4) On/Off Control (Ref to -Input pin) Open or 0V<VR<1V=ON 3.3Vin 2.4V<Vr<6V=OFF 5Vin 3.2V<Vr<6V Input Reflected Ripple 625mA rms Oper. Temp. Range (See Fig 4) Oper. Humidity Range Cooling Storage Temperature Range Recommended Storage Thermal Shock Over Temp Protection MTBF Shock/Vibration Material OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Preset Accuracy +/- 2.7% max. Rise Time Please see page 3 Min Load None Load Regulation (0% - FL) +/- 0.5% Line Regulation +/- 0.5% Temperature Coefficient +/-0.02%/DegC Ripple/Noise (Pk-Pk, typ), 20Mhz BW 100mV Overvoltage Protection Clamp, 130-150% * Short Circuit Protection Continuous, self-recovering Transient Response Recovery Time (See Fig 1) Load step change 100%-0% or 0%-100% 1A/10uS Nominal Input Peak Deviation 80mV Settling Time 200uSec Max External Load Capacitance 10,000uF O/P Current Limit (Note 1) Latching Voltage Adjust (See Fig 2) +/-10% series -40 to +85 DegC(FL) 5~85%RH No Condensation Forced Air, See Derate -55 to +125 DegC * Hermetically Sealed in a 5 to 30°C, 40 to 60% RH Environment. (1 year warranty from date of seal) Mil Std 810D +125DegC 1,000,000 Hrs Mil Std 217, 25C To MIL-STD 810C UL: 94 V-0 EMC SPECIFICATIONS Conducted Emissions Radiated Emissions Conducted Immunity EN55022, Level A EN55022, Level A EN61000-4-6, Criteria 2 NOTES 1. Starting the Product into a Short Circuit Mode will damage the device. 2. In order to meet all specifications for the 3.3Vin models, an external capacitor is needed on the input. The capacitor is SANYO OS-CON,SA-Series, 68uF/10V. 3. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40DegC. (Ground fixed and controlled environment) 4. Maximum value at nominal input voltage and full load. 5. Minimum value at nominal input voltage and full load. All specifications are typical at nominal input, full load, and 25DegC unless otherwise noted GENERAL SPECIFICATIONS * These are stress ratings. Exposure of the devices to any of these conditions Input-Output Isolation In/Out Capacitance Efficiency (Note 5) Switching Frequency Dimensions (See Fig 3.) Weight MTBF (Note 3) None 1000 pF See Selection Chart 500Khz, typ. 2.5” x 0.55” x 0.26” (63.5 x 14.0 x 6.6mm) 0.3oz (8.5g) 2.064x10-6th Hrs WWW.ASTRODYNE.COM may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 1 0 A N o n - i s o l a t e d DC/DC Converters HNA series MECHANICAL SPECIFICATIONS WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 HNA 1 0 A N o n - i s o l a t e d DC/DC Converters series Output Rise Time Vo ± 1% from Input Voltage Application WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458