ASL60 60W U l t r a m i n i a ture Open Fram e S w it c hi n g Po we r Su p p lie s series Up to 60W Output Power Universal 90-264VAC Input Single and Dual Outputs from 5VDC to 48VDC High Efficiency up to 86% 3000VAC Isolation 1U Compatible Height 2”W x 4”L x 1.244”H Model Number Output Voltage Max. O/P Amps Min. O/P Amps Efficiency @ 230VAC R&N P-P SINGLE OUTPUT ASL60-5(A)* ASL60-9(A)* ASL60-12(A)* ASL60-15(A)* ASL60-24(A)* ASL60-36(A)* ASL60-48(A)* 5VDC 9VDC 12VDC 15VDC 24VDC 36VDC 48VDC 9 5 5 4 2.5 1.66 1.25 0 0 0 0 0 0 0 80% 82% 84% 84% 86% 85% 86% 300mV 250mV 250mV 250mV 250mV 250mV 250mV DUAL OUTPUT ASL60D-1 ASL60D-2 ASL60D-3 ASL60D-5 (V1/V2) 5/12VDC 5/15VDC 5/24VDC 5/48VDC (I1/I2) 5/3 1/0.60 81% 100/120mV 5/2.4 1/0.48 82% 100/150mV 5/1.5 1/0.30 82% 100/240mV 5/0.73 1/0.15 82% 100/400mV *Note: The Single Outputs can be ordered with Molex 09-65-20xx, 5273 Series I/O connectors.. Simply add the suffix “A” to the end of the Model Number. For example, ASL60-5A WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASL60 60W U l t r a m i n i a ture Open Fram e S w it c hi n g Po we r Su p p lie s GENERAL SPECIFICATIONS INPUT SPECIFICATIONS Input Voltage Range Frequency Range Inrush Current, typ: Leakage Current series 90-264 VAC (115-240V Nom.) 47-63 Hz 30A @ 115VAC Input * 60A @ 230VAC Input * <3.5mA @ 240VAC, 50Hz OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Load Regulation (20%-FL) Single O/P: ± 1% Dual O/P (V1/V2): ± 3/5% max Line Regulation (LL-HL) Single O/P: ± 1% max Dual O/P (V1/V2): ± 1/2% max Cross Regulation (Dual Outputs) (100-20% L w. other O/P at 60%) ± 5/7% max Preset Accuracy Single Output: 1% max. Dual Outputs (V1/V2): +7/-9% max. DC Voltage Adjust (typ) ± 6% of FS (Primary) Temperature Coefficient ± 0.05%/°C Ripple/Noise, 20Mhz BW See Selection Chart Measured by paralleling 47uF/EC and 0.1uF ceramic capacitors on the output at a 20MHz band-width Over Voltage Protection Latching, 130% typ., re-power Over Power Protection 140% +20/-10% nom. I/P Range * Short Circuit Protection Continuous, self-recovering * Hold Up Time (115V / 60Hz) 10 mS, typ. Isolation Efficiency Switching Frequency Safety UL/cUL: UL-EU: CE: CB: Input-Output: 3000VAC Input-GND: 1500VAC Output-GND: 500VAC See Selection Chart 65Khz, (fixed, typical) UL60950-1 2nd ed./ C22.2 60950-1 2nd ed. EN60950-1 2nd ed. EN60601-1-2 IEC60950-1 2nd ed. PHYSICAL SPECIFICATIONS Size Construction Weight 2” x 4” x 1.244” 50.8 x 101.6 x 31.6mm Open Frame 5.61oz (159g) typ. ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Storage Temperature Relative Humidity EMI MTBF -10 to +70°C(FL) , See Derate, Pg 5 -40 to +85°C * 0 to + 95%, non-cond * EN55011 Class B 185,000 Hrs Mil Std 217, 25°C All specifications are typical at nominal input, full load, and 25°C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASL60 60W U l t r a m i n i a ture Open Fram e S w it c hi n g Po we r Su p p lie s series MECHANICAL DIMENSIONS WITH JST CONNECTORS - STANDARD All 4 corner holes need to be bonded accordingly to the end product PE (Protective Earth) path. 4.00in 101.6mm 3.70in 94mm .15in 3.8mm 2.00in 50.8mm .125in 4_ 3.17mm 3 4 5 6 1.70in 43.2mm ACL 1 ACN 2 +V2out GND GND +V1out .15in 3.8mm 1.17in 29.6mm max C .08in 2mm Length 、Width tolerance : DRAWING NO. Pin # REV C Input connector : JST/VH series or equivalent Output connector : JST/VH series or equivalent 0.1mm (0.004in) ASM60W_C Single Outputs 1 AC Line 2 AC Neutral 3 + Output 4GND 5GND 6 + Output .063in 1.6mm Dual Outputs DESCRIPTION Height changes AC Line AC Neutral + Output 2 GND GND + Output 1 WWW.ASTRODYNETDI.COM SHEET METAL TOLERANCE (UNLESS OTHERWISE SPECIFIED) UNIT SIZE mm A4 MATERIAL PART NO. Connectors and Mating Connectors 1:1 SCALE ANGULAR PIERCINGBENDING DIMENSION MODEL NO. Input Connector: JST B3P-VH or Molex 41791 Series (3 Position) 2012/05/24 SHEET OF ±0.1 ±0.15 X<8 ±0.3° Input8<X<25 Mating Connector: JST VHR-3N or Molex 41695 Series (3 Position) 2D TITLE ±0.5° Projection ±0.1 ±0.2 Output Connector:±0.15 JST B4P-VH or Molex 41791 DRAWN Series (4 Position) ±0.5° ±0.25 Erica 25<X<100 Output Mating Connector: JST VHR-4N±1° or MolexCHECKED 41695 Series (4 Position) ±0.2 ±0.3 100<X<300 DATE 300<X<800 ±0.3 ±0.5 ±1.5° APPROVED Use with JST # SVH-21T-P1.1 or Molex 2478 Series Crimp Terminals ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASL60 60W U l t r a m i n i a ture Open Fram e S w it c hi n g Po we r Su p p lie s series MECHANICAL DIMENSIONS WITH MOLEX CONNECTORS (“A” VERSIONS SINGLE OUTPUTS ONLY) All 4 corner holes need to be bonded accordingly to the end product PE (Protective Earth) path. 4.00in 101.6mm 3.70in 94mm .15in 3.8mm 2.00in 1.70in 50.8mm 43.2mm .125in 4_ 3.17mm 3 4 5 6 ACL 1 ACN 2 +Vout +Vout GND GND .15in 3.8mm 1.17in 29.6mm max C .08in 2mm Length 、Width tolerance : DRAWING NO. REV C Input connector : Molex 5273 series or equivalent Output connector : Molex 5273 series or equivalent 0.1mm (0.004in) ASM60-A_C Pin # .06in 1.6mm Single Outputs DESCRIPTION Height changes 1 AC Line 2 AC Neutral 3 + Output 4 + Output 5 GND 6GND WWW.ASTRODYNETDI.COM SHEET METAL TOLERANCE (UNLESS OTHERWISE SPECIFIED) UNIT SIZE mm A4 MATERIAL PART NO. Connectors and Mating Connectors 1:1 SCALE ANGULAR PIERCINGBENDING DIMENSION 2012/05/25Input MODEL NO. Connector: JST B3P-VH or Molex 5273 Series (3 Position) SHEET OF ±0.1 ±0.15 X<8 ±0.3° Input8<X<25 Mating Connector: JST VHR-3N or Molex 5239 Series (3 Position) 2D TITLE ±0.5° Projection ±0.1 ±0.2 Output Connector:±0.15 JST B4P-VH or Molex 5273 DRAWN Series (4 Position) ±0.5° Erica ±0.25 25<X<100 Output Mating Connector: JST VHR-4N or Molex 5239 Series (4 Position) ±0.2 ±1° CHECKED ±0.3 100<X<300 DATE 300<X<800 ±0.3 ±0.5 ±1.5° APPROVED Use with JST # SVH-21T-P1.1 or Molex 2478 Series Crimp Terminals ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 60W U l t r a m i n i a ture Open Fram e S w it c hi n g Po we r Su p p lie s ASL60 series DERATE CURVES AMBIENT TEMPERATURE INPUT VAC WWW.ASTRODYNETDI.COM 4614 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458