150W Single Output LED Driver DR150 150W S i n g l e Ou t put LE D D ri v er w it h P FC ■ Features series Constant Voltage and Current Output ● Constant voltage and current output Universal AC Input of 100~305VAC ● Universal AC input 100~305VAC Built-in Active PFC function ● Built-in active PFC function Protections: Short Circuit/Over Voltage/Over Load ● Output protections: Short circuit/Over voltage/Over load Cooling by Free Air Convection ● Fixed derating-cutoff type temperature protection ● Cooling by free air convection 3 in 1 Dimming Function (optional) ● Digital, analog or DALI control dimming functionAdjustable Output Voltage and Current (optional) ● Suitable for inside of the outdoor LED luminariesSuitable for LED Lighting and LED Electronic Display ● IP65 with Vo/Io adjusting screws, IP67 without Vo/Io adjusting screws Applications ● Compliance to worldwide safety regulations for IP65 lighting ~ IP67 Design for Indoor or Outdoor Installations ● Suitable for dry/damp/wet locations Suitable for Dry / Damp / Wet Locations 5 Year Warranty IP67 IP65/67 E346360 RoHS ■ General functions Output Power 150W Input Frequency 50/60Hz Input Voltage Range 100~305Vac Operating Temperature -40℃~+60℃ Storage Temperature -45℃~+85℃ Safety & EMC UL8750, IEC61347, EN55015 Turn-on Delay Time 3.0S max. Inrush Current 65A at 230Vac, Cold start Waterproof IP65/IP67 Over Temp Protection Fixed derating-cutoff type temperature protection All specifications are typical at nominal input, full load, and 25°C unless otherwise noted Rev.3 MAY.2014 WWW.ASTRODYNETDI.COM www.tonlier.com 1 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 DR150 Series ® 150W Single Output D LED RDriver 1 5 0 series ■ Detailed 150W S i n g l e OuSpecification t put LE D D ri v er w it h P FC TABLE 1： Model DC Voltage Constant Current Operation Voltage note.5 Rated DC Current Current Range Output Input Output Protection Environmental Safety＆EMC Others DR150-215S070X-YY DR150-143S105X-YY DR150-108S140X-YY DR150-072S210X-YY DR150-054S280X-YY 215Vdc 143Vdc 108Vdc 72Vdc 54Vdc 129 ~215Vdc 86 ~143Vdc 64 ~108Vdc 43~72Vdc 32 ~54Vdc 700 mA 1050 mA 1400 mA 2100 mA 2800 mA 0~700mA 0~1050mA 0~1400mA 0~2100mA 0~2800mA Dimming Current Range Ripple and Noise 10~100% rated output current (≥50% rated output voltage) 10%Vo 10%Vo 10%Vo 10%Vo 10%Vo Voltage ADJ. Range note.3 194~226Vdc 129~150Vdc 97~113Vdc 65~76Vdc 49~57Vdc Current ADJ. Range note.3 420~700mA 630~1050mA 840~1400mA 1260~2100mA 1680~2800mA Voltage Tolerance ±5% ±5% ±5% ±5% ±5% Voltage Line Regulation ±1% ±1% ±1% ±1% ±1% Voltage Load Regulation ±5% ±5% ±5% ±5% ±5% Efficiency 92% 92% 91% 91% 91% 0.96/230Vac 0.96/230Vac 0.96/230Vac 0.96/230Vac 0.96/230Vac Power Factor AC Current 1.8A/100Vac, 0.9A/230Vac Leakage Current <0.75mA/230Vac; <0.5mA/120Vac Over Current Constant current limiting Short Circuit Non-dimmer type: recover automatically at hiccup; Dimmer type: Short-circuit power ≤10W. Over Voltage Shut down at 140% Vo and latch off o/p voltage, re-power on to recover Operating Humidity 20~95% RH, non-condensing Storage Humidity 10~95% RH Temperature Coefficient ±0.03%/℃ (0~50℃) Vibration 10~300Hz, 1G, Period for 60min, each along X、Y、Z axes. Withstand Voltage I/P-OP: 3.75KVac; IP-FG: 1.56KVac/2.00KVac (remove discharge tube); O/P-FG: 2.00KVac Isolation Resistance IP-OP, IP-FG, O/P-FG: 100M Ohms/500Vdc/25℃/70% RH EMC Interference Compliance to EN55015, EN55022 (CISPR22) Class B EMC Emission Compliance to EN61000-3-2 Class C (≥50%load); EN61000-3-3 EMC Immunity Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, EN61547, EN55024 Authentication UL/TUV/CE/FCC/RoHS/CQC/REACH MTBF 319k Hrs at full load and 30℃ ambient conditions per MIL-HDBK-217F Input Over-voltage Can survive input over-voltage stress of 320Vac for 48 hours Dimensions (mm) 226×68×40 Max. Case Temp. Tc max=80℃ Net Weight 1.09Kg/pcs 1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured: at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor. 3. Output voltage and current can be adjusted by internal potentiometer (“A” type only). 4. Tolerance: includes set up tolerance, voltage line regulation and voltage load regulation. Note 5. Constant current operation region is within 60% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 6. Derating may be needed under low input voltages. Please check the Static Characteristics for more details. 7. Safety and EMC design refer to EN60598-1, subject 8750 (UL), CNS15233, GB7000.1, FCC part18. 8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 WWW.ASTRODYNETDI.COM Rev.3 MAY.2014 www.tonlier.com 2 DR150 Series ® D RDriver 1 5 0 series 150W Single Output LED 150W S i n g l e Ou t put LE D D ri v er w it h P FC TABLE 2： Model DR150-048S315X-YY DR150-036S420X-YY DR150-024S625X-YY DR150-086S175X-YY DR150-062S245X-YY 48Vdc 36Vdc 24Vdc 86Vdc 62Vdc 28 ~48Vdc 21~36Vdc 14~24Vdc 52 ~86Vdc 37~62Vdc DC Voltage Constant Current Operation Voltage note.5 Rated DC Current Current Range Output Output Protection Environmental Safety＆EMC 4200 mA 6250 mA 1750 mA 2450 mA 0~4200mA 0~6250mA 0~1750mA 0~2450mA Dimming Current Range 10~100% rated output current (≥50% rated output voltage) Ripple and Noise 10%Vo 10%Vo 10%Vo 10%Vo 10%Vo Voltage ADJ. Range note.3 43~50Vdc 32~38Vdc 22~25Vdc 77~90Vdc 56~65Vdc Current ADJ. Range note.3 1890~3150mA 2520~4200mA 3750~6250mA 1050~1750mA 1470~2450mA Voltage Tolerance ±5% ±5% ±5% ±5% ±5% Voltage Line Regulation ±1% ±1% ±1% ±1% ±1% Voltage Load Regulation ±5% ±5% ±5% ±5% ±5% Efficiency Input 3150 mA 0~3150mA Power Factor AC Current 91% 91% 90% 91% 91% 0.96/230Vac 0.96/230Vac 0.96/230Vac 0.96/230Vac 0.96/230Vac 1.8A/100Vac, 0.9A/230Vac Leakage Current <0.75mA/230Vac; <0.5mA/120Vac Over Current Constant current limiting Short Circuit Non-dimmer type: recover automatically at hiccup; Dimmer type: Short-circuit power ≤10W. Over Voltage Shut down at 140% Vo and latch off o/p voltage, re-power on to recover Operating Humidity 20~95% RH, non-condensing Storage Humidity 10~95% RH Temperature Coefficient ±0.03%/℃ (0~50℃) Vibration 10~300Hz, 1G, Period for 60min, each along X、Y、Z axes. Withstand Voltage I/P-OP: 3.75KVac; IP-FG: 1.56KVac/2.00KVac (remove discharge tube); O/P-FG: 2.00KVac Isolation Resistance IP-OP, IP-FG, O/P-FG: 100M Ohms/500Vdc/25℃/70% RH EMC Interference Compliance to EN55015, EN55022 (CISPR22) Class B EMC Emission Compliance to EN61000-3-2 Class C (≥50%load); EN61000-3-3 EMC Immunity Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, EN61547, EN55024 Authentication Others UL/TUV/CE/FCC/RoHS/CQC/REACH MTBF 319k Hrs at full load and 30℃ ambient conditions per MIL-HDBK-217F Input Over-voltage Can survive input over-voltage stress of 320Vac for 48 hours Dimensions (mm) 226×68×40 Max. Case Temp. Tc max=80℃ Net Weight 1.09Kg/pcs TUV/CE/ RoHS/REACH 1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured: at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor. 3. Output voltage and current can be adjusted by internal potentiometer (“A” type only). 4. Tolerance: includes set up tolerance, voltage line regulation and voltage load regulation. Note 5. Constant current operation region is within 60% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 6. Derating may be needed under low input voltages. Please check the Static Characteristics for more details. 7. Safety and EMC design refer to EN60598-1, subject 8750 (UL), CNS15233, GB7000.1, FCC part18. 8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 WWW.ASTRODYNETDI.COM Rev.3 MAY.2014 www.tonlier.com 3 DR150 Series ® D RDriver 1 5 0 series 150W Single Output LED 150W S i n g l e Ou t put LE D D ri v er w it h P FC TABLE 3： Model DR150-043S350X-YY DR150-031S490X-YY DR150-026S595X-YY DR150-020S750X-YY 43Vdc 31Vdc 26Vdc 20Vdc 26~43Vdc 18~31Vdc 15~26Vdc 12~20Vdc DC Voltage Constant Current Operation Voltage note.5 Rated DC Current Current Range Output Output Protection Environmental Safety＆EMC Others 4900 mA 5950 mA 7500 mA 0~4900mA 0~5950mA 0~7500mA Dimming Current Range 10~100% rated output current (≥50% rated output voltage) Ripple and Noise 10%Vo 10%Vo 10%Vo 10%Vo Voltage ADJ. Range note.3 39~45Vdc 28~33Vdc 23~27Vdc 18~21Vdc Current ADJ. Range note.3 2100~3500mA 2940~4900mA 3570~5950mA 4500~7500mA Voltage Tolerance ±5% ±5% ±5% ±5% Voltage Line Regulation ±1% ±1% ±1% ±1% Voltage Load Regulation ±5% ±5% ±5% ±5% Efficiency Input 3500 mA 0~3500mA Power Factor AC Current 91% 91% 90% 90% 0.96/230Vac 0.96/230Vac 0.96/230Vac 0.96/230Vac 1.8A/100Vac, 0.9A/230Vac Leakage Current <0.75mA/230Vac; <0.5mA/120Vac Over Current Constant current limiting Short Circuit Non-dimmer type: recover automatically at hiccup; Dimmer type: Short-circuit power ≤10W. Over Voltage Shut down at 140% Vo and latch off o/p voltage, re-power on to recover Operating Humidity 20~95% RH, non-condensing Storage Humidity 10~95% RH Temperature Coefficient ±0.03%/℃ (0~50℃) Vibration 10~300Hz, 1G, Period for 60min, each along X、Y、Z axes. Withstand Voltage I/P-OP: 3.75KVac; IP-FG: 1.56KVac/2.00KVac (remove discharge tube); O/P-FG: 2.00KVac Isolation Resistance IP-OP, IP-FG, O/P-FG: 100M Ohms/500Vdc/25℃/70% RH EMC Interference Compliance to EN55015, EN55022 (CISPR22) Class B EMC Emission Compliance to EN61000-3-2 Class C (≥50%load); EN61000-3-3 EMC Immunity Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, EN61547, EN55024 Authentication TUV/CE/ RoHS/REACH MTBF 319k Hrs at full load and 30℃ ambient conditions per MIL-HDBK-217F Input Over-voltage Can survive input over-voltage stress of 320Vac for 48 hours Dimensions (mm) 226×68×40 Max. Case Temp. Tc max=80℃ Net Weight 1.09Kg/pcs 1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured: at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor. 3. Output voltage and current can be adjusted by internal potentiometer (“A” type only). 4. Tolerance: includes set up tolerance, voltage line regulation and voltage load regulation. Note 5. Constant current operation region is within 60% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 6. Derating may be needed under low input voltages. Please check the Static Characteristics for more details. 7. Safety and EMC design refer to EN60598-1, subject 8750 (UL), CNS15233, GB7000.1, FCC part18. 8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 WWW.ASTRODYNETDI.COM Rev.3 MAY.2014 www.tonlier.com 4 DR150 Part number code 150W S i n g l e Ou t put LE D D ri v er w it h P FC Part number R 045 - 024 S 190 TC D code Lighting products D 150 - R series A Optional mode: output voltage and current are 024 S 625 TC Aadjustable (IP65 rated) Optional mode: output voltage and current are Lighting products letters Optionaladjustable mode：two (IP66 rated) Default：no additional features ，output voltage and current can regulation TC: 3 in 1 dimming function(PWM 、resistance, voltage) Optional mode：two letters Default：no additional features，output voltage and current can regulation TC: 3 in 1 dimming function (PWM, resistance, voltage) R：High performance LED driver E：Economical LED driver R：High performance LED driver E：Economical LED driver Output current(*10mA) ：three numbers Filled 0 in front of it when less than 3; four numbers are available if needed. For example:190means 1900mA ，035 means 350mA Output current(*10mA) ：three numbers Filled 0 in front of it when less than 3; four numbers are available if needed. For example:625 means 6250mA ，035 means 350mA letter or number Output channel：one Output power(W): three numbers Filled 0 in front of it when less than 3. Output power(W): three numbers Filled 0 in front of it when less than 3. Output voltage(V)：three numbers Filled 0 in front of it when less than 3. For example:105 means 105V ，024means24V S: Single channel output D: Double channel output T: Triple channel output Q: Quadruple channel output F: Quintuple channel output H: sextuple channel output Output channel：one letter or number S: Single channel output D: Double channel output T: Triple channel output Q: Quadruple channel output F: Quintuple channel output H: sextuple channel output Output voltage(V)：three numbers Filled 0 in front of it when less than 3. For example:105 means 105V ，024means24V For example: DR045-024S190TC means it is a high performance LED driver, output power 45W, output For example: DR150-024S625TC means it is a high performance LED driver, output power 150W, output voltage 24Vdc, output current 1900mA ，single output，with 3 in 1 dimming function. voltage 24Vdc, output current 6250mA ，single output，with 3 in 1 dimming function. . . wiring diagram wiring diagram ACL ACL BROWN BROWN ACN ACN BLUE BLUE V+ BROWN CEV+ BROWN V- BLUE V- BLUE OR OR CE CE CE GND GREEN GND YELLOW YELLOW GREEN ACL BLACK ACL BLACK ACN WHITE WHITE OR OR UL UL OUTPUT WIRES OUTPUT WIRES INPUT WIRES INPUT WIRES GND GREEN GND GREEN WWW.ASTRODYNETDI.COM LED DRIVER LED DRIVER DIMMING WIRES DIMMING WIRES V+ RED V+ RED UL UL V- BLACK V- BLACK TC TC AGND DIM+ BLACK Purple PVR ORANGE DIM- Grey ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 DR025 Series ® D RLED 1 5Driver 0 series 25W Single Output 150W S i n g l e Ou t put LE D D ri v er w it h P FC ■ Derating Curve load (%) Derating Curve 110VAC ~277VAC 100 80 60 40 20 0 -40 -5 -25 0 15 30 50 60 70 Ambient Temperature (℃) ■ Static Characteristics load (%) Derating Curve 100 80 60 40 20 0 0 100 110 180 210 240 260 280 305 Input Voltage (V) 60Hz WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 DR150DSeries R150 ® 150W S i n g l e Ou t put LE D D ri v er w it h P FC 150W Single Output LED Driver series ■ Power Factor Characteristic (DR150-054S280) 1.02 PF 0.97 0.92 110VAC 230VAC 0.87 277VAC 0.82 50% 60% 70% 80% 90% 100% LOAD ■ EFFICIENCY vs LOAD (DR150-054S280) 96 EFFICIENCY 91 86 81 76 110VAC 71 230VAC 66 277VAC 61 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD VO ■ Typical LED power supply I-V curve 100% 60% (A) Constant voltage area (C) Non-Dimming hiccup protection area (B) Constant current area (D) Dimming constant current area 50% 100% ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 WWW.ASTRODYNETDI.COM Rev.3 MAY.2014 IO www.tonlier.com 7 D RSeries 1 5 0 series DR150 ® 150W S i n g l e Ou t put LE D D ri v er w it h P FC 150W Single Output LED Driver ■ Mechanical Outline Unit：Inches[mm] ACL（BLACK） ACN（WHITE） （GREEN） DIM+(PURPLE) DIM-(GREY) DIMMING (2*22AWG ) Tcase V+(RED) V-(BLUE) Vo Adj. Io Adj. AC Input(3*18AWG) DC Output(2*18AWG ) WIRE SPECS: AC Input: UL SJTW DC Output: UL SJTW Dimming Control: UL2464 ※Tcase: Max. Case Temperature ※Power's internal temperature is 10 ℃ warmer than case temperature. ※No dimming control wire if without dimming function. NO. DC Output Current 1 2 Wire Number Wire specfication ≤5A 5~12A(Including 12A) 1 2×AWG18 1 2×AWG16 ■ “A” option a. Output voltage and current can be adjusted by internal potentiometer. b. IP65. c. These products shall be enclosed in the end product, when the unit provided with voltage and current adjustable holes. ■ “-TA” option: DALI dimming a. DALI Testing Software: Please refer to www.tonlier.com for downloading. b. Percentage of rated current: 10%~100%. c. “TA” version LED driver shall work with a DALI Master and DALI Master control software. Computer WWW.ASTRODYNETDI.COM DALI Master LED Driver Lighting ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 DR025 Series ® R 1Driver 5 0 series 25W Single OutputDLED 150W S i n g l e Ou t put LE D D ri v er w it h P FC ■ “-TC” option: 0-10V, resistance & PWM dimming Percentage of rated current a. Reference resistance value for output current adjustment (Typical) 100% 10% 0Ω 10kΩ 100kΩ Resistance value Percentage of rated current b. 0-10V dimming function for output current adjustment (Typical) 100% 10% 0V 1V 10V Dimming value Percentage of rated current c. 10V PWM signal for output current adjustment (Typical): Frequency range: 200Hz~1.5KHz 100% 10% 0 10% 100% Duty value WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 DR150 150W S i n g l e Ou t put LE D D ri v er w it h P FC series Dimming control details: Parameters Dimming Type Minimum Typical Maximum Resistance 0kΩ 0-100kΩ ∞ Voltage -2V 0-10V 15V PWM(10%~100% f=200Hz~1.5KHz) -2V 0-10V 15V -0.5mA - 0.5mA Dimming Current Input and output Dielectric strength Isolation Input Wires Output Wires Isolated Dimming Control Wires Chassis Input Wires NA 3750 2000 1560 Output Wires 3750 NA 2000 2000 Isolated Dimming Control Wires 2000 2000 NA 2000 Chassis 1560 2000 2000 NA Output current (Io) Fixed derating-cutoff type temperature protection 100% 20% ≤10% 105�C 125�C 95�C Case temperature (TC) WWW.ASTRODYNETDI.COM 2015 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458