DR60 60W S i n g l e Ou t p ut I ndus t ri al D I N R ail Po we r Su p p ly series Universal AC input Protections: Short circuit / Overload / Over voltage Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Isolation class II LED indicator for power on Model Number Output Volts Output Amps Min Load Efficiency Ripple and Noise DC Volt Adjust SINGLE OUTPUT DR60-5 DR60-12 DR60-15 DR60 -24 5 Volts(DC) 12 Volts(DC) 15 Volts(DC) 24 Volts(DC) 0 ~ 6.5Amps 0 ~ 4.5Amps 0 ~ 4Amps 0 ~ 2.5Amps 76% 82% 83% 84% 4.75~5.5V 11.1~13.2V 13.5~16.5V 21.6~26.4V 6.5 Amps 4.5 Amps 4 Amps 2.5 Amps WWW.ASTRODYNETDI.COM 80mVpk-pk 120mVpk-pk 120mVpk-pk 150mVpk-pk OVP 5.75~6.75V 13.8~16.2V 17.25~20.25V 27.6~32.4V ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 DR60 60W S i n g l e Ou t p ut I ndus t ri al D I N R ail Po we r Su p p ly INPUT SPECIFICATIONS Input Voltage Range Frequency Range Inrush Current, typ: (cold start) Input Current Leakage current DC Voltage Adjust GENERAL SPECIFICATIONS 90~264VAC / 124-370 Volts (DC) 47-63 Hz 18 Amps @ 115VAC 36 Amps @ 230VAC 1.2 Amps. @ 115VAC 0.8 Amps. @ 230VAC < 1mA / 240VAC See Selection Chart OUTPUT SPECIFICATIONS Voltage and Current Line Regulation Load Regulation Voltage Tolerance (Note 2) Ripple/Noise (Note 1) Hold Up Time @ FL Setup, Rise Time @ FL Over Current Protection Over Voltage Protection DC Voltage Adjust series See Selection Chart ±1% ±1% ±2% 5Volts(DC) only ±1% 12~24Volts(DC) See Selection Chart 100mS @ 230VAC 23mS @115VAC 100ms, 30ms/230VAC 200mS, 30mS/115VAC 105~160% rated output power Constant current limit,auto recover See Selection Chart Shut down o/p voltage, re-power See Selection Chart All specifications are typical at nominal input, full load, and 25°C unless otherwise noted Safety Insulation Resistance EMI Harmonic Current Isolation EMS UL60950-1 TUV EN60950-1 approved Design refer to EN50178 ≥ 100MΩ / 500Volts(DC) Compliance to EN55022B (CISPR22B) Compliance to EN61000-3-2,-3 3000VAC Input - Output Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024, EN61000-6-2, EN61204-3,heavy industry level, criteria A ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Storage Temperature Relative Humidity Temperature Coefficient MTBF Vibration -20°C to +60°C (See derate curve) -40°C to +85°C, 10~95% RH 20 to +90% RH ±0.03% / °C (0-50°C) 216.2K Hrs min, MIL-HDBK-217F(25°C ) 10~500Hz, 2G10min./1cycle, period for 60min. each along X, Y, Z axes PHYSICAL SPECIFICATIONS Size Millimeters 78 x 93 x 56 Inches 3.07” x 3.66 ” x 2.20 ” Weight 10.58 oz (300g) NOTE 1. Ripple & Noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Tolerance: includes set up tolerance , line regulation and load regulation. WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 60W S i n g l e Ou t p ut I ndus t ri al D I N R ail Po we r Su p p ly WWW.ASTRODYNETDI.COM DR60 series ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 60W S i n g l e Ou t p ut I ndus t ri al D I N R ail Po we r Su p p ly WWW.ASTRODYNETDI.COM DR60 series ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458