Astrodyne Corporation Tel: (508) 964-6300 35 Hampden Road Fx: (508) 339-0375 Mansfield, MA 02048 [email protected] uV300-28-164 ® 300 VDC Input 300 Watts 3/4 Brick MICROVERTER -164 DC/DC Converter The MICROVERTER ® 164 Series is a second generation product which combines high efficiency electrical power design and proprietary advanced thermal management techniques including insulated metal substrate technology, specialty dielectrics and formulated thermally conductive potting to produce small, ruggedized DC/DC converters with reduced temperature rise and increased reliability. This series is ideal for use in rugged, thermally challenged applications requiring baseplate cooled operation such as military systems, RF/power amplifiers, commercial avionics and industrial control. All RO products are normally manufactured using a tin-lead soldering process. The MICROVERTER ® 164 Series is also available in both full RoHS compliant (utilizing lead free solder) and full tin-lead (no pure tin) configurations. All models are designed to meet international safety standards. OPERATIONAL FEATURES ORDERING INFORMATION • Encapsulated & Environmentally Rugged Package • Extremely Low Thermal Resistance • -40 ~ 100°C Baseplate Operation – Standard -55 ~ 125°C Baseplate Operation – Optional • Constant Frequency Operation for Reduced Noise • Remote On/Off, Parallel and Remote Sense Functions • Auto-Recovery from OTP / OCP / OVP Circuits • Trimable Output • Synchronizable from 330-400KHz (Optional) • 2 Year Warranty Model Number Input Voltage Range Output Voltage Output Current uV300-28-164 220-400 VDC 28 (25.2-30.8 VDC) 11A uV300-28-XXX-164YY XXX YY S= Synchronization 330-400KHz RL= No Pure Tin T= -55°C to 100°C Operating Temperature LF= RoHS Compliant C= Conformal Coating no suffix is required for E= -55°C to 125°C (Consult the factory for output power rating) standard tin-lead finish Part Number Example: uV300-28-STC-164RL Synchronization, -55 °C to 100°C, Conformal Coating, No Pure Tin www.astrodyne.com www.roassoc.com Astrodyne USA: 1-800-823-8082 Astrodyne Pacific: 886-2-26983458 uV300-28-164 300 VDC Input / 300 Watts / 3/4 Brick ABSOLUTE MAXIMUM RATINGS Exceeding absolute maximum ratings may cause permanent damage or reduce reliability Parameter Option Minimum Maximum Units Conditions Input Voltage ( + In to -In) -0. 3 400 VDC Continuous Transient Input Voltage (+In to -In) -0. 3 100 msec. Max. 450 VDC Input/Output Is olation 4500 VDC Input/Cas e Is olation 2500 VDC 500 VDC Output/Cas e Is olation Storage Temperature Standard Operating Temperature -40 Input Input Voltage -55 +110 °C E -55 +130 °C Standard -40 +100 ºC Baseplate T -55 +100 °C Baseplate E -55 +125 °C Baseplate 260 ºC < 5 sec. Electrical specifications apply for Vin=300VDC, Vout=28VDC, Full Load, Tc=25ºC unless specified otherwise Minimum Typical Maximum Units 220 300 400 VDC ADC Vin= 220V, Tc= 25ºC 2.0 ADC Vin=220V, Tc=100ºC Maximum Input Current 1. 8 Input R ipple R ejection Output ºC T Soldering Temperature (Wave Solder) ELECTRICAL SPECIFICATIONS +110 70 dB Conditions f= 120Hz, Vin ripple= 15V p-p Minimum Typical Maximum Units 27. 72 28. 01 28. 28 VDC Load R egulation 0. 05 0. 2 % 0 to Full Load Line R egulation 0. 05 Voltage S et Point Voltage Drift w/Temperature R ipple ( PAR D) 170 R ated Current Overcurrent Inception Point 105 115 S hort Circuit Current Conditions 0. 2 % Vin min to Vin max 0. 02 % / ºC Tc min to Tc max 300 mV p-p Vin= 300V, Tc= 25ºC 450 mV p-p 220V<Vin<400V, -40ºC<Tc<+100ºC 11 A 130 170 % Rated % R ated Vout=95% Vout nominal 220V< Vin< 400V, R s hort= 15 mOhm Trans ient R es pons e Deviation 1600 mV 20-80% R ated Current, 0. 5A/µs Trans ient R es pons e S ettling Time 200 µs 20-80% Rated Current, 0.5A/µs, ±1% Vo % Vin= 300V, Iout= 75% R ated Efficiency Is olation 88 Minimum Typical Maximum Units Conditions S pecial Tes t Method R equired Input-to-Output 4500 VDC Input-to-Cas e 2500 VDC Output-to-Cas e 500 VDC Input-to-Output Capacitance Input-to-Output R es is tance 5600 10 pF Meg Ohm 500V www.astrodyne.com www.roassoc.com Astrodyne USA: 1-800-823-8082 Astrodyne Pacific: 886-2-26983458 uV300-28-164 300 VDC Input / 300 Watts / 3/4 Brick ELECTRICAL SPECIFICATIONS Continued Control Option Over Temperature Shutdown Temp (Tc) Minimum Standard & T Maximum 105 E Over Temperature Restart Temp (Tc) Typical °C 85 ºC 105 S tart-up Voltage 175 Input Under Voltage Lock Out 130 Turn-on Time 18 Logic On/Off Enable S ignal °C 200 VDC 30 ms ec 220< Vin< 400V, Tc= 25ºC 40 msec 220<Vin<400V, -40ºC<Tc<+100ºC VDC Positive Logic, open collector enables. Do not pull up. 0. 6 VDC I On/Off= 1mA 10 ms ec 30. 8 VDC S ee Trim Formula and Diagrams 35. 0 VDC Non-shutdown, Auto Recovery, Iout=50% Rated 0. 5 VDC VDC Open Logic On/Off Dis able S ignal Logic On/Off Turn-on Time 5 Trim R ange 25. 2 OVP Trip Point 31. 2 32. 9 R emote S ens e Compens ation Current S haring ( Parallel Operation) 5 % 370 KHz S tandard Model 300 KHz -S Sync Option Model 440 KHz Using Optional Sync Pin and External Sync Signal Maximum Units Conditions 4. 2 ºC/W Free Air, No Heats ink, Tc= 100ºC 0.5 x 2.4 x 3.6 (12.7 x 61.0 x 91.4) in (mm) 3/4 Brick, See Outline Drawing 5. 7 ( 161) oz. ( g) S witching Frequency S ynchronization Frequency R ange 330 Thermal / Mechanical Parameters Minimum Thermal R es is tance, Cas e to Ambient Size, HxWxL Weight Conditions ºC 130 Standard & T Units Typical Us ing Parallel Pin Connection or PDM TRIM R trim-up = R trim-down = Trim Down Trim Up 62.75K Ω ∆V 1109-41.83 ∆ V ∆V KΩ ∆ V = | Desired Output Voltage Change (Volts) | R trim-up = External Resistor Value to Increase V out R trim-down = External Resistor Value to Decrease V out www.astrodyne.com www.roassoc.com Astrodyne USA: 1-800-823-8082 Astrodyne Pacific: 886-2-26983458 uV300-28-164 300 VDC Input / 300 Watts / 3/4 Brick EFFICIENCY VS. LOAD, OUTPUT RIPPLE, Vin=300V Vin=300V, Iout=11.0A, Tc=25ºC 90 Efficiency (%) 85 80 50mV per div. TC = 25°C TC = 100°C 75 70 65 0 2.0 4.0 6.0 8.0 10.0 Output Current (A) LOSSES VS. LOAD, t, 1 µs/div. TRANSIENT RESPONSE, Vin=300V 30MHz BWL Vin=300V, Iout=2.2A-8.8A-2.2A, Tc=25ºC 50 Vout, 1.0V/div. 45 40 30 25 20 15 TC = 25°C TC = 100°C 10 5 0 0.0 2.0 4.0 6.0 8.0 10.0 lout, 2.2A/div. Losses (W) 35 t, 100 µs/div. 30MHz BWL Current Slew Rate 0.5A/ Output Current (A) INPUT CHARACTERISTIC, OUTPUT CHARACTERISTIC, Iout = 11.0A, TC=25ºC 1.5 1.0 0.5 0.0 Vin=300V, TC=25ºC 30 Output Voltage (V) Input Current (A) 2.0 µs 25 20 15 10 5 0 0 50 100 150 200 250 Input Voltage (V) 300 350 400 0 20 40 60 80 100 120 140 160 Output Current (% of Full Load) www.astrodyne.com www.roassoc.com Astrodyne USA: 1-800-823-8082 Astrodyne Pacific: 886-2-26983458 uV300-28-164 300 VDC Input / 300 Watts / 3/4 Brick OUTLINE DRAWINGDimensions in Inches NOTES REV 090410 www.astrodyne.com www.roassoc.com Astrodyne USA: 1-800-823-8082 Astrodyne Pacific: 886-2-26983458