Technical data Further information on the products presented here and on the world of solutions from Phoenix Contact can be found at Number of contacts: 2 ribbons plus 1 diode www.phoenixcontact.net/catalog Contact spacing: 20 mm (customer-specific adaptations are possible) Ribbon dimensions: width of up to 4 mm/thickness 0.2 mm External cable diameter: 5.5 mm ± 0,2 mm Type of protection: IP65 Corresponds to the V VDE 0126-5 requirements Automatic contacting when mounted. SUNCLIX junction box For an automated process Industrial Connection Technology, Marking Systems and Mounting Material The SUNCLIX junction box contacts the photovoltaic modules quickly and reliably in one step. It is specially designed for thin-film modules or crystalline modules of small performance classes. The special feature is the fully automated assembly of the junction box. It is simply aligned with the upright contact ribbons and pressed against the module – that‘s it! Customer-specific adaptation is possible for individual requirements, for instance regarding contact spacing or cable cross-section. CLIPLINE Connection Technology for Field Devices and Field Cabling PLUSCON Or contact us directly. Device Connection Technology and Electronic Housings Surge Protection TRABTECH Signal Converters, Switching Devices, Power Supplies © PHOENIX CONTACT 2009 COMBICON Assembly steps: Components and Systems Printed in Germany INTERFACE 1. Position the junction box above the ribbon 2. Mount the junction box, the ribbon is gripped automatically 3. Press the junction box down, the ribbon is contacted automatically and the box is firmly glued PHOENIX CONTACT GmbH & Co. KG D-32823 Blomberg, Germany Phone: +49/5235/3-00 Fax: +49/5235/3-1 07 99 www.phoenixcontact.com MNR 52005129/15.05.2009-00 AUTOMATION SUNCLIX The first toolless connection system for photovoltaics The first toolless connection system for photovoltaics – simple efficiency! SUNCLIX connectors Non-stop up to the inverter Say goodbye to crimping pliers, shrink sleeves and other compromises. From now on, when installing photovoltaic systems, you can wire varying cable lengths from the module to the inverter considerably more efficiently – with SUNCLIX. The field assembly SUNCLIX connector can be connected quickly, easily and reliably without any special tools: 1. Insert the stripped PV conductor 2. Press down the spring and snap it in 3. Tighten the screw connection – that's it! ohn s g ol th k u ze e ez i alwer wi There is nothing more to prevent module manufacturers from increasing productivity. The 100% automated SUNCLIX junction box simplifies the processes and thus reduces costs. Sp Especially the last cable section to the solar inverter usually has an indefinite and variable length. SUNCLIX connectors make connecting the conductor to the SMA inverter faster and simpler than previously. The interlocking of field and device connectors that can only be opened using a screwdriver prevents accidental removal of the connector from the inverter. ou t s p ec i al to Can only be unlocked with a screwdriver Technical data Voltage: 1100 V Current: 40 A already with 4 mm2 Cable cross-section: 2.5 to 6 mm2 Type of protection: IP68 Temperature range: -40°C to +90°C Degree of protection: II SUNCLIX – a complete system from the module to the inverter. Meets the requirements of DIN EN 50521 No special tools needed. Can be unlocked with a screwdriver. SUNCLIX connectors A revolution in installation The SUNCLIX connectors that can be assembled in the field help you to save costs and time. The connector is supplied preassembled, so that no extra parts are necessary. The spring-cage connection allows an easy and quick on-site connection without any special tools. Simply insert the conductor, close the spring, tighten the screw connection and you‘re done! Order numbers: Plug connector, female (+) : 1774674 Plug connector, male (-) : 1774687 PHOENIX CONTACT Assembly steps: 1. Insert the stripped PV conductor 2. Press down the spring and snap it in 3. Tighten the screw connection – that‘s it! PHOENIX CONTACT