Ethernet 10Mbps Transceiver Key Features ETC-0100AF ETC-0102TA ETC-0103BA 10Mbps Ethernet Transceiver IEEE802.3 compliant 10 Base2, 10BaseT 10 BaseFL/FOIRL AUI connection according to Attachment Unit Interface standard Wide optic input dynamic range (ETC-01100AF) Polarity detection and Auto-correction (ETC-0102TA) Switch-selectable SQE-Test (heartbeat) LINK-Status LED Let the net work Ethernet 10Mbps Transceiver The LevelOne Media Transceiver Series are 10Mbps compliant devices developed to provide optimal connectivity in mixed media environments. The connectivity range covers BNC/Coax, Twisted Pair Cat.5 up to Fiber-Optic 10BaseFL down-compatible to 10Base FOIRL ( Fiber Optic Inter Repeater Link). Supported wire length is 185 m Coax, 100 m TP and up to 2 km Fiber-Optic cable according to IEEE802.3 Product Specifications Switchable SQE/Heartbeat testpulses are standard on all LevelOne Transceivers and give easy test opportunities for maintenance and service. General Host Interface • AUI-Connector 15pin SUB-D with slide lock Dimensions • 6 x 4 x 2 cm appx. Weight • 70 gramms Opreating Temperature • 0 - 50°C Storage Temperature • -20 to 60°C Humidity • 5 to 80 % non-condensing Certificates • CE, FCC Copper based Transceivers TP-Interface • RJ45 shielded Jack COAX-Interface • BNC-Jack www.level-one.net · LevelOne DS-909/1 Fiber Optic Data (ETC-01100AF only) Wavelength • 850nm +/- 20nm Sensitivity • -32dBm Fiber • 50 or 62,5µm multimode Ordering Information ETC-0102TA • 10Mbps Ethernet Transceiver, AUI/STP ETC-0103BA • 10Mbps Ethernet Transceiver, AUI/BNC ETC-01100AF • 10Mbps Ethernet Transceiver, AUI/Fiber Optic ST The Link control LED provided on LevelOne Transceivers indicates the proper static link status monitored independently from networking signals and traffic. The mandatory use of SMT-components followed by an excessive burn-in test and artificialy aging of the device delivers an optimal HiRel product with zero-failure charateristic - the optimal choice for connectivity.