300Mbps Wireless Dual-PoE Managed Access Point

300Mbps Wireless
Dual-PoE Managed
Access Point
EAP-200
H/W Version: 1
Product Overview
Tunnel-based AP Management
The LevelOne EAP-200 Enterprise Access Point is
designed for wireless connectivity in enterprise or
industrial environments. It provides a IP50 dustproof metal housing, embedded with 2T/2R MIMO
technology on 2.4GHz frequency for wireless data
rates of up to 300Mbps.
EAP-200 enables a fast and secured communication.
It supports Tunnel-based AP Management, business
grade security with WEP, WPA, WPA2, IEEE 802.1x, and
Wi-Fi Protected Access. By pushing the WES (Pressand-Connect) button the EAP-200 can easily establish
a WDS connection of multiple EAP-200s to increase
the wireless network coverage. It features multiple
ESSIDs with VLAN tags to separate network traffics;
one EAP-200 can emulate up to 8 Virtual APs. The
Tunneled AP Management works well with LevelOne
Secure WLAN Controllers WHG-xxx.
Supports data rates up to 300Mbps
EAP-200 complies with 802.11b/g/n standards for
wireless speed up to 300Mbps and is an ideal solution
for video surveillance and multimedia streaming
applications. It features QoS and WMM to ensure the
quality of voice and video applications for multiple
transmissions simultaneously.
1
2
3
4
Key Features
-2 antennas with 2T/2R MIMO Technology for wireless
data rates of up to 300Mbps
- Compatible with IEEE 802.3af PoE standard
- Dual-PoE design eliminates the need for power
sockets
- Enables Multiple Virtual APs and Client Isolation
- Easy configuration and management via web
browser and SNMP
- Supports AP and Repeater modes, Class of Service
and QoS
- Supports AP Management with LevelOne Secure
WLAN Controllers WHG-xxx
- Supports Data Encryption and User Authentication
with WEP, WPA, WPA2, IEEE 802.1x
- Supports WES push button for auto WDS connection
- Antenna type: 5dBi at 2.4GHz
- Wall mountable IP50 dust-proof Metal Housing
EAP-200 provides a higher throughput, security and
durability and makes it a perfect choice for your
wireless connectivity.
10
9
8
7
6
5
1. Power Port
2. DC12V power socket
3. Reset Button
4. PoE LAN2 Port
5. PoE LAN1 Port
6. Console Port
7. WES Button
8. USB Port
9. Wall-Mountable
10. Detachable Antenna
Works well with
WHG-401
Secure WLAN Controller
WHG-505
Secure WLAN Controller
www.level1.com I one world_one brand_one level_
Access Point
Technical Specification
Wireless Radio
-Standard
IEEE 802.11b/g 2.4GHz
IEEE 802.11n 2.4GHz
IEEE 802.3af Power over Ethernet
-Frequency band: 2.4GHz
-Wireless architecture:
(1) AP mode
(2) Repeater mode (WDS / Universal Repeater)
-Modulation:
(1) OFDM (64-QAM, 16-QAM, QPSK, BPSK)
(2) DSSS (CCK, DBPSK, DQPSK)
-Channels:
(1) USA (Channel 1~11)
(2) Japan (Channel 1~14)
(3) Europe (Channel 1~13)
-Data rate with auto fallback:
(1) 802.11b: 1 ~ 11Mbps
(2) 802.11g: 6 ~ 54Mbps
(3) 802.11n: 6.5 ~ 300Mbps
-Transmit Power:
(1) 802.11b: up to 18 dBm
(2) 802.11g: up to 16 dBm
(3) 802.11n: up to 16 dBm
-Receiver Sensitivity:
(1) 802.11b: [email protected] dBm
(2) 802.11g: [email protected] dBm
(3) 802.11n: [email protected] dBm
Antenna
2x 5dBi
Detachable with SMA connectors
QoS-WMM
-DiffServ/TOS
-IEEE 802.1p/COS
-IEEE 802.1Q Tag VLAN priority control
-IEEE 802.11e WMM
Handover & Roaming
-IEEE 802.11f IAPP
-IEEE 802.11i pre-auth (PMKSA cache)
System Management
-Web-based administration
-SNMP v1/v2c
-Provides Event Log
-SYSLOG information support
-Configuration backup and restore
-Restore to factory default setting via Web or Console
-Firmware upgrade
-Capable of performing RADIUS Accounting and Accounting
Update
-WES (Press-and-Connect) button for WDS Easy Setup
-Supports Tunneled AP Management with LevelOne Secure
WLAN Controllers
Security
-WEP (64/128/152 bits)
-EAP-TLS + Dynamic WEP
-EAP-TTLS + Dynamic WEP
-PEAP/MS-PEAP + Dynamic WEP
-WPA (PSK + TKIP)
-WPA (802.1X certification + TKIP)
-802.11i WPA2 (PSK + CCMP/AES)
-802.11i WPA2 (802.1X certification + CCMP/AES)
-Setting for TKIP/CCMP/AES key's refreshing period
-Hidden ESSID support
-Layer 2 wireless isolation
-Wireless Layer 2 Firewall
-MAC Address filtering (MAC ACL)
-MAC authentication with RADIUS servers
-Maximum number of registered RADIUS servers: 2
Built-in Servers & Client Interfaces to Other Services
-DHCP client
-DNS client
-SYSLOG client
-RADIUS client
-SNMP v1/v2c client
Wireless Signal Management
-Number of ESSIDs (Virtual APs): 8
-Number of associated clients per system: 128
-Setting for maximum number of associated clients
Hardware Specifications
-IP50 Dust-proof metal case
-LAN Port: 2 × 10/100 Base-T Ethernet with PoE
-Console Port: 1 x DB9
-USB Port: 1
-Screw Terminal Block: 1
-LED Indicators: 1 × Power, 2 × LAN, 1 × WLAN, 1 × WDS, 1 ×
WES, 1 × USB
Physical and Power
-Power adapter (included)
1. AC Input: 100~240 VAC, 50~60Hz
2. DC Output: 12V, 1.5A
-Alternative Power:
1. 802.3af PoE (PSE not included)
2. 12~48V DC power input
-Form factor: Wall Mountable
-Dimensions (W x D x H): 8.0" x 5.3" x 1.4"
(204 mm x 134 mm x 35 mm)
-Weight: 1.3 lbs (0.61 kg)
Environment
-Operation Temperature: -30°C ~ 70°C
-Storage Temperature: -40°C ~ 85°C
-Operation Humidity: 10% ~ 80% (Non-condensing)
-Storage Humidity: 5% ~ 90% (Non-condensing)
Certifications
-FCC, CE
-RoHS compliant
Product Diagram
Connect with WLAN Controller
Internet
xDSL
xDSL
Internet
Net Retriever
POP3,
RADIUS,
LDAP,
Windows
Domain
EAP-200
PMS
Managed APs
PoE Switch
EAP-300
Connect in Repeater mode
Ethernet Cable (RJ 45)
Phone Line (RJ 11)
PoE
Hotel
EAP-200
Internet
Excelent Ranbe
and Coverage
EAP-200
PoE Switch
10/100Mbps
ADSL + Router
SSID1
SSID2
Order Information
EAP-200: 300Mbps Wireless Dual-PoE Managed Access Point
Package Content
EAP-200 , CD Manual/QIG, Quick Installation Guide (QIG), Console Cable
Ethernet Cable, Power Adapter, Antenna x 2, Screw pack, Ground Cable
All mentioned brand names are registered trademarks and property of their owners. Technical specifications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved.
V1.0