FLEXIBLE CLAMP ON SENSOR 9667 < Clamp Sensors < Products Clamp Sensors (Current sensor for Models 3169 and 3196) FLEXIBLE CLAMP ON SENSOR 9667 CAT III 1000V OVERVIEW OPTION DOWNLOAD CATALOG Measure large currents with the PQA 3196 and MEMORY HiCORDER 8860 Series ● ● Lightweight, hollow-coil sensor precludes overheating even when sensing large currents Even flexible enough for complicated wiring Basic specifications Rated input current 5000A to 500A AC 500A to 50A AC Rated output current 500mV AC f.s. (0.1mV AC/A) 500mV AC f.s. (1mV AC/A) Amplitude accuracy ±2.0% rdg. ±1.5mV (45 to 66 Hz, minimum input 10% of range) Phase accuracy ±1 degree (45 to 66 Hz) Max. allowable input Continuous 10000 A AC (45 to 66 Hz) Frequency characteristics 10 Hz to 20 kHz ±3 dB (deviation from accuracy) Max. rated voltage to earth 1000 V AC rms (insulated wire) Core jaw dia. φ 254 mm (10 inch) Power requirement LR03 (AAA) × 4, continuous use 7 days, or AC adapter 9445-02/ 9445-03 Dimensions and mass Sensor: 910 mm (35.83 in) length, Control unit: 57.5W × 86.5H × 30D mm (2.26 in × 3.41 in × 1.18 in), 450 g (15.9 oz), Cord length from sensor to unit: 2m (6.56 ft), Output cord 1 m (3.28 ft) Accessories LR03 (AAA) alkaline batteries × 4 Note: In addition to the Power Quality Analyzer 3196, the 9667 can also be used as a current sensor with Model 3169 and voltage input recorders. Use with these products Generated by www.PDFonFly.com PQA series OVERVIEW MEMORY HiCORDER series OPTION CLAMP ON POWER HiTESTER series DOWNLOAD CATALOG Generated by www.PDFonFly.com