POSIWIRE® WS100M Analog Output ensor for hostile environments and offshore S applications • Protection class IP68/IP69K • Measurement ranges 0 ... 2000 mm to 0 ... 10000 mm • Analog output Specifications Outputs Resolution Linearity Sensing device Material Protection class Connection EMC, temperature Potentiometer 1 kΩ Voltage 0 ... 10 V Current 4 ... 20 mA, 2 or 3 wire Essentially infinite Up to ±0.05 % f. s. Hybrid precision potentiometer Stainless steel; cable: stainless steel IP68/IP69K Cable output, standard length 2 m Refer to output specification Order code WS100M WS100M Model name Measurement range (in mm) 2000 / 3500 / 7500 / 10000 Outputs R1K = Potentiometer 1 kΩ = 0 ... 10 V signal conditioner 10V 420A = 4 ... 20 mA signal conditioner (2 wire) 420T = 4 ... 20 mA signal conditioner (3 wire) Linearity L10 = ±0.10 % option: L05 = ±0.05 % Cable fixing M4VA = M4 cable fixing Connection = Cable output, standard length 2 m KAB2M L25 = ±0.25 % Order example: WS100M - 7500 - 420T - L10 - M4VA - KAB2M 46 CAT-WS-E-09 www.asm-sensor.com ASM GmbH 1.0.0 27 [1.063] 83 [3.268] 133 [5.236] 158 [6.220] 214,7 [8.453] M4 88,9 [3.500] Outline drawing WS100M-2000 / 3500 14 [0.551] POSIWIRE® WS100M Analog Output 175 [6.890] 100 [3.937] 18 [0.709] 150 [5.906] Measurement range 2000 mm Measurement range 3500 mm 100 [3.937] 100 [3.937] 103 [4.055] 35,2 [1.386] 103 [4.055] 25 [0.984] 4x 1 1[ 0 .4 33 ] 35,2 [1.386] 49 [1.929] 49 [1.929] 59,9 [2.358] 33,9 [1.335] 76 [2.992] Dimensions in mm [inch] ASM GmbH www.asm-sensor.com Dimensions informative only. For guaranteed dimensions consult factory. CAT-WS-E-09 47 1.0.0 31 [1.220] 103 [4.055] 153 [6.024] 201 [7.913] 258 [10.146] M4 88,9 [3.500] Outline drawing WS100M-7500 14 [0.551] POSIWIRE® WS100M Analog Output 179 [7.047] 100 [3.937] 18 [0.709] 196 [7.717] 76 [2.992] 103 [4.055] 25 [0.984] 4x 11 [0.4 33] 39,2 [1.543] 53 [2.087] 78,5 [3.091] 146 [5.748] Dimensions in mm [inch] 48 Dimensions informative only. For guaranteed dimensions consult factory. CAT-WS-E-09 www.asm-sensor.com ASM GmbH 1.0.0 31 [1.220] 129 [5.079] 179 [7.047] 253 [9.961] 309,7 [12.193] M4 88,9 [3.500] Outline drawing WS100M-10000 14 [0.551] POSIWIRE® WS100M Analog Output 179 [7.047] 100 [3.937] 18 [0.709] 248 [9.764] 76 [2.992] 103 [4.055] 25 [0.984] 4x 1 1 [0 .433] 39,2 [1.543] 53 [2.087] 106,5 [4.193] 198 [7.795] Dimensions in mm [inch] ASM GmbH www.asm-sensor.com Dimensions informative only. For guaranteed dimensions consult factory. CAT-WS-E-09 49 1.0.0 POSIWIRE® R1K and 10V Analog Output Voltage divider R1K Potentiometer Excitation voltage Potentiometer impedance Thermal coefficient Sensitivity 32 V DC max. at 1 kΩ (max. power 1 W) 1 kΩ ±10 % ±25 x 10-6 / °C f.s. Depends on the measuring range, individual sensitivity of the sensor is specified on the label Approx. 3 % ... 97 % -20 ... +85 °C Voltage divider utilization range Operating temperature Output signals +Vin The metal wiper of the potentiometer must be protected against current load! +Vout Electrical current flow impact on the wiper causes linearity errors and shortens the lifetime of the potentiometer. More information: http://www.asm-sensor.com/asm/pdf/pro/ws_poti_technote_en.pdf GND Signal conditioner 10V and 10V5 Voltage output Excitation voltage Excitation current Output voltage Output current Output load Stability (temperature) Protection Output noise Operating temperature EMC 18 ... 27 V DC non stabilized 20 mA max. 10V: 0 ... 10 V DC; 10V5: 0.5 ... 10 V DC 2 mA max. > 5 kΩ ±50 x 10-6 / °C f.s. Reverse polarity, short circuit 0.5 mVRMS -20 ... +85 °C According EN 61326:2006 Output signals Excitation + 10V Excitation GND Signal + 0 ...10 V Signal GND Signal wiring Signal name R1K 10V +Vin GND +Vout Excitation + + Excitation GND Signal + Signal GND Cable color Connector pin no. White Brown Green Yellow 1 2 3 4 Connection View to sensor connector CONN-M12-8F 58 CAT-WS-E-09 www.asm-sensor.com ASM GmbH 1.0.0 POSIWIRE® 420A and 420T Analog Output Signal conditioner 420A Current output (2 wire) Excitation voltage 12 ... 27 V DC non stabilized, measured at the sensor terminals 35 mA max. 4 ... 20 mA equivalent for 0 ... 100 % range ±100 x 10-6 / °C f.s. Reversed polarity, short circuit 0.5 mVRMS -20 ... +85 °C According to EN 61326:2006 Excitation current Output current Stability (temperature) Protection Output noise Operating temperature EMC Output signals Signal + 420A 4 ...20 mA Signal conditioner 420T Current output (3 wire) Signal – Excitation voltage Excitation current Load resistor Output current Stability (temperature) Protection Output noise Operating temperature EMC 18 ... 27 V DC non stabilized 40 mA max. 350 Ω max. 4 ... 20 mA equivalent for 0 ... 100 % range ±50 x 10-6 / °C f.s. Reverse polarity, short circuit 0.5 mVRMS -20 ... +85 °C According to EN 61326:2006 Output signals Excitation + 420T Signal + 4 ...20 mA Excitation GND Signal wiring Signal name 420A 420T Signal + Signal – Excitation + Excitation GND Signal + Cable color Connector pin no. White Brown Green 1 2 3 Connection View to sensor connector CONN-M12-8F ASM GmbH www.asm-sensor.com CAT-WS-E-09 59 1.0.0