KLU1T041 LF-RevA1-120222

BOTHHAND USA
“LAN-MATE” SERIES
SINGLE RJ45 CONNECTOR MODULE WITH INTEGRATED 10/100 BASE-TX MAGNETICS
P/N: KLU1T041 LF
Page 1/2
Feature
RJ-45 needs to be matched FCC standard.
Complies with requirement of IEEE 802.3u standards.
RJ-45 connector integrated with transformer/impedance
resistor/high voltage capacitor.
Size same as RJ-45 connector to save PCB board space.
Reduced EMI radiation to improve EMI performance.
Design for 100 BASE transmission over UTP-5 cable.
Compliance with ROHS requirements.
Operating temperature range: 0℃ to +70℃.
Storage temperature range: -25℃ to +85℃.
z
z
z
z
z
z
z
z
z
Electrical Specifications @ 25°C
Part
Number
Turns Ratio
OCL (uH Min)
(±5%)
@ 100 KHz/0.1V
TX
with 8mA DC Bias
RX
KLU1T041 LF 1CT:1CT 1CT:1CT
CW/W
L.L
(pF Max)
(uH Max)
28
0.4
350
Insertion Loss
(dB Max)
0.3-100MHz
-1.15
HI-POT
(Vrms)
1500
Continue
Part
Number
KLU1T041 LF
Return Loss
Cross talk
CMR
(dB Min)
(dB Min)
(dB Min)
30MHz 40MHz 50MHz 60MHz 80MHz 0.3-30MHz 30-60MHz 60-100MHz 1-30MHz 30-60MHz 60-125MHz
-16
-14
-13.5
-13
-10
-40
-35
-30
-30
-25
-20
Schematic
www.bothhandusa.com
[email protected]
A1(12/02)
BOTHHAND USA
“LAN-MATE” SERIES
SINGLE RJ45 CONNECTOR MODULE WITH INTEGRATED 10/100 BASE-TX MAGNETICS
P/N: KLU1T041 LF
Page 2/2
Mechanical
1. Plastic Material
: Thermoplastic (UL 94V-0), Black Housing
2. Metal Shield
: Brass, 20u" inches thick Nickel
3. Spring Wire
: Phosphor bronze with selective gold plating
4. Solder Pin
: 0.5x0.35mm, SUS430 with solder Plated
5. Durability
: 750 Mating cycles Min.
PCB Layout Mounting Hole(Top View)
www.bothhandusa.com
[email protected]
A1(12/02)