AWC6344 HELP CDMA AWS/KPCS CDMA Power Amplifier Module TM DATA SHEET- Rev 2.2 FEATURES •HELPTM technology • High Efficiency (RC-1 waveform): • 37 % @ POUT = +28 dBm • 34 % @ POUT = +16.5 dBm AWC6344 • Low Quiescent Current: 12 mA • Low Leakage Current in Shutdown Mode: <5 µA • Internal Voltage Regulator • Integrated “daisy chainable” directional coupler with CPLIN and CPLOUT port • Internal DC blocks on IN/OUT RF ports M45 Package 10 Pin 3 mm x 3 mm x 1 mm Surface Mount Module • Optimized for a 50 Ω System • 1.8 V Control Logic • RoHS Compliant Package, 260 oC MSL-3 APPLICATIONS • Band Class 4, 8 and 15 PRODUCT DESCRIPTION The AWC6344 is a HELP TM product for CDMA devices operating in AWS/KPCS band. This PA incorporates ANADIGICS’ HELPTM technology to deliver exceptional efficiency at low power levels and low quiescent current without the need for external voltage regulators or converters. The device is manufactured using advanced InGaP HBT technology offering state-of-the-art reliability, temperature stability, and ruggedness. Two selectable bias modes that optimize efficiency for different output power levels and a shutdown mode with low leakage current increase handset talk and standby time. A “daisy chainable” directional coupler is integrated in the module, thus eliminating the need of an external coupler. The self-contained 3 mm x 3 mm x 1 mm surface mount package incorporates matching networks optimized for output power, efficiency, and linearity in a 50 Ω system. GND at Slug (pad) VBATT 1 RFIN 2 GND 3 VMODE VEN 11/2012 10 VCC 9 RFOUT 8 CPLIN 4 7 GND 5 6 CPLOUT CPL Bias Control Voltage Regulation Figure 1: Block Diagram AWC6344 VBATT 1 10 RFIN 2 9 RFOUT GND 3 8 CPLIN VMODE 4 7 GND VEN 5 6 CPLOUT Figure 2: Pinout (X-ray Top View) Table 1: Pin Description 2 PIN NAME DESCRIPTION 1 VBATT Battery Voltage 2 RFIN RF Input 3 GND Ground 4 VMODE Mode Control Voltage 5 VEN 6 CPLOUT 7 GND Ground 8 CPLIN Coupler Input 9 RFOUT RF Output 10 VCC PA Enable Voltage Coupler Output Supply Voltage DATA SHEET - Rev 2.2 11/2012 VCC AWC6344 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT Supply Voltage (VCC) 0 +5 V Battery Voltage (VBATT) 0 +6 V Control Voltages (VMODE, VEN) 0 +3.5 V RF Input Power (PIN) - +10 dBm -40 +150 °C Storage Temperature (TSTG) Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT Operating Frequency (f) 1710 - 1785 MHz Supply Voltage (VCC) +3.2 +3.4 +4.35 V POUT < +28 dBm Enable Voltage (VEN) +1.35 0 +1.8 - +3.1 +0.5 V PA "on" PA "shut down" Mode Control Voltage (VMODE) +1.35 0 +1.8 - +3.1 +0.5 V Low Bias Mode High Bias Mode 27.2(1) - 28.0 16.5 - dBm -30 - +90 °C CDMA Output Power HPM LPM Case Temperature (TC) COMMENTS CDMA2000, RC-1 The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. Notes: (1) For Operation at 3.1 V, POUT is derated 0.8 dB. 3 DATA SHEET - Rev 2.2 11/2012 AWC6344 Table 4: Electrical Specifications - CDMA Operation (CDMA2000, RC-1 waveform) (TC = +25 °C, VBATT = VCC = +3.4 V, VENABLE = +1.8 V, 50 Ω system) PARAMETER COMMENTS MIN TYP MAX UNIT 24 17 26.5 20 30 23 dB Adjacent Channel Power at +1.25 MHz offset Primary Channel BW - 1.23 MHz Adjacent Channel BW = 30 kHz - -51 -53 -46 -46 dBc 0V P OUT = +28 dBm POUT = +16.5 dBm 1.8 V Adjacent Channel Power at +1.98 MHz Primary Channel BW=1.23 MHz Adjacent Channel BW=30 kHz - -55 -56 -53 -53 dBc P OUT = +28 dBm 0V POUT = +16.5 dBm 1.8 V 33.5 29 37 34 - % Quiescent Current (Icq) Low Bias Mode - 9 14 mA through VCC pin Mode Control Current - 3.5 4.5 mA through VMODE pin, VMODE = +1.8 V Enable Current - 0.04 0.1 mA through VEN pin BATT Current - 0.8 1.5 mA through VBATT pin, VMODE = +1.8 V Leakage Current - <5 10 µA VBATT = +4.35 V, VCC = +4.35 V VEN = 0 V, VMODE = 0 V Noise Power - -141 -134 -134 -145 -138 - Harmonics 2fo 4fo - -44 -55 -35 -42 dBc Coupling Factor - 20.5 - dB Directivity - 20 - dB Daisy Chain Insertion Loss - 0.25 - dB Spurious Output Level (all spurious outputs) - - -70 dBc 8:1 - - VSWR Gain Efficiency Load mismatch stress with no permanent degradation or failure dBm/Hz Notes: (1) ACLR and Efficiency limits are applied at mid-band. 4 DATA SHEET - Rev 2.2 11/2012 POUT VMODE 0V POUT = +28 dBm POUT = +16.5 dBm 1.8 V POUT = +28 dBm 0V POUT = +16.5 dBm 1.8 V 1.8 V 2110 MHz to 2155 MHz 1805 MHz to 1880 MHz GPS Band ISM Band P OUT ≤ +28 dBm P OUT < +28 dBm, In-Band VSWR <5:1, Out-Of-Band VSWR< 10:1 Applies to all operating conditions Applies over full operating range AWC6344 APPLICATION INFORMATION To ensure proper performance, refer to all related Application Notes on the ANADIGICS web site: http://www.anadigics.com Shutdown Mode The power amplifier may be placed in a shutdown mode by applying logic low levels (see Operating Ranges table) to the VEN and VMODE voltages. The Bias Control table below lists the recommended modes of operation for various applications. Two operating modes are recommended to optimize current consumption. High Bias/High Power operating mode is for POUT levels > 16 dBm. At about 16 dBm, the PA could be switched to Low Power Mode. Bias Modes The power amplifier may be placed in either Low or High Bias modes by applying the appropriate logic level (see Operating Ranges table) to the VMODE pin. Table 5: Bias Control POUT LEVELS BIAS MODE VEN VMODE VCC VBATT Low power +16 dBm Low +1.8 V +1.8 V 3.2 - 4.35 V > 3.2 V High power > +16 dBm High +1.8 V 0V 3.2 - 4.35 V > 3.2 V - Shutdown 0V 0V 3.2 - 4.35 V > 3.2 V APPLICATION Shutdown VBATT VCC C5 2.2 µF C1 0.1µF GND at slug 1 2 RFIN 3 VMODE VEN VBATT VCC RFIN RFOUT GND 4 VMODE 5 VEN 10 9 CPLIN 8 GND 7 CPLOUT 6 Figure 3: Evaluation Board Schematic 5 DATA SHEET - Rev 2.2 11/2012 C3 33pF C2 0.1µF C4 2.2µF ceramic RFOUT CPLIN CPLOUT AWC6344 PACKAGE OUTLINE Figure 4: M45 Package Outline - 10 Pin 3 mm x 3 mm x 1 mm Surface Mount Module Pin 1 Identifier Date Code YY= Year WW = Work Week 6344 LLLLNN YYWWCC Part Number Lot Number Country Code(CC) Figure 5: Branding Specification - M45 Package 6 DATA SHEET - Rev 2.2 11/2012 AWC6344 COMPONENT PACKAGING Pin 1 Figure 6: Tape & Reel Packaging Table 6: Tape & Reel Dimensions 7 PACKAGE TYPE TAPE WIDTH POCKET PITCH REEL CAPACITY MAX REEL DIA 3 mm x 3 mm x 1 mm 12 mm 4 mm 2500 7" DATA SHEET - Rev 2.2 11/2012 AWC6344 ORDERING INFORMATION ORDER NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION AWC6344Q7 -30 oC to +90 oC RoHS Compliant 10 Pin 3 mm x 3 mm x 1 mm Tape and Reel, 2500 pieces per Reel Surface Mount Module AWC6344P9 -30 oC to +90 oC RoHS Compliant 10 Pin 3 mm x 3 mm x 1 mm Partial Tape and Reel Surface Mount Module COMPONENT PACKAGING ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. warning ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 8 DATA SHEET - Rev 2.2 11/2012