ACU50752 CATV/TV/Cable Modem Upconverter MMIC Data Sheet - Rev 2.2 FEATURES • • • • • • • • • • • • • Integrated Monolithic Upconverter Compatible with all digital and analog modulation types 5 Volt Operation Low Power Consumption Low Noise Figure High Conversion Gain Low Distortion Excellent Oscillator Purity and Phase Noise Remote Shutdown Feature Small Size Low Cost High Reliability RoHS-Compliant Package Option S3 Package Modified 16 Pin SOIC PRODUCT DESCRIPTION The ACU50752 is a Monolithic GaAs IC designed to perform the upconverter functions in a double conversion tuner: gain block, local oscillator and balanced mixer. The specifications meet the requirements of CATV, TV and Cable Modem applications. Offered in a modified 16-lead SOIC package and requiring only a single polarity 5 V supply (or 3.5 V, with slightly reduced performance), the IC is well suited for applications where small size, low cost, low auxiliary parts count and a no-compromise performance is important. It provides tuner manufacturers the opportunity to reduce cost by lowering the component count and decreasing the amount of labor-intensive production alignment steps, while significantly improving performance and reliability. IF 1, +V DD 1 16 IF2, +V DD MXR 15 GND GND 2 Shut Down/ Current Adjust 3 14 OSC OUT +90 - 90 PHASE SPLITTER 4 GND 13 GND 12 5 RF IN LOW NOISE AMP 6 OSC 11 T CKT RIN Inductor 7 10 VDDLO GND 8 9 * Varactor return. Do not connect to common ground Figure 1: Functional Block Diagram 04/2012 GND* ACU50752 Table 1: Pin Description PIN 2 NAME DESCRIPTION PIN NAME DESCRIPTION 1 IF1, VDDIF Balanced IFoutput and supply 9 VCRTN Varactor return 2 GND Ground 10 V D D LO Oscillator supply 3 VBIAS Shut down/current adjust 11 Tank Oscillator tank circuit 4 GND Ground 12 GND Ground 5 GND Ground 13 GND Ground 6 RFIN RFInput 14 OSCOUT Oscillator output to Prescalar 7 IBIAS Current Bias 15 GND Ground 8 GND Ground 16 IF2, VDDIF Balanced IF output and supply Data Sheet - Rev 2.2 04/2012 ACU50752 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT VDDIF,VDDLO,VOSC (Pins 1,10,14 & 16) 0 9 VD C VRF/VTUNE (Pins 6 & 11) - 0 VD C RF Input Voltage - +60 dBmV - 55 +200 °C Soldering Temperature - 260 °C Soldering Time - 5 S e c. Storage Temperature Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER MIN TYP MAX 50 900 950 - 860 1200 2060 VDDIF 4.75 5 5.25 VD C V D D LO 4.75 5 5.25 VD C - -2 - V Tuning Voltage 1.5 - 27 V Operating Case Temperature -40 - +85 Frequency Shutdown Voltage (Pin 3) RF IF LO UNIT MHz C O The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. Data Sheet - Rev 2.2 04/2012 3 ACU50752 Table 4: Electrical Specifications (TA = 25 oC; VDDIF, VDDLO =+ 5V; RF = 50 to 860 MHz; IF = 1170 MHz) PARAMETER MIN TYP MAX UNIT 5.0 8.0 - dB Gain Flatness(1) - 1.0 - dB SSB Noise Figure(1) - 6.5 8.0 dB CSO(2) - -60 -57 dB c CTB(2) - -60 -57 dB c Cross Modulation(3) - -62 -60 dB c 2-Tone 2nd Order Input IP(4) - 40 - dB m 2-Tone 3rd Order Input IP(4) - 18 - dB m LO Phase Noise(5) - -84 -81 dBc/Hz -10 -5 - dB m LO to RF Leakage - -22 - dB m LO to IF Leakage - -24 - dB m RF to IF Isolation 40 50 - dB Tuning Voltage(1) 1.0 - 22 V IDDIF - 58 80 mA IDDLO - 60 80 mA Power Consumption - 600 800 mW Conversion Gain(1) LO Power to Prescaler Notes: (1) As measured in ANADIGICS test fixture (2) 128 Channels @ + 7 dBmV (3) 128 Channels, 99 % Modulation @ 15 KHz (4) Two tones @ -15 dBm each (5) At 10 KHz offset 4 Data Sheet - Rev 2.2 04/2012 ACU50752 5 V DC (V DD Mixer) 0.01 uF 3.3 uH 3.3 uH 100 pF IF OUT 100 pF BALUN 1:1 16 1 2 3 0.01 uF 4 RG 5 RF IN 6 0.01 uF 3.3uH ACU 50752 shut down/ * current adjust * 15 OSC OUT (To prescaler) 14 100 pF 13 12KΩ 12 11 7 10 8 9 9.1 pF 68 nH 51 Ω 0.01µ F ISV245 Vtune .1 uF 5 V DC (V DD Osc.) L 0.01 uF 330 uF TAN RI Figure 2: Test Circuit Schematic Notes: L RG RI * = = = = Printed inductor (2~3 nH) Gain control/impedance match resistor (240Ω for 8 dB gain) Current adjust resistor (2.7 W for 60 mA mixer current) Apply -2 V DC for shutdown, 0< VDC < 0.3 for 60 mA mixer current Data Sheet - Rev 2.2 04/2012 5 ACU50752 PACKAGE OUTLINE Figure 3: S3 Package Outline - Modified 16 Pin SOIC 6 Data Sheet - Rev 2.2 04/2012 ACU50752 NOTES Data Sheet - Rev 2.2 04/2012 7 ACU50752 ORDERING INFORMATION ORDER NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION COMPONENT PACKAGING ACU50752S3CT -40°C to +85°C RoHS Compliant Modified16 Pin SOIC Tape & Reel, 3500 pieces per reel ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: [email protected] IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 8 Data Sheet - Rev 2.2 04/2012