Electrical-optical characteristics: (Ta=25°C) (Test Condition

SMD INFRARED EMITTING DIODES
BL-LS3528A0S1IR







Features:
3.5mmx2.8mm SMD, 1.9mm THICKNESS PLCC2 package, Infrared LED
High Reliability
Peak Wavelength at 940, 880, 850nm
Water Clear, yellow Transparent, Blue Transparent available
IC compatible /Low current capability.
PACKAGE: 2KPCS/REEL.
RoHs Compliance






Applications:
Free air transmission system
Infrared remote control units with high power requirement
Smoke detector
Infrared Camera
Infrared applied system

Electrical-optical characteristics: (Ta=25°C)
(Test Condition: IF=50mA)
Chip
Part Number
Lens Type
∆λ
Ir
(Vr=5
V,
uA)
Forward
Voltage(VF)
Unit:V
Radiant
Power
(mw/sr)
Material
P
(nm)
Typ
Max
Typ
BL-LS3528A0S1IRAC
GaAs
940
Water Clear
50
10
1.40
1.60
30
BL-LS3528A0S1IRAB
GaAs
940
Blue Trans.
50
10
1.40
1.60
30
BL-LS3528A0S1IRBC
GaAlAs
880
Water Clear
50
10
1.70
2.00
30
BL-LS3528A0S1IRBB
GaAlAs
880
Blue Trans.
50
10
1.70
2.00
30
BL-LS3528A0S1IRCC
GaAlAs
850
Water Clear
50
10
1.70
2.00
50
BL-LS3528A0S1IRCB
GaAlAs
850
Blue Trans.
50
10
1.70
2.00
50
BL-LS3528A0S1IRCY
GaAlAs
850
Yellow Trans.
50
10
1.70
2.00
50

Viewi
ng
Angle
2θ1/2
(deg)
120
Absolute maximum ratings (Ta=25°C)
Parameter
Rating
Unit
50
160
5
mW
Forward Current IF
Power Dissipation Pd
Reverse Voltage VR
Peak Forward Current IPF
(Duty 1/10 @1KHZ)
Operation Temperature TOPR
250
mA
-40 to +100
°C
Storage Temperature TSTG
-40 to +100
°C
Max.260±5°C for 3 sec Max.
(1.6mm from the base of the epoxy bulb)
°C
Lead Soldering Temperature
TSOL
APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS
REV NO: V.2
Page 1 of 4
WWW.BETLUX.COM
EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM
mA
V
SMD INFRARED EMITTING DIODES
BL-LS3528A0S1IR

Package configuration & Internal circuit diagram
Notes:
1. All dimensions are in millimeters (inches)
2. Tolerance is ±0.25(0.01")unless otherwise noted.
3. Specifications are subject to change without notice.
APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS
REV NO: V.2
Page 2 of 4
WWW.BETLUX.COM
EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM
SMD INFRARED EMITTING DIODES
BL-LS3528A0S1IR
 Tape Specifications
Smt Reflow Solding Instructions
Number of reflow process shall be less than 2 times
and cooling process to normai temperature is required
between first and second soldering process
Recommended Soldering Pattern
(Units:mm)
Tape Specifications
(Units:mm)
APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS
REV NO: V.2
Page 3 of 4
WWW.BETLUX.COM
EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM
SMD INFRARED EMITTING DIODES
BL-LS3528A0S1IR

Packing and weighting
2000pcs/Reel
1 Reel/Bag
Maximum
10
Bags/Inner Box
3 Inner
Box/Box
9 Inner
Box/Box
APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS
REV NO: V.2
Page 4 of 4
WWW.BETLUX.COM
EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM