® Electrocomponents Series 220 Data Sheet Rotary DIP Switch 7x7mm Miniature Rotary DIP Switch Features Optimized Mechanical Features • Robust metal bracket design • Standard through hole and surface mount gull-wing terminal configurations • Binary Coded Decimal, Hexadecimal code and Single pole output • Clockwise or counterclockwise rotation Optimized Contact System • Robust wiping contact • Precise detents Materials • Gold plated beryllium copper contacts • Tin coated terminals for better solderability • High temperature materials (UL94V-0) • RoHS compliant Electrical and Mechanical Specifications Switch Options 4,10,16 positions Operating Temperature - 40°C to +85°C Output Binary Coded Decimal Hexadecimal Code Single Pole Rotational Torque 40~200 gf-cm Switch Contact Resistance 100 milliohms maximum Insulation Resistance 1000 Mohms minimum between insulated terminals Dielectric Strength 250 VAC for 1 minute between adjacent terminals Actuation Life 10,000 steps Allowable Solder Time Reflow soldering up to 5 seconds at 260°C max. Wave soldering up to 10 seconds at 260°C max. Manual soldering up to 4 seconds at 350°C max. Packaging Standard : Anti-static tube packaging Optional : Tape and reel packaging Maximum Rating 100 mA -50 VDC Minimum Load 1 µA 20m VDC 1-4 CTS Electrocomponents © 2015 CTS Corporation. All rights reserved. Information subject to change. 9/16/15 www.ctscorp.com CTS SERIES 220AM_10,16R - Surface Mount Gull Wing, 10 and 16 Position CODE TABLE 0.15 7.20 3.80 7.20 0.70W x 2.75L x 1.05D 9.50 PCB LAYOUT 2.54 6-1.00 3.00 2.54 DIMENSION : mm STANDARD TOLERANCE : .XX (2 PLACE) : ±0.30 Dot indicates terminal to common connection. All switches are continuous rotation. 10.50 10 Position - Numbered 0 through 9 16 Position - Numbered 0 through F CTS SERIES 220AD_10,16 - Standard Through Hole, 10 and 16 Position ² 0.10 2.15 0.60 CODE TABLE 3.50 ² 0.50 3.65 7.20 3.00 1.20 7.20 2.50 Ø 3.00 6-0.50 0.15 ² 0.50 2.54 2.54 ² 0.10 2.54 ² 0.10 7.62 2.54 DIMENSION : mm STANDARD TOLERANCE : .XX (2 PLACE) : ±0.30 7.62 ² 0.15 +0.10 6- Ø 0.80 - 0 HOLES Dot indicates terminal to common connection. All switches are continuous rotation. 10 Position - Numbered 0 through 9 16 Position - Numbered 0 through F 2-4 CTS Electrocomponents © 2015 CTS Corporation. All rights reserved. Information subject to change. 9/16/15 www.ctscorp.com CTS SERIES 220AM_04R - Surface Mount Gull Wing, 4 Position CODE TABLE PCB LAYOUT 3.00 7.20 2.54 7.20 2.54 6-1.00 0.70Wx2.75Lx1.05D Dot indicates terminal to common connection. All switches are continuous rotation. 10.50 4 Position - Single pole 0.15 3.80 DIMENSION : mm STANDARD TOLERANCE : .XX (2 PLACE) : ±0.30 9.50 CTS SERIES 220AD_04 - Standard Through Hole, 4 Position CODE TABLE PCB LAYOUT 2.54 ² 0.10 7.20 2.54 ² 0.10 7.20 7.62 +0.10 6- Ø 0.80 - 0 HOLES ² 0.15 Dot indicates terminal to common connection. All switches are continuous rotation. 4 Position - Single pole Ø 3.00 ² 0.10 0.60 3.65 2.50 3.00 1.20 2.15 3 . 50 ² 0.50 DIMENSION : mm STANDARD TOLERANCE : .XX (2 PLACE) : ±0.30 0.15 7.62 3-4 CTS Electrocomponents ² 0.50 6-0.50 2.54 2.54 © 2015 CTS Corporation. All rights reserved. Information subject to change. 9 /16/15 www.ctscorp.com Ø 3.00 Ø 3.20 Actuator Options Ø3.20 Ø3.00 0.60 0.70 3. 0 0 2.50 1.20 Ø 3.00 4.50 1 . 05 B: KNURLED, SLOTTED, FLATTED SHAFT A: FLUSH ARROW ROTOR Ø3.20 2.15 C: KNURLED, SLOTTED SHAFT DIMENSION : mm STANDARD TOLERANCE : .XX (2 PLACE) : ±0.30 Position Options 04: 4 POSITIONS 10: 10 POSITIONS 16: 16 POSITIONS Ordering Information 220 – AM A 04 R BLANK : TUBE PACKAGING R : TAPE & REEL PACKAGING (SURFACE MOUNT ONLY) AM : SURFACE MOUNT GULL WING, 3.8MM HEIGHT AD : STANDARD THROUGH HOLE, 3.6MM HEIGHT 04: 4 POSITIONS 10: 10 POSITIONS 16: 16 POSITIONS A: FLUSH ARROW ROTOR B: KNURLED, SLOTTED, FLATTED SHAFT C: KNURLED, SLOTTED SHAFT 4-4 CTS Electrocomponents © 2015 CTS Corporation. All rights reserved. Information subject to change. 9/16/15 www.ctscorp.com