Series 576 Data Sheet ® Electrocomponents Acceleration Module Industrial Conductive Plastic Precision Rotary Sensor Features • Robust Construction • Precision Center Voltage • Center Return Mechanism • 2 Million Cycle Life • Flexible Mechanical Installation • Water Resistance (IP64) • RoHS Compliant Electrical and Mechanical Specifications Overall Resistance 5 K ohms Push-Pull Strength of Shaft 12.7 kg for 10 seconds Resistance Tolerance ± 10%, ± 20% Mounting Information 2-Ear , 4-Ear Mounting Power Rating 0.2 watts @ 40°C Rotational life 2 Million Cycles Dielectric Strength 500 VDC for 1 minute Temperature Operating: -10°C to 85°C Storage: -40°C to 125°C Operating Voltage Typical : 5 VDC Insulation Resistance 1000 Megohms minimum @ 500 VDC Connection Mechanism Flatted Shaft, Drive Plate Stop Strength 100 kgf-cm max. 1-4 CTS Electrocomponents Solder Heat Resistance 350°C for 5 seconds Water Resistance IP64 Starting Torque Standard : 1.7kgf-cm Special : 3.0kgf-cm © 2010 CTS Corporation. All rights reserved. Information subject to change. 06/01/10 www.ctscorp.com 576D Drive Plate Pointing away from Mounting Plate, 2-Ear Mounting, Solder Lug Terminal Ø20.0 24.8 15.3 15.25 7.0 5.0 8.0 24.1 26.0 MOUNTING PLATE 11.5 5.75 M4 X 0.7 THD.(2) 20.0 16.0 DRIVE PLATE 36.4 0.5 TYP. 18.3 6.0 Ø7.5 C’BORE 3.0 DP. (2) 54.5 THRU. HOLE Ø4.5(2) 40.0 60 ° R14.0 R7.3(2) Ø 6.35 GND 16.0 A B C 10.0 CENT. 23.0 INPUT 5KOhm ±10% A C 4.9(3) 3.0 (3) OUTPUT B 576D Stainless Shaft with Stop Plate, 2-Ear Mounting, Solder Lug Terminal Ø20.0 “L” 15.3 15.25 7.0 6.6 5.0 24.1 26.0 MOUNTING PLATE STOP PLATE “L” 0.5 TYP. 6.0 54.5 THRU. HOLE Ø4.5(2) 40.0 60 ° R14.0 R7.3(2) Ø6.35 16.0 A B C 10.0 CENT. Ø7.5 C’BORE 3.0 DP. (2) 4.9(3) 3.0 (3) 23.0 GND 5KOhm ±10% A INPUT C OUTPUT B 2-4 CTS Electrocomponents © 2010 CTS Corporation. All rights reserved. Information subject to change. 06/01/10 www.ctscorp.com 576Q Drive Plate Pointing toward Mounting Plate, 4-Ear Mounting, Solder Lug Terminal Ø20.0 GND 5KOhm INPUT ±10% A MOUNTING PLATE DRIVE PLATE C 12.0 6.5 M4 X 0.7 THD. (2) OUTPUT 20.0 B 30.0 33.0 R5.5 (4) 40° Ø6.0 C'BORE 9.3 25.2 3.0 DP. (4) 21.6 . 6.0 THRU.HOLE Ø3.0 (4) 10.4 13.0 0.4 (3) 33.0 11.5 (3) 24.1 5.00 R7.5 26.0 4.9 (3) A B C 3.0 (3) 0.5 TYP. 10.0 CENT. Resistance Tapers 576D (2-Ear Mounting) 576Q (4-Ear Mounting) Center Point 5 4 4 3 Voltage Voltage Center Point 5 2.5 2 1 0 3 2.5 2 1 0 10 20 30 40 50 60 0 0 10 Dead Zone 8° 3- 4 CTS Electrocomponents 20 Effective Electrical Angle 45° Effective Electrical Angle 34° Angle of Rotation Angle of Rotation © 2010 CTS Corporation. All rights reserved. Information subject to change. 30 40 Dead Zone 8° 06/01/10 www.ctscorp.com Ordering Information 576 D MOUNTING EAR D - 2-Ear Q - 4-Ear 1 D SHAFT LENGTH “L” DRIVE PLATE DIRECTION Drive Plate Style D - Default Shaft Length T - Toward Mounting Plate (4-Ear only) Stop Plate Style 1 - 30 mm 2 - 40 mm 3 - 50 mm A A S STARTING TORQUE S - Standard (1.7 kgf-cm) A - Away from Mounting Plate ( 2-Ear only) N - N/A (Stop Plate) RESIST TOL DRIVE PLATE MOUNTING HOLE PITCH A: ± 10% B: ± 20% 1 - 20 mm N - N/A ( Stop Plate) Please consult factory for other mounting options or custom features not listed. 4-4 CTS Electrocomponents © 2010 CTS Corporation. All rights reserved. Information subject to change. 06/01/10 www.ctscorp.com