® Electrocomponents Series 223F Data Sheet Tactile Switch 4.1 x 4.1mm Compact Tactile Switch Features Optimized Mechanical Features • Surface mount J bend terminal configuration • Compatible with IR reflow and manual soldering Optimized Contact System • Excellent tactile feedback Materials • Silver coated terminals for better solderability • High temperature materials (UL94V-0) • RoHS compliant Electrical and Mechanical Specifications Switch Contact Resistance 100 milliohms maximum Storage Temperature - 40°C to +85°C Insulation Resistance 100 Megohms minimum between terminals Push Strength 5 Kgf maximum Maximum Rating 50 mA -12 VDC Actuation Life 1,000,000 cycles Dielectric Strength 250 VAC for 1 minute between adjacent terminals Allowable Solder Time IR Reflow: Up to 5 seconds at 260°C. Manual soldering: Up to 3 seconds at 350°C Operating Force 160gf Travel 0.2 mm Packaging Standard: Tape and reel packaging with 330mm diameter reel and 12mm wide plastic tape Operating Temperature - 40°C to +85°C 1-2 CTS Electrocomponents © 2015 CTS Corporation. All rights reserved. Information subject to change. 8/11/15 www.ctscorp.com CTS SERIES 223FJVA... - Surface Mount J Bend, Flat Surface 0.2 2.4 3 4 0.8 SR0.8 4.1 2 2.9 1 0.6 90 ° 3° 2.85 RECOMMENDED SHAPE OF KEYING TIP RESTRICTION IN OPERATION 4.7 ±0.1 3.7 ±0.1 4.1 1.4 ±0.1 0.35 1 2 3 4 2 2.2 ±0.1 insulator 0.25 1 3.6 ±0.1 4.0 ±0.1 4.3 4 3 PCB MOUNTING SURFACE Do not place circuit in this area. DIMENSION : mm STANDARD TOLERANCE : .X (1 PLACE) : ±0.20 CIRCUIT DIAGRAM PCB LAYOUT Ordering Information 223F – J V A A R Packaging R : TAPE & REEL PACKAGING Actuator Force A:160 gf Termination J : SURFACE MOUNT J BEND !!!Note: Actuating Direction V: VERTICAL 2-2 CTS Electrocomponents Actuator Height A: 0.35mm Consult CTS for other common features not listed. © 2015 CTS Corporation. All rights reserved. Information subject to change. 8/11/15 www.ctscorp.com