® Electrocomponents Series 223E Data Sheet Tactile Switch 4.2 x 3.2mm Compact Tactile Switch Features Optimized Mechanical Features • Surface mount J bend terminal configuration • Compatible with IR reflow and manual soldering • Variety of operating force options Optimized Contact System • Excellent tactile feedback Materials • Silver coated terminals for better solderability • High temperature materials (UL94V-0) • RoHS compliant Electrical and Mechanical Specifications Switch Contact Resistance 500 milliohms maximum Storage Temperature - 40°C to +85°C Insulation Resistance 100 Megohms minimum between terminals Actuator Strength 3 Kgf maximum Maximum Rating 50 mA -16 VDC Actuation Life 160 gf: 100,000 cycles 260 gf: 50,000 cycles Dielectric Strength 250 VAC for 1 minute between adjacent terminals Operating Force 160 or 260gf Travel 0.2 mm Allowable Solder Time IR Reflow: Up to 5 seconds at 260°C. Manual soldering: Up to 3 seconds at 350°C Packaging Standard: Tape and reel packaging with 330mm diameter reel and 12mm wide plastic tape Operating Temperature - 40°C to +85°C 1-2 CTS Electrocomponents © 2015 CTS Corporation. All rights reserved. Information subject to change. 8/1/15 www.ctscorp.com CTS SERIES 223EJ - Surface Mount J Bend Terminal 3 4 2.2 3.2 2 1 1.5 2.8 2 1.6 2.7 1 3 4 3.1 5.2 4.2 CIRCUIT DIAGRAM PCB LAYOUT 0.5 1.6 1.8 2.5 3.0 1 2 3 4 DIMENSION : mm STANDARD TOLERANCE : .X (1 PLACE) : ±0.2 PCB MOUNTING SURFACE 4.6 Ordering Information 223E – J Termination J : SURFACE MOUNT J BEND V A A R Packaging R : TAPE & REEL PACKAGING Actuator Force A:160 gf B: 260 gf !!!Note: Actuating Direction V: VERTICAL 2 -2 CTS Electrocomponents Actuator Height A: 2.5mm Consult CTS for other common features not listed. © 2015 CTS Corporation. All rights reserved. Information subject to change. 8/1/15 www.ctscorp.com