CER0032A 1575.42 MHz GPS BPF Features • Low Loss • High Rejection • Small Size Description Surface mount, silver (Ag) coated, ceramic filter. Developed for use in subscriber GPS L1 Applications. Weight: 0.17 grams typical Material: Filter is composed of a ceramic block plated with Ag. Filter complies with RoHS standards. Electrical Specifications Parameter Passband Insertion Loss Passband Return Loss Passband Ripple Attenuation Frequency (MHz) 1573.42 – 1577.42 1573.42 – 1577.42 1573.42 – 1577.42 824 – 849 1850 – 1910 1710 – 1785 2400 – 2484 Spec. over Typical @ 25ºC -40ºC to +85ºC 1.25 dB 1.5dB max 15.0 dB 11 dB min 0.1 dB 0.5 dB max 67.0 dB 50 dB min 53.0 dB 45 dB min 27.0 dB 20 dB min 50.0 dB 20 dB min Note: Supplier shall test each filter to the critical electrical specifications of the above table. Any subsequent audits may deviate from in value due to measurement repeatability among different test systems. Such deviations shall not exceed the following limits: Specification Allowance Insertion Loss 0.1 dB Return Loss 1.0 dB Stopbands 1.0 dB Document No. 008-0256-0 Page 1 of 2 Rev. X4VH ٠ CTS Electronic Components ٠ www.ctscorp.com ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠ CER0032A 1575.42 MHz GPS BPF Mechanical Drawing Dim Nominal (mm) Tolerance (mm) +/- or max 4.0 max 0.53 2.9 0.13 0.13 0.51 0.25 0.51 0.51 4.2 2.0 0.51 0.13 0.13 0.13 0.13 max max 0.13 A B C D E F G H I J L M R 0.154 0.141 0.144 0.127 0.124 0.103 0.104 0.084 0.102 0.071 0.051 0.053 0.050 0.027 0.030 0.013 0.000 PCB Layout 0.010 Electrical response 0.154 0.152 0.136 0.112 0.106 0.102 0.076 0.066 0.040 0.030 0.0000 0.078 0.074 -0.004 Filter Outline Solderresist Over Dielectric Exposed Conductor Solder Resist Over Conductor Packaging and Marking DIMENSION UNITS REEL DIAMETER REEL WEIGHT REEL QUANTITY SPECIFICATION mm kg Ea. Document No. 008-0256-0 178 0.45 500 Page 2 of 2 Rev. X4VH ٠ CTS Electronic Components ٠ www.ctscorp.com ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠