Model 443 - CTS Corp.

Model 443
Surface Mount Quartz Crystal
FEATURES
• Standard 3.2mm x 2.5mm Glass Seal Package
• Fundamental Crystal Design
• Frequency Range 12 – 50 MHz
• Frequency Tolerance, ±20 ppm Standard [other tolerances available]
• Frequency Stability, ±30 ppm Standard [other stabilities available]
• Operating Temperature to -40°C to +85°C
• Tape & Reel Packaging Standard, EIA-481
• RoHS Compliant in Accordance with EU Directive 2011/65/EU
- Lead-Free Termination Finish
- Exemption 7(c)-I, Electrical and electronic components containing lead [Pb] in glass
APPLICATIONS
Model 443 is a low cost device used in a wide range of commercial applications including
notebooks, computer peripherals, audio visual, Bluetooth and USB interfaces, PDAs, and automotive electronics.
ORDERING INFORMATION
443
M
OPERATING TEMPERATURE RANGE
FREQUENCY IN MHz
W = 0°C to +50°C
A = -10°C to +60°C
C = -20°C to +70°C [standard]
I = -40°C to +85°C [standard]
M - indicates MHz and decimal point. 3
LOAD CAPACITANCE
A = 10 pF
B = 13 pF
C = 16 pF
D = 18 pF
FREQUENCY TOLERANCE @ 25°C
1 = ± 10 ppm
2 = ± 20 ppm [standard]
3 = ± 30 ppm
E = 20 pF
J = 9 pF
K = 8 pF
L = 12 pF
T = 6 pF
S = Series
STABILITY OVER TEMPERATURE
X = ± 15 ppm 1
2 = ± 20 ppm 2
3 = ± 30 ppm [std]
5 = ± 50 ppm
1] Only available with temperature range codes "W" and "A".
2] Only available with temperature range codes "W", "A" and "C".
3] Frequency is recorded with two leading digits before the ‘M’ and 5 significant digits after the ‘M’ (including zeros).
Not all performance combinations and frequencies may be available.
Contact your local CTS Representative or CTS Customer Service for availability.
PACKAGING INFORMATION [Reference]
Factory may package reels in quantities of 1k pcs. or 3k pcs. Reel size is 180mm.
Document No. 008-0373-0
Page 1- 2
www.ctscorp.com
Rev. B
Model 443
Quartz Crystal
ELECTRICAL PARAMETERS
ELECTRICAL CHARACTERISTICS
VALUE
12 MHz to 50 MHz
Fundamental
AT-Cut
±10 ppm, ±20 ppm, ±30 ppm
±15 ppm, ±20 ppm
±30 ppm, ±50 ppm
0°C to +50°C
-10°C to +60°C
-20°C to +70°C
-40°C to +85°C
12 MHz - < 13 MHz
100 Ohms
13 MHz - < 20 MHz
80 Ohms
20 MHz - < 48 MHz
60 Ohms
See Ordering Information
5.0 pF Typical, 7.0 pF Maximum
10 µW Typ., 100 µW Max.
±3 ppm/yr Typical
500M Ohms @ DC 100V
-40°C to +85°C
PARAMETER
Frequency Range
Operating Mode
Crystal Cut
Frequency Tolerance @ +25°C
Frequency Stability Tolerance
(Operating Temperature Range, Referenced to 25°C Reading)
Operating Temperature Ranges
Equivalent Series Resistance [Maximum]
Load Capacitance or Resonance Mode
Shunt Capacitance (C0)
Drive Level
Aging @ +25°C
Insulation Resistance
Storage Temperature Range
MECHANICAL SPECIFICATIONS
MARKING INFORMATION
1. M443 - CTS Model Series.
2. C – CTS.
3. D – Date code. See Table I for codes.
4. XXX – Frequency code. Reference CTS document 016-1454-01.
PACKAGE DRAWING
M443
CDXXX
NOTES
1. Complete CTS part number, frequency value, date code and
manufacturing site code information must appear on reel and
carton labels.
2. Termination pads (e4); barrier plating is nickel [Ni] with gold
[Au] flash plate.
3. Reflow conditions per JEDEC J-STD-020; 260°C maximum, 10
seconds.
4. MSL = 1.
SUGGESTED SOLDER PAD GEOMETRY
TABLE I – DATE CODE
MONTH
JAN
YEAR
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
M
2001
2005
2009
2013
2017
A
B
C
D
E
F
G
H
J
K
L
2002
2006
2010
2014
2018
N
P
Q
R
S
T
U
V
W
X
Y
Z
2003
2007
2011
2015
2019
a
b
c
d
e
f
g
h
j
k
l
m
2004
2008
2012
2016
2020
n
p
q
r
s
t
u
v
w
x
y
z
Document No. 008-0373-0
Page 2 - 2
Rev. B