RC Series 3000 Technical Data Features • Integrated Resistor and Capacitor Network Excellent high frequency performance Slim BGA Package 1% Resistor Tolerance Dense packaging solution Significantly reduces component placements • • • • • Description This Resistor/Capacitor terminator network provides high performance termination. Designed with a ceramic substrate, this device virtually eliminates channel capacitance, a primary cause of reduced system performance. In addition, the BGA package eases routing design, saving the designer many hours of printed circuit layout. 4 3 3 C1 C1 C1 C1 C1 C1 C1 C1 C1 C1 C1 C1 C1 C1 C1 C1 C1 C1 C1 2 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 1 R1 R1 R1 R1 R1 R1 R1 R1 B C D E F G H J A B C Style J D E F G H C1 C1 C1 C1 C1 C1 C1 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 2 1 A C1 3 2 J 1 A Style K B C D E F G H J Style L Ordering Information 1.27mm Pitch Part Number 1.00mm Pitch Part Number Style Ball Grid Array Size R1 Ω Tolerance R1 C1 Cap Tolerance Dielectric DF RC3002B6 RC3005B6 RC3007B6 RC3008B6 RC3010B6 RC3002B7 K L J J L 3x9 4x9 3x9 3x9 4x9 50 50 50 50 100 ±1% ±1% ±1% ±1% ±1% 0.1uf 0.1uf 100pf 33pf 0.1uf ±10% ±10% ±10% ±10% ±10% X5R X5R NPO NPO X5R 5% max 5% max 2.5% max 2.5% max 5% max (Tape and reel packaging information is shown on page 2) CTS Electronic Components www.ctscorp.com © 2005 CTS Corporation. All rights reserved. Information subject to change. Page 1 RC Series 3000 Technical Data 5/3/2007 Mechanical Diagrams Recommended Land Pattern Outline of Substrate L H W RC3___B_ CTSDATE P A1 Identifier Solder Mask Dia = Pad Diameter +.15mm (.006 inch) PCB Pad Diameter 1.00mm Pitch (B7) = 0.51mm/.020 inch (minimum) 1.27mm pitch (B6) = 0.64mm/.025 inch (minimum) K For .006" Thick Solder Paste Stencil, Aperture Opening Should be Equal to the PCB Pad Diameter. ØD P(Pitch) Refer to www.ctscorp.com/resistor for Land Pattern Library 1.27mm Pitch mm RC3002B6 inch mm RC3005B6 RC3010B6 inch mm RC3007B6 RC3008B6 inch 1.0mm Pitch mm RC3002B7 inch L 11.43±0.15 .450±.006 11.43±0.15 .450±.006 11.43±0.15 .450±.006 L 9.64±0.15 .380±.006 W 3.81±0.15 .150±.006 5.08±0.15 .200±.006 3.81±0.15 .150±.006 W 3.64±0.15 .143±.006 H 2.03 max .080 max 2.03 max .080 max 2.03 max .080 max H 1.83 max .072 max P 1.27±0.25 .050±.010 1.27±0.25 .050±.010 1.27±0.25 .050±.010 P 1.00±0.25 .039±.010 Electrical Specifications Resistor Tolerance: TCR Operating Temperature Range Maximum Resistor Power: ± 1.0% ± 200ppm/°C -55°C to +125°C (with NPO capacitors) -55°C to +85°C (with X5R capacitors) 0.05 Watts min. at 70°C (Not to exceed total package power) Maximum Package Power: Maximum Processing Temperature: Note: D 0.76±0.05 .030±.002 0.76±0.05 .030±.002 0.76±0.05 .030±.002 D 0.64±0.05 .025±.002 K 1.02±0.25 .043±.010 1.02±0.25 .040±.010 1.02±0.25 .040±.010 K 0.82±0.25 .033±.010 Coplanarity 0.15 .006 0.15 .006 0.15 .006 Coplanarity 0.15 .006 Packaging Information Suffix Tape Width Carrier Pitch Reel Diameter Parts/Reel TR7 24 mm 8 mm TR13 24mm 8 mm 7 inch 13 inch 750 3,000 1.0 Watts at 70°C 235°C, 30 sec. Maximum resistor power will vary by resistance value. Part Number Coding 7 inch reel, Add TR7 to part number, example RC3001B6TR7 13 inch reel, Add TR13 to part number, example RC3001B6TR13 (Bulk packaging is not available) Direction of Feed CTS Electronic Components www.ctscorp.com © 2005 CTS Corporation. All rights reserved. Information subject to change. Page 2 RC Series 3000 Technical Data 5/3/2007