Solder-In Style High Temp EMI Filters ZZ Series – .118 Dia. – Circuits Available - C APPLICATIONS The ZZ series is intended for use as a high reliability alternative to a commonly available commercial filter type. Due to its smaller body diameter, capacitance is limited. It does provide effective filtering in the MICROWAVE frequency spectrum from 100 MHz through 26 GHz. Designed to be soldered into a package, bracket or bulkhead (and maintain hermeticity), it is ideal for high impedance circuits where large capacitance values are not practical. Alternate lead lengths or special capacitance values are available upon request. Custom packages or bracket assemblies utilizing this feedthru can be furnished to your specifications. CHARACTERISTICS • High temperature construction withstands 300°C installation temperatures. • Features rugged monolithic discoidal capacitor construction. • Glass hermetic seal on one end with epoxy seal on the opposite end. • High purity gold plating provides excellent solderability or compatibility with thermal and ultrasonic wire bonding. SPECIFICATIONS 1. Finish: Gold standard – Silver and solder coat available 2. Material: Case: Cold rolled steel Leads: Alloy 52 steel 3. Operating Temperature Range: -55°C to +125°C 4. Insulation Resistance: At 25°C: 1,000 megohm-microfarad min., or 100,000 megohms min., whichever is less At 125°C: 100 megohm-microfarad min., or 10,000 megohms min., whichever is less 5. Dielectric Withstanding Voltage (DWV): R-level designs: 2.0 times rated DC voltage Class B, Class S designs: 2.5 times rated DC voltage 6. DC Resistance (DCR): .01 ohm, maximum 7. Dissipation Factor (DF): 3% maximum 8. Rated DC Current: 5 Amps, maximum 9. Maximum Installation Temperature: 300°C 10. Supplied with 60/40 solder preform for easy installation STANDARD CONFIGURATION (See Note 1) .118 ±.002 .030 ±.002 .020 ±.005 GLASS SEAL .140 ±.005 .400 ±.020 .110 ±.005 .140 ±.020 CIRCUIT DIAGRAMS C ZZ1 millimeters (inches) 0.05 (.002) 3.05 (.120) Notes: 0.13 (.005) 3.43 (.135) 1. Glass seal on end opposite flange. 0.51 (.020) 3.56 (.140) 2. Metric equivalent dimensions given for information only. 1.02 (.040) 3.68 (.145) 2.79 (.110) 10.16 (.400) 2.95 (.116) — — (See Note 2) 7 Solder-In Style High Temp EMI Filters ZZ Series – .118 Dia. – Circuits Available – C SPECIFICATIONS AVX P/N ZZ1C3-250H ZZ1C3-500H ZZ1C3-101H ZZ1C3-102H ZZ1C3-152H ZZ1A3-250H ZZ1A3-500H ZZ1A3-101H ZZ1A3-102H ZZ1A3-152H ZZ1B3-250H ZZ1B3-500H ZZ1B3-101H ZZ1B3-102H Current AMP 5 5 5 5 5 5 5 5 5 5 5 5 5 5 CKT C C C C C C C C C C C C C C DC Voltage 50 50 50 50 50 100 100 100 100 100 200 200 200 200 1 Decimal point values indicate capacitance in microfarads. Non-decimal point values indicate capacitance in picofarads. 2 Insertion loss limits are based on theoretical values. Actual measurements may vary due to internal capacitor resonances and other design constraints. 1 CAP Min. 25 50 100 1000 1500 25 50 100 1000 1500 25 50 100 1000 For special multi-unit assemblies see Multi-Component Filter Brackets section. 8 Insertion Loss2 Per MIL-STD-220, +25°C 1 10 100 1000 MHz MHz MHz MHz – – – 10 – – 1 15 – – 3 20 – 4 20 31 – 5 21 42 – – – 10 – – 1 15 – – 3 20 – 4 18 36 – 5 21 42 – – – 10 – – 1 15 – – 3 20 – 4 18 36 10 GHz 15 25 30 55 55 15 25 30 55 55 15 25 30 55