BO 07/10/15/27 CPM-50 — 7.5/10/15/27.5 Radial Leads 40/63/160/250/400 VSchematic Cross Section APPLICATIONS Non-inductive, capacitor for professional use with radial leads. Insulated thermoplastic casing, epoxy resin sealed with stand-offs. Schoop Metallized film Some examples of use: e Oscillating circuit, LF filter, coupling and decoupling, frequency discriminator. 6 (0.236) – 1 (0.039) + 0 (0.000) 0.4 (0.016). min Generic specifications: CEI 384-1/CECC 30000/UTE 83100 Sectional specifications: CEI 384-2/CECC 30400/UTE 83151 On the LNZ 44-04 list: Complies with type CPM50 On the GAM-T1 list: ARIANE qualified LS ---- for case* in table page 25 DIMENSIONS: Size Code millimeters (inches) +10% L max. H max. e max. LS ±0.4 ø -0.05 10.1 (0.398) 12.5 (0.492) 17.5 (0.689) 31.25 (1.230) 10.0 (0.394) 10.0 (0.394) 10.5 ... 16.5 (0.413 ... 0.650) 15.0 ... 30.0 (0.591 ... 1.181) 5.0 (0.197) 5.0 (0.197) 5.0 ... 10.0 (0.197 ... 0.394) 7.5 ... 17.5 (0.295 ... 0.689) 7.5 (0.295) 10.0 (0.394) 15.0 (0.591) 27.5 (1.083) 0.6 (0.024) 0.6 (0.024) 0.8 (0.031) 0.8 (0.031) 07 10 15 27 H L STANDARDIZATION Observations 1nF ≤ C ≤ 8.2nF R 4.7nF ≤ C ≤ 220nF R 15nF ≤ C ≤ 2.2µF R 150nF ≤ C ≤ 22µF R HOW TO ORDER BO 15 4 G 0104 K –– Type Class Voltage Capacitance Value Tolerance Suffix Tape and Reel See page 27 PERFORMANCE CHARACTERISTICS Climatic category: Capacitance range: Tolerances on CR: (assoc. series) Nominal voltages: 55/125/56 - Performance Class 1 CR 1 nF to 2.2 µF ±5%, ±10%, ±20% (E6) (other values on request) VR– 40/63/160/250/400 V VR~ 25/40/100/180/200 V Category voltage: VC = 0.5 VR- at 125°C Test voltage: Ve = 1.6 VRTangent of loss angle: D.F. (see page 4) Insulation resistance: IR (see page 5) 24 MARKING Logo - CPM50B Date of manufacture Capacitance and tolerance 2 letter code (CEI 62 code) (year - month) according Nominal voltage to CEI 62 TPC BO 07/10/15/27 NOMINAL VOLTAGE (VR) AND CAPACITANCE VALUES (CR) DEPENDING ON THE DIMENSIONS S i z e C a s e DIMENSIONS: millimeters (inches) Max L 10.1 (0.398) 12.5 10 4 (0.492) 17.5 6 (0.689) 17.5 7 (0.689) 17.5 15 8 (0.689) 17.5 9 (0.689) 17.5 10 (0.689) 31.25 14 (1.230) 31.25 15 (1.230) 31.25 16 (1.230) 27 17* 31.25 (1.230) 31.25 18* (1.230) 31.25 19* (1.230) 07 2 Max H Max e +10% -0.05 Ø 10.0 (0.394) 10.0 (0.394) 10.5 (0.413) 13.5 (0.531) 13.5 (0.531) 14.5 (0.571) 16.5 (0.650) 15.0 (0.591) 17.5 (0.689) 19.5 (0.768) 22.5 (0.886) 26.0 (1.024) 30.0 (1.181) 5.0 (0.197) 5.0 (0.197) 5.0 (0.197) 5.0 (0.197) 6.25 (0.246) 8.5 (0.335) 10.0 (0.394) 7.5 (0.295) 8.75 (0.344) 10.0 (0.394) 12.5 (0.492) 15.0 (0.591) 17.5 (0.689) 0.6 (0.024) 0.6 (0.024) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) LS ±0.4 7.5 (0.295) 10.0 (0.394) 15.0 (0.591) 27.5 (1.083) 40/25 Reference BO VR-/VR~ 63/40 160/100 250/180 Range of Capacitance (CR min. ... max.) 400/200 – – – 4.7 nF/8.2 nF 1 nF ... 3.3 nF 68 nF ... 220 nF 33 nF ... 100 nF 10 nF ... 47 nF 10 nF ... 22 nF 4.7 nF ... 10 nF 330 nF/470 nF 150 nF/220 nF 68 nF ... 150 nF 33 nF/47 nF 15 nF/22 nF 680 nF 330 nF 220 nF 68 nF 33 nF 1 µF 470 nF – 100 nF 47 nF 1.5 µF 680 nF 330 nF 150 nF 68 nF 2.2 µF 1 µF 470 nF 220 nF 100 nF 3.3 µF 1.5 µF 680 nF/1 µF 330 nF 330 nF 4.7 µF 2.2 µF 1.5 µF/2.2 µF 470 nF 220 nF 6.8 µF 3.3 µF – 680 nF 330 nF 10 µF 4.7 µF – 1 µF 470 nF 15 µF 6.8 µF 3.3 µF 1.5 µF 680 nF 22 µF 10 µF 4.7 µF/6.8 µF 2.2 µF 1 µF TPC 25 BO 07/10/15/27 CHARACTERISTIC CURVES Influence of the frequency on the impedance (room temperature). Z (Ω) Z (Ω) Size : 0.7 Size : 10 100 10 10 1 –4 .7 0n nF –1 F F 7n F 00 nF 20 nF 100 1000 ƒ (MHz) Z (Ω) 0.001 0.1 1 10 100 ƒ (MHz) Z (Ω) Size : 15 Size : 27 100 100 10 10 1 1 F 150 n F 220 n F 470 n F TPC 0.1 1 µF 0.01 0.01 F 100 ƒ (MHz) 2.2 µ 10 15 µ F 1 4.7 µ 0.1 0.1 –2 0.01 F 5n –1 F 2n –2 F 7n –4 nF 00 –1 nF 20 –2 nF 70 –4 µF –1 µF .2 0.1 26 –2 0.01 nF 10 2n –1 nF nF 6.8 0.01 1 –4 0.1 F 2.2 4.7 0.1 –2 1n 1 10 ƒ (MHz) BT 07/10/15/BC 15 BO 07/10/15/BD 15 7.5/10/15 - Radial Leads – Taping on Reel for Automatic Insertion CHARACTERISTICS OF THE REEL – 6 (0.236) millimeters (inches) Taping Suffix EN P 10 (0.394) 12.7 ± 1.0 (0.5 ± 0.039) 15 (0.590) 25.4 ± 1.0 (1.0 ± 0.039) Ø 4 (0.157) ± 3 (0.012) 16 +1.5 -0.5 16.5 ± 0.3 (0.650 ± 0.012) H 18 (0.709) ± 0.5 (0.020) 7.5 (0.295) H Lead Spacing tol ± 0.4 (0.016) ± 0.2 (0.008) Suffixes to be used (see page 7) Lead spacing: 7.5 (0.295) (0.630 12.7 (0.500) ± 0.2 (0.008) L.S. +0.059 -0.020 ) 6 (0.236) 18 (0.709) ± 0.5 (0.020) H ± 0.2 (0.008) Lead spacing: 10/15 (0.394/0.590) PACKAGING 7.5 10 15 22 27 Case Code 1 2 C D E0 4 5 6 7 I0 8 9 10 11 12 13 14 15 16 17 18 19 Minimum Quantity* Reel Bulk 2000 1250 1250 1000 850 700 700 1000 1000 1000 833 625 – – – – – – – – – – 3000 1750 1500 1000 1750 1250 1000 750 3000 750 3000 2000 225 200 200 150 160 140 120 100 80 65 Ø 4 (0.157) ± 0.3 (0.012) 12.7 (0.500) ± 0.2 (0.008) L.S. P Adhesive tape m (Other sizes according to standard CEI: 286-2) Dimensions millimeters (inches) Lead Spacing D E (ext) 7.5/10 360 (14.173) 48 (1.890) 15 500 (19.685) 52 (2.047) D E Ø 31 (1.220) Size * Ordering quantities must be a multiple of the above figures TPC 27 Metallized Polyester Film Dielectric Capacitors Type Selection Guide Type Nominal Voltage Presentation TPC UTE VR-(V) VR~(V) 63 ... 400 40 ... 200 Capacitance Range (CR) ±5% (E6 - E12) 1 nF ... 2.2 µF C83151 ±5% (E6 - E12) 63 ... 400 40 ... 200 1 nF ... 2.2 µF C83151 63 ... 630 40 ... 220 1 nF ... 22 µF 63 ...1,000 40 ... 250 1 nF ... 22 µF 250 – 0.47 µF ... 2.2 µF C83151 Radial Leads CPM85 5.08 (0.200) ±10% (E6 - E12) CPM85 BT 5.08 (0.200) ±10% (E6 - E12) CPM-N BH Lead Spacing mm (inches) CPM-83 BF Tolerance on CR (Series) BG C83151 ±5% (E6 - E12) ±10% (E6 - E12) ±20% (E6 - E12) 7.5 (0.295) 10.0 (0.394) 15.0 (0.591) 22.5 (0.886) 27.5 (1.083) ±5% (E6 - E12) ±10% (E6 - E12) ±20% (E6 - E12) 7.5 10.0 15.0 22.5 27.5 ±5% (0.295) (0.394) (0.591) (0.886) (1.083) 15.0 (0.591) BC / BD ±10% CPM50 BO ±5% (E6 - E12) ±10% (E6 - E12) ±20% (E6 - E12) 63 ... 400 40 ... 200 1 nF ... 10 µF ±5% (E6 - E12) 7.62 (0.300) 10.16 (0.400) ±10% (E6 - E12) 15.24 (0.600) ±20% (E6 - E12) 27.94 (1.100) 63 ... 400 40 ... 200 1 nF ... 10 µF ±5% (E6 - E12) ±10% (E6 - E12) ±20% (E6 - E12) 63 ... 1,000 40 ... 250 1 nF ... 22 µF ±5% (E6 - E12) ±10% (E6 - E12) ±20% (E6 - E12) 100 ... 630 40 ... 220 1 nF ... 10 µF ±5% (E6 - E12) ±10% (E6 - E12) ±20% (E6 - E12) 63 ... 1,000 40 ... 250 1 nF ... 22 µF ±5% (E6 - E12) ±10% (E6 - E12) ±20% (E6 - E12) CPM13 C83151 CPM8 S8 C83151 CPM8 SH C83151 Axial Leads CPM72 S9 C83151 CPM72 SG C83151 630 ... 10,000 100 pF ... 1.5 µF ST 6 (0.295) (0.394) (0.591) (1.083) 1 nF ... 22 µF C83151 S4 7.5 10.0 15.0 27.5 25 ... 200 40 ... 400 TPC ±5% (E6 - E12) ±10% (E6 - E12) ±20% (E6 - E12) Metallized Polyester Film Dielectric Capacitors HOW TO ORDER Example of an order: how to order a CPM85 100 nF ±10% 100 V. BT07 4 E Identification Code Dielectric Class 4 Voltage Code C = 25/40 V D = 50/63 V E = 100 V F = 160/200 V G = 250 V H = 275/300 V I = 400 V J = 500 V K = 600/630 V L = 1000 V M = 1600 V N = 2000 V P = 2500 V Q = 3000 V R = 4000 V S = 5000 V T = 6000/6300 V U = 8000 V V = 10 kV Radial Leads CPM83 BF 01 CPM83 BF 02 CPM83 BF 05 CPM83 BF 06 CPM83 BF 07 CPM-N BH 01 CPM-N BH 02 CPM-N BH 05 CPM-N BH 06 CPM-N BH 07 CPM85 BT 07 CPM85 BT 10 CPM85 BT 15 CPM85 BT 22 CPM85 BT 27 CPM85 BG 07 CPM85 BG 10 CPM85 BG 15 CPM85 BG 22 CPM85 BG 27 – BC 15 – BD 15 CPM50 BO 07 CPM50 BO 10 CPM50 BO 15 CPM50 BO 27 CPM13 S4 07 CPM13 S4 10 CPM13 S4 15 CPM13 S4 27 Axial Leads CPM8 S8 10 CPM8 S8 14 CPM8 S8 18 CPM8 S8 31 CPM8 SH 13 CPM8 SH 18 CPM8 SH 25 CPM8 SH 30 CPM8 SH 40 CPM72 S9 10 CPM72 S9 14 CPM72 S9 18 CPM72 S9 27 CPM72 S9 31 CPM72 SG 13 CPM72 SG 18 CPM72 SG 25 CPM72 SG 30 CPM72 SG 40 – ST 22 – ST 36 0104 K Capacitance (EIA code) Tolerance Code Capacitance expressed by 2 J = ±5% significant figures K = ±10% 1st digit: 0 (zero) M = ±20% 2nd and 3rd digit: the 2 significant figures of the capacitance value 4th digit: - for values ≥ 10 pF and ≤ 990 µF: the number of zeros to be added to the capacitance values - for values ≥ 1 pF and ≤ 9.9 pF: the numerical 9 signifying that the capacitance value is to be multiplied by 0.1 - for values < 1 pF: the numerical 8 signifying that the capacitance value is to be multiplied by 0.01 Example: 1000 pF = 0102 8.2 pF = 0829 0.47 pF = 0478 Capacitance expressed by 3 significant figures 1st, 2nd and 3rd digit: the 3 significant figures of the capacitance value 4th digit: - for values > 100 pF and ≤ 999 µF: the number of zeros to be added to the capacitance values - for values > 10 pF and < 100 pF: the numerical 9 signifying that the capacitance value is to be multiplied by 0.1 - for values > 1 pF and < 10 pF: the numerical 8 signifying that the capacitance value is to be multiplied by 0.1 Example: 196 pF = 1960 47.2 pF = 4729 8.28 pF = 8288 TPC –– Suffix DA - DB - DC - DD: lead spacing 5.08 mm taped on reel or ammopack EN Radial types: lead spacing 7.5/10/15 mm taped on reel H=16.5 mm Axial type: (SG series only) Ammopack EP: Taped on reel H=18.5 mm (only for BG type) GA or GB: standard axial taped (S8, S9, ST types) – – Bulk 7