High Voltage SMPS Capacitors Surface Mount and Through-Hole Series D B E A HOW TO ORDER HV 01 A C 104 M A N 650 1 23 4 5 6 78 9 1 AVX Style 2 Size: (See dimensions chart) 3 Voltage: 1K = A, 2K = G, 3K = H, 4K = J, 5K = K 4 Temperature Coefficient: CHIP SEPARATION 0.254 (0.010) TYP. 1.397 (0.055) ±0.254 (0.010) 0.254 (0.010) TYP. .015 x 45 o CHAM TYP. 0.508 (0.020) TYP. 6.35 (0.250) MIN. C 2.54 (0.100) MAX. 0.635 (0.025) MIN. C0G = A, X7R = C, N1500 = 4 2.54 (0.100) TYP. 5 Capacitance Code 6 Capacitance Tolerance: "N" STYLE LEADS C0G: J = ±5% X7R: K = ±10% N1500: J = ±5% K = ±10% M = ±20% K = ±10% M = ±20% Z = +80, M = ±20% -20% 7 Failure Rate: A = Does not apply 8 Termination: N = Straight Lead J = Leads formed in L = Leads formed out 9 Height: (.650 is standard maximum thickness for 5 chip stack see dimensions chart reference dimension A) 0.254 (0.010) RAD. (TYP.) 1.27 (0.050) MIN. (TYP.) 1.778 (0.070) ±0.254 (0.010) "J" STYLE LEADS 0.254 (0.010) RAD. (TYP.) 1.27 (0.050) MIN. (TYP.) 1.778 (0.070) ±0.254 (0.010) "L" STYLE LEADS Dimensions: millimeters (inches) A (max.) Style HV01 HV02 HV03 HV04 HV05 HV06 16.5 16.5 16.5 16.5 16.5 16.5 B (max.) (0.650) (0.650) (0.650) (0.650) (0.650) (0.650) 18.0 18.0 18.0 18.0 18.0 18.0 (0.710) (0.710) (0.710) (0.710) (0.710) (0.710) C ±.025 53.3 39.1 27.2 10.2 6.35 53.3 D ±.025 (2.100) (1.540) (1.070) (0.400) (0.250) (2.100) 10.5 20.3 10.5 10.2 6.35 29.0 (2.160) (1.600) (1.130) (0.440) (0.300) (2.160) No. of leads per side 4 8 4 4 3 11 HV05 HV06 E (max.) (0.415) (0.800) (0.415) (0.400) (0.250) (1.140) 54.9 40.6 28.7 11.2 7.62 54.9 Note: Dimensions A & B are max. dimensions for 5 chip stacks (.120 max. each chip). Maximum Capacitance Available Versus Style AVX Style HV01 HV02 HV03 HV04 Max. Cap. (µF) 1KV 2KV 3KV 4KV 5KV 1KV 2KV 3KV 4KV 5KV 1KV 2KV 3KV 4KV 5KV 1KV 2KV 3KV 4KV 5KV 1KV 2KV 1KV 2KV 3KV 4KV 5KV C0G (NP0)*** .430 .120 .056 .031 .026 .610 .170 .079 .044 .037 .210 .065 .029 .015 .012 .064 .020 .009 .0045 .0037 .024 .0068 1.20 .330 .140 .092 .078 N1500 .700 .210 .092 .050 .042 1.00 .290 .120 .072 .060 .340 .100 .045 .025 .020 .100 .033 .014 .0072 .0063 .039 .011 1.90 .530 .230 .150 .130 X7R 5.50 1.30 .750 .330 .260 7.90 1.80 1.00 .470 .390 2.60 .690 .360 .160 .120 .820 .210 – 15.0 3.50 2.20 1.00 .850 – – – .300 No. of Leads/side** 4 8 4 4 3 11 Standard Max. Stack* 5 5 5 5 5 5 * Values given are for 5 chips stacked. For maximum per chip divide by 5. Maximum thickness per individual chip equals 3.05mm (0.120"). ** Based on 2.54mm (0.100") centers. *** TC FORMULATIONS AVAILABLE UPON REQUEST. Note: Contact factory for other voltage ratings. Additional information on this product is available from AVX’s catalog or AVX’s FAX Service. Call 1-800-879-1613 and request document #019. Visit our website http://www.avxcorp.com 19