AdvancedTCA Connectors acc. to PICMG 3.0 ERNI is anxious to support customers extensively and is gradually completing the product range for interconnect platforms. This also includes the ATCA (Advanced Telecom Computing Architecture) standard. This standard (also known as PICMG 3.0) is one of the latest standards addressing future telecommunication needs. ERNI can supply both power and signal connectors. The AdvancedTCA specifications, beginning with the core specification PICMG 3.0, are aimed at further expanding the market for off-the shelf solutions for high speed communication equipment. Supplementary to the Generic PICMG 3.0 spec. the AdvancedTCA family of specifications are PICMG 3.1 for Ethernet Fabric, PICMG 3.2 for InfiniBand and PICMG 3.3 for StarFabric. The PICMG 3.x specification familiy defines a single connector family for the data transfer. The electrical interconnect has to support high speed differential signaling. Key requirements are the support of various signal rates, telco-specific mechanical constraints, reliability, manufacturability, cost and availability. Key features of the AdvancedTCA platform are: • Scalability • Higher data bandwidth • High level of modularity, and configurability and remote maintainability • Advanced system management • Improved reliability AdvancedTCA is a trademark of PICMG. 1 www.erni.com Catalog E XXXXXX 01/07 Edition 3 Zone 2 Signal Connectors PICMG selected the ERNI ERmet ZD connector (second sourced by Tyco) for use as the high speed connector within the Data Transport Connector zone (Zone 2) with up to 5 ERmet ZD connectors. The Data Transports zone supports four different interfaces: • Base Interface (64 signal pairs) • Fabric Interface (120 signal pairs) • Telephony Synchronization Clock Interface (6 signal pairs) • Update Port Interface (10 signal pairs) For secure and correct mating of the daughtercards ERNI provides solid alignment modules. Ordering Information Configuration PCB Position Number of Pairs Backplane Connector Module 4pair P20, P21, P22, P23, P24 40 signals / 40 grounds 973031 Daughtercard Connector Module 4pair J20, J21, J22, J23, J24 40 signals / 40 grounds 973032 2 www.erni.com Catalog E XXXXXX 01/07 Edition 3 Partnumber Backplane Connector Zone 2 Dimensional Drawing -0,1 0,1 23,4 Date Code 0,05 6,35 Id.-Nr. ( 1,7 ±0.05 Löcher ø 0.6 3 -0,1 0,2 ) 13,4 XXXXXXX ERNI 973031 EE-Zone für durchkontaktierte compliant zone for through hole ±0.05 5,7 ø 0.6 10 9 8 7 6 5 4 3 2 1 4,5 1,5 a b ab c d cd e f ef g h gh 2,5 9x2.5= 22,5 24,95 0,75 -0,1 General Layout Information d cd e f ef g h gh b ab c d cd e f ef g h gh 2,5 ERmet ZD 10 22,5 0,7 Drill (27.5 mil) 1 finished hole = ø0.6mm ±0.05 (23 mil) c 0,65 (25 mil) ab depends from manufacturer and size of the Backplane b 1,15 (45 mil) a 0,25 (10 mil) Additional GND-holes for improved RF-characteristics in pair a-b 2,5 ERmet ZD 10 2,5 1 a 1,5 0,3 (12 mil) 0,15 ERmet ZD 16,5 Tracks are only an example For further layout information please refer to PICMG Specifications. 3 www.erni.com Catalog E XXXXXX 01/07 Edition 3 Daughtercard Connector Zone 2 Dimensional Drawing 9x2.5= 22,5 0,75 2,5 1,5 f e 19,4 h g 4,5 d c b a 10 1 EE-Zone für durchkontaktierte Löcher ø 0.6 ±0.05 compliant zone for through hole ø 0.6 gh h g ef f e cd d c ab b a 973032 10,8 -0,2 1,5 ERNI XXXXXXX 1,5 15,7 0,1 0,1 2,4 -0,1 1 24,95 ±0.05 0,1 27,9 1,8 1 21,4 -0,1 Firmensignet Position Date Code Id.-Nr. General Layout Information Additional GND-holes for improved RF-characteristics in pair a-b 22,5 2,5 2,5 2,5 ERmet ZD ERmet ZD 1 ERmet ZD 10 1 1 16,5 4,5 1,5 1,5 10 a a b b ab ab c c d d cd cd e e f f ef ef g g h h gh gh 1,05 (41 mil) depends from manufacturer and board size 0,3 (12 mil) track difference = 1.6 mm 0,5 (20 mil) Tracks are only an example. 0,15 (6 mil) 0,7 Drill (27.5 mil) 0,25 (10 mil) finished hole = ø0.6 mm ± 0.05 (23 mil) For further layout information please refer to PICMG Specifications. 4 www.erni.com Catalog E XXXXXX 01/07 Edition 3 Zone 1 Power Connector According to PICMG 3.0 the AdvancedTCA Power Connector is qualified for use in Zone 1. The connector consists of 8 size 16 contacts along with 22 size 22 contacts. The insulation body has an integrated guiding feature. The contact terminals provide compliant pressfit zones for easy assembly to the PCB. The reliability of the pressfit technology has been proven many times in long term field experiences. The pressfit zones are flat-rock compatible, there is no need for special press-in tools. The excellent design fully avoids any risk of damaging the connector during the press-in process. The use of high conductivity copper alloy allows high current carrying capability. The power contacts are capable of carrying 16A and each signal contact is capable of carrying 2A. The female contacts’ „lead in“ design combined with cavity protection prevent the contacts from being damaged. Contacts which were plated subsequently do not have any bare ends and therefore are suitable for long term usage in critical environments. A mounting screw (customer supplied) may be used, but is not necessarily required. The connector meets all PICMG 3.0 performance requirements and is fully intermateable with alternative connectors which were designed according to the same standard. Features • In accordance with the PICMG 3.0 standard • Gold over nickel plating in contact area, tin plating on pcb terminals. • Controlled plating thickness at female mating point • RoHS compliant • Stamped female contacts with high conductive material for highest current carrying capacity • Improved normal contact force and relaxation compared to machined contacts • Reliable and proven pressfit zone • Standard flat rock press-in tools • No additional pcb retention hardware required • Female contacts fully protected through proven lead-in design • Positions 1, 2, 3 and 4 are not loaded • For specific applications partial contact loading is possible PICMG 3.0 Partnumber: ERNI Partnumber: ZP-A-030F-P1-2B 214077 5 www.erni.com Catalog E XXXXXX 01/07 Edition 3 Electrical and Mechanical Characteristics for Zone 1 Power Connector Technical data Temperature range -55/125°C Current rating Pos. 5-24, 27, 32 Pos. 25, 26, 28-31, 33, 34 Clearance and creepage distance Pos. 5-16 Pos. 17-24 Pos. 25-26 Pos. 27-34 Pos. 13-16 to 17-20 Pos. 21-24 to 25, 26 Pos. 25, 26 to 27-29 Voltage rating Has to be determined according to client-specific using case (degree of environmental pollution) according to IEC 60664. Dielectric strength Pos. 1-16 Pos. 17-24 Pos. 25-34 Contact resistance < 20 mΩ Insulation resistance > 104 MΩ 2A 16 A min. 0.7 mm min. 2.5 mm min. 5.5 mm min. 1.4 mm min. 3.0 mm min. 4.0 mm min. 2.0 mm 1000 Vrms 2000 Vrms 2000 Vrms Materials Housing: Plastic material (symbol) PA 46 GF 30 CTI value CTI 225 UL flame rating UL 94 V-0 UL file (plastic material) E47960 Contact and mating area Base Material Cu alloy Plating 0.8 µm Au over 2-3 µm Ni Termination area Base Material Cu alloy Plating 0.5-2 µm Sn matt over 2-3 µm Ni Environment compatibility Recycling no flame-retardent additives, no toxic additives allow easy recycling 6 www.erni.com Catalog E XXXXXX 01/07 Edition 3 Power Connector Zone 1 Dimensional Drawing 28,6 max. 17,5 max. 10,45 max. Bestückungsplan / contact assembly Datum Verpackt in Tray Verpackungseinheit: 32 St. 342,5 16,1 +0,1 XXXXXX ERNI 214077 ZP - A - 030F - P1 - 2B tray packaging packaging unit 32 pcs 269,5 66,5 264,5 183,5 ( 5,5 ) 6 +0,2 -0,1 38,5 PCB Layout 1) (22x) 2x +0,09 1 -0,06 Schichtaufbau im metallisierten Loch ø 1 siehe Zeichnung 164062 Nr. 6 oder 114124 alle Löcher 0.05 diameter of drilled hole ø 1 see drawing 164062 no. 6 or 114124 0.05 2,5 0,05 22,55 6 Schichtaufbau im metallisierten Loch ø 1,6 siehe Zeichnung 164062 Nr. 10 oder 114407 diameter of drilled hole ø 1,6 see drawing 164062 no. 10 or 114407 +0,09 2) (8x) 1,6 -0,06 0.05 alle Löcher 2x 1) 17 21 28 3,9 30 2) 29 31 B 34 ø 1,6 ø 1,6 4,5 9,6 26 16 +0.09 -0,06 Durchmesser des metallisierten Loches +0.09 -0,06 diameter of finished plated-through hole 33 32 8 ø 1,0 ø 1,0 4,5 13 25 2,2 6,6 5 +0.09 -0.06 +0.09 -0.06 Durchmesser des metallisierten Loches diameter of finished plated-through hole Fehlende Angaben siehe PICMG 3.0 / missing information see PICMG 3.0 24 20 3 2 9,4 0.05 1,75 13,7 0,05 18,5 10 12 14,5 21,2 23,9 26,6 A 7 www.erni.com Catalog E XXXXXX 01/07 Edition 3 ERNI Electronics GmbH & Co. KG Seestrasse 9, Postfach 73099 Adelberg, Deutschland Telefon +49 (0)71 66 50-0 Fax +49 (0)71 66 50-282 [email protected] Europe South America ERNI Electronics, Inc. 3005 E. Boundary Terrace Midlothian, VA 23112 USA Tel +1 (804) 228-4100 Fax +1 (804) 228-4099 [email protected] North America ERNI Asia Holding Pte Ltd. Blk 4008 Ang Mo Kio Avenue 10 #04-01/02 Techplace I Singapore 569625 Tel +65 6 555 5885 Fax +65 6 555 5995 [email protected] Asia Canada Australia Africa Mexico New Zealand www.erni.com ERNI Electronics GmbH & Co. KG 2007 • Printed in Germany. A policy of continuous improvement is followed and the right to alter any published data without notice is reserved. 8 www.erni.com Catalog E XXXXXX 01/07 Edition 3