MicroSpeed ® Application Note 4.0 www.erni.com Katalog D 074518 Ausgabe 12/10 3, 03/05 www.erni.com 1 www.erni.com 12/10 ERNI MicroSpeed Application Note 4.0 General Features The high-speed SMT connector MicroSpeed with a pitch of 1.0 mm was especially designed for modern board-to-board applications in telecom and datacom equipments. For next generation systems with data rates of 10 GBit/s and more this modular connector system is the right solution. MicroSpeed features differential signal transmission with a impedance of 100 Ohm or single ended signal transmission with a impedance of 50 Ohm. An excellent signal integrity is achieved by a design with 2 signal and 2 shield contact rows. The termination pins of the shield contacts are available in 2 options: SMT or THR (Thru Hole Reflow). For fully automatic SMT assembly ERNI provides tape-and-reel packaging. A further development for rugged applications is available - the MicroSpeed Blind Mate connector housing comes along with thicker side walls and is manufactured of high impact resisant thermoplastic UL94 V-0 rated LCP. The housing provides two polarized guide elements for alignment and secure mating. For the completion of the MicroSpeed portfolio right angle versions are available. At present, customers can choose from a wide range of connector mating possibilities - direct attachment to a printed circuit board (PCB) in either a right angle, Board-to-Board or co-planar arrangement for space-saving connections. For rugged applications the MicroSpeed 90° version are also comes along as blind mate version with reinforced side walls and two polarized guide elements for alignment and secure mating. Pitch: within a row: 1.0 mm between rows: 1.5 mm Style: - Vertical male and vertical female connectors standard or blind mate - Right angle male and female connectors standard or blind mate - For vertical and right angle versions are also special EMC types abvailable Termination: signal contacts: SMT ground contacts: THR or SMT Technical Data Electrical data Differential impedance: 100 Ohm Single ended impedance: 50 Ohm Crosstalk: < 2% at 50 ps signal risetime Material data Insulation body: LCP Contact material: Cu alloy Plating: Mating area: Au Termination area: Sn 3 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Standard 2-Row Vertical Connectors Dimensional Drawings Male Connector SMT Version 5,65 26,95 4,6 8,95 4,8 ERNI Date Code 0,65 144680 7,05 XXXX Ident-Nr. A1 0,5 0,6 0,8 6,4 1,6 Montagehaube 26 ( 26,95 ) b1 1,5 b25 a25 a1 1 24 x 1 = 24 Male Connector SMT/THR Version 26,95 5,65 4,6 8,95 6,4 ERNI XXXX 144681 1,2 4,8 A1 7,6 1,6 Montagehaube Ident-Nr. 0,8 0,15 0,65 0,5 Date Code 0,6 26 ( 26,95 ) b1 1,5 b25 a25 a1 1 24 x 1 = 24 Packaging Abspulrichtung - Reel off Direction - Tape on Reel Packaging 4 44 Verpackt in Gurtverpackung 150 44.5 330 4 www.erni.com 12/10 12 ERNI MicroSpeed - Application Note 4.0 Standard 2-Row Vertical Connectors Female Connector SMT Version 26,55 5,5 6,5 4,15 ERNI 144662 Date Code 0,8 Ident-Nr. 0,6 0,7 XXXX 4,5 A1 3,8 5,5 Montagehaube 0,5 26 b1 b25 3,85 1,5 ( 26,55 ) 1 a1 a25 24 x 1 = 24 Female Connector SMT/THR Version 26,55 5,5 6,5 4,15 0,6 ERNI 144663 Date Code 3,8 XXXX 0,5 Ident-Nr. 0,7 A1 0,7 6,75 5,5 Montagehaube 0,8 26 ( 26,55 ) b25 3,85 1,5 b1 a1 a25 1 24 x 1 = 24 Packaging Abspulrichtung - Reel off Direction - Tape on Reel Packaging - Packaging unit: 500 pcs 4 a1 12 44 Verpackt in Gurtverpackung Verpackungseinheit: 500 Stück 150 330 44,5 5 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Standard Blind Mate 2-Row Vertical Connectors Male Connector Blind Mate SMT Version 28,95 6,75 8,95 4,6 0,6 26 27,55 0,8 b1 1,5 2,25 b25 4,475 6,42 4,8 0,5 0,65 7,07 2,93 1,62 Ansaughaube hood a25 a1 1 24 x 1 = 24 25,45 Packaging Abspulrichtung - Reel off Direction Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 400 Stück - Packaging unit: 400 pcs 56 a1 56,5 150 330 m 6 www.erni.com 12/10 16 ERNI MicroSpeed - Application Note 4.0 Standard Blind Mate 2-Row Vertical Connectors Female Connector Blind Mate SMT Version 5,5 4,15 0,7 0,8 0,5 0,6 3,8 5,4 Ansaughaube hood 5,1 6,5 26 27,4 b25 4 1,5 2,1 b1 a1 1 a25 24 x 1 = 24 25,3 Packaging Abspulrichtung - Reel off Direction Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 400 Stück - Packaging unit: 400 pcs 16 56 a1 150 56,5 330 7 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Layouts Standard and Blind Mate 2-Row Vertical Connectors Vertical Male Connectors SMT Version Vertical Male Connectors SMT/THR Version Vertical Female Connectors SMT Version Vertical Female Connectors SMT/THR Version PCB-Layout 26 8x3= 1 3 0,6 24 0,05 0,7 1,5 0,7 1 1 0,5 24 x 1 = 24 Heat trap We recommend the heat trap design for the shielding THR vias in the GND-Layer to improve soldering behavior. Annular ring depends from board manufacterer. 0,2 0,35 min. 0,6 8 www.erni.com 12/10 4,5 0,9 ERNI MicroSpeed - Application Note 4.0 Stencil Standard and Blind Mate 2-Row Vertical Connectors We recommend a stencil thickness of 6 mil/150µm. Stencil for SMT Version 0,7 4,45 0,15 1,5 3 0,65 8 x 3 = 24 0,8 1 0,5 24 x 1 = 24 Stencil is for male and female the same. The position in relationship to the guiding holes have to be considered. Stencil for SMT/THR Version 1 8 x 3 = 24 3 1,5 0,7 4,5 1,6 -0,1 1 1 0,5 24 x 1 = 24 9 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 EMC Standard 2-Row Vertical Connectors Dimensional Drawings Male Connector SMT Version 5,85 26,95 4,6 8,95 6,42 0,65 4,8 Montagehaube 0,6 0,5 x 0,8 b25 3,675 1,5 b1 a1 a25 1 24 x 1 = 24 Female Connector SMT Version 5,5 6,5 4,15 3,8 0,7 0,6 5,4 0,7 Montagehaube 0,5 0,8 b1 1,5 b25 a25 a1 24 x 1 = 24 Packaging Male and Female Connectors a1 Abspulrichtung - Reel off Direction 44 Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 280 Stück - Packaging unit: 280 pcs 150 44,5 330 4 10 www.erni.com 12/10 16 ERNI MicroSpeed - Application Note 4.0 EMC Blind Mate 2-Row Vertical Connectors Male Connector Blind Mate SMT Version 6,75 28,95 4,6 8,95 0,5 x 0,8 6,4 0,65 4,8 Montagehaube 0,6 b25 4,125 1,5 b1 a1 a25 1 24 x 1 = 24 Female Connector Blind Mate SMT Version 5,5 4,15 3,8 0,7 0,6 5,4 0,7 Montagehaube 4,4 6,5 0,5 0,8 27,4 b1 1,5 b25 a25 a1 24 x 1 = 24 Packaging Male and Female Connectors a1 Abspulrichtung - Reel off Direction 56 Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 280 Stück - Packaging unit: 280 pcs 150 56,5 330 16 11 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Layouts EMC Standard and Blind Mate Type 2-Row Vertical Connectors Male Connectors Copper Pads Solder Paste Solder resist 12 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Layouts EMC Standard and Blind Mate Type 2-Row Vertical Connectors Female Connectors Copper Pads Solder Paste Solder resist 13 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 EMC Standard 2-Row Right Angle Connectors Dimensional Drawings Male Connectors SMT Version 24 x 1 = 24 8,8 b 25 5,1 5,85 5,95 b1 a 25 3 26 6,1 0,675 a1 27 SMT/THR Version 24 x 1 = 24 8,8 b1 5,85 5,1 1,5 b 25 a 25 0,7 1,2 0,5 x 0,8 0,1 a1 0,6 3 26 6,1 27 Packaging Abspulrichtung - Reel off Direction 44 Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 400 Stück - Packaging unit: 400pcs 150 44,5 330 16 14 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 EMC Standard 2-Row Right Angle Connectors Female Connectors SMT Version 24 x 1 (=24) 1,5 5,25 0,7 b25 b1 a1 a25 6,1 3 26 9,1 27 26 SMT/THR Version 24 x 1 (=24) 4,9 6,1 3 26 0,7 a25 0,5 x 0,8 0,6 1,2 1,5 a1 5,1 b25 b1 9,1 27 26 Packaging Abspulrichtung - Reel off Direction 44 Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 500 Stück - Packaging unit: 500 pcs 150 44,5 330 16 15 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 EMC Blind Mate 2-Row Right Angle Connectors Dimensional Drawings Male Connectors Blind Mate SMT Version 8,8 24 x 1 = 24 a 25 6,75 0,35 5,1 b 25 a1 3 0,675 26 6,1 27 28,95 SMT/THR Version 8,8 24 x 1 = 24 b1 a 25 6,75 0,35 5,1 1,5 b 25 1,2 0,5 x 0,8 0,7 a1 0,6 3 26 6,1 27 28,95 Packaging Abspulrichtung - Reel off Direction 44 Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 400 Stück - Packaging unit: 400 pcs 150 44,5 330 16 16 www.erni.com 12/10 4 ERNI MicroSpeed - Application Note 4.0 EMC Blind Mate 2-Row Right Angle Connectors Female Connectors Blind Mate SMT Version 27,4 15 x 1 (=15) b25 1,5 b1 a1 0,6 a25 6,1 3 26 9,1 27 27,4 SMT/THR Version 24 x 1 (=24) 4,9 6,1 3 26 0,7 a25 0,5 x 0,8 0,6 0,6 1,2 1,5 a1 5,1 b25 b1 9,1 27 27,4 Packaging Abspulrichtung - Reel off Direction 44 Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 500 Stück - Packaging unit: 500 pcs 150 44,5 330 16 4 17 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Layouts EMC Standard and Blind Mate 2-Row Right Angle Connectors Male and Female Connectors Standard and Blind Mate Copper Pads Solder Paste Solder resist 18 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Available Connector Heights 2-Row Vertical Versions Male Connector Heights 10 mm 9 mm 2 mm 1 mm Female Connector Heights 10 mm 8 mm 6 mm 4 mm 19 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Available Connectors Standard 2-Row Vertical Connectors Male Female Height Part Number SMD Part Number THR Height Part Number SMD Part Number THR Board-toBoard Height 1 mm 144680 144681 4 mm 144662 144663 5 mm 2 mm 224557 224558 4 mm 144662 144663 6 mm 1 mm 144680 144681 6 mm 224512 224513 7 mm 2 mm 224557 224558 6 mm 224512 224513 8 mm 1 mm 144680 144681 8 mm 224514 224515 9 mm 2 mm 224557 224558 8 mm 224514 224515 10 mm 1 mm 144680 144681 10 mm 224516 224517 11 mm 2 mm 224557 224558 10 mm 224516 224517 12 mm 9 mm 224559 224560 4 mm 144662 144663 13 mm 10 mm 224561 224562 4 mm 144662 144663 14 mm 9 mm 224559 224560 6 mm 224512 224513 15 mm 10 mm 224561 224562 6 mm 224512 224513 16 mm 9 mm 224559 224560 8 mm 224514 224515 17 mm 10 mm 224561 224562 8 mm 224514 224515 18 mm 9 mm 224559 224560 10 mm 224516 224517 19 mm 10 mm 224561 224562 10 mm 224516 224517 20 mm 10 mm 224561 224562 16 mm 234605 234606 26 mm 20 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Available Connectors Standard 2-Row Vertical Connectors Blind Mate Male Female Height Part Number SMD Part Number THR Height Part Number SMD Part Number THR Board-toBoard Height 1 mm 254877 354182 4 mm 254876 354175 5 mm 2 mm 354183 354184 4 mm 254876 354175 6 mm 1 mm 254877 354182 6 mm 354176 354177 7 mm 2 mm 354183 354184 6 mm 354176 354177 8 mm 1 mm 254877 354182 8 mm 354178 354179 9 mm 2 mm 354183 354184 8 mm 354178 354179 10 mm 1 mm 254877 354182 10 mm 354180 354181 11 mm 2 mm 354183 354184 10 mm 354180 354181 12 mm 9 mm 354185 354186 4 mm 254876 354175 13 mm 10 mm 354187 354188 4 mm 254876 354175 14 mm 9 mm 354185 354186 6 mm 354176 354177 15 mm 10 mm 354187 354188 6 mm 354176 354177 16 mm 9 mm 354185 354186 8 mm 354178 354179 17 mm 10 mm 354187 354188 8 mm 354178 354179 18 mm 9 mm 354185 354186 10 mm 354180 354181 19 mm 10 mm 354187 354188 10 mm 354180 354181 20 mm 21 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Available Connectors EMC Standard 2-Row Vertical Connectors Male Female Height Part Number SMD Part Number THR Height Part Number SMD Part Number THR Board-toBoard Height 1 mm 374732 - 4 mm 374730 - 5 mm 2 mm 374733 - 4 mm 374730 - 6 mm 1 mm 374732 - 10 mm 374734 11 mm 2 mm 374733 - 10 mm 374734 12 mm EMC Blind Mate 2-Row Vertical Connectors Male Female Height Part Number SMD Part Number THR Height Part Number SMD Part Number THR Board-toBoard Height 1 mm 374723 - 4 mm 374725 - 5 mm 2 mm 374724 - 4 mm 374725 - 6 mm 1 mm 374723 - 10 mm 374726 11 mm 2 mm 374724 - 10 mm 374726 12 mm EMC Standard 2-Row Right Angle Connectors Male Female Number of Pins Part Number SMD Part Number THR Number of Pins Part Number SMD Part Number THR 50 244692 374721 50 244676 374719 EMC Blind Mate 2-Row Right Angle Connectors Male Female Number of Pins Part Number SMD Part Number THR Number of Pins Part Number SMD Part Number THR 50 284332 374722 50 284310 374720 22 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Standard 7-Row Vertical Connectors Dimensional Drawings Male Connectors 91 contacts SMT Version SMT/THR Version 14,95 14,95 0,5 XXXXXXX ERNI 224212 g13 0,8 0,15 g13 g1 a13 a1 1 12 x 1 = 1,25 6 x 1,25 = 7,5 7,5 g1 1,25 6 x 1,25 = 4,8 4,8 0,6 14 1,2 0,65 0,8 0,65 5,45 4,8 A1 4,8 234752 0,6 14 11,65 Date Code ERNI 0,5 Ident-Nr. XXXXXXX 5,45 11,65 Date Code A1 Ident-Nr. a13 a1 1 12 12 x 1 = 12 Female Connectors 91 contacts SMT/THR Version 0,65 0,6 0,8 0,5 ERNI 234097 0,65 0,6 0,5 0,8 14 14 g13 g1 g13 a1 a13 1 12 x 1 = 9,85 1,25 9,85 1,25 a1 6 x 1,25 = 7,5 7,5 g1 6 x 1,25 = XXXXXXX Ident-Nr. 3,8 A1 5 224209 3,8 ERNI 0,7 XXXXXXX 10,15 Date Code 4,5 A1 14 10,15 Ident-Nr. 4,5 14 Date Code 0,7 SMT Version a13 1 12 x 1 = 12 12 23 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Standard 7-Row Vertical Connectors Dimensional Drawings Male Connectors 133 contacts SMT Version 20,95 ERNI 214355 20 0,8 0,65 XXXXXXX 0,6 0,5 4,8 4,8 A1 5,45 11,65 Date Code Ident-Nr. g19 1,25 6 x 1,25 = 7,5 g1 a19 a1 1 18 x 1 = 18 SMT/THR Version 20,95 0,8 0,15 234753 g19 1,25 6 x 1,25 = 7,5 g1 a19 a1 1 18 x 1 = 18 24 www.erni.com 1,2 ERNI 20 0,65 XXXXXXX 0,6 0,5 4,8 4,8 A1 5,45 11,65 Date Code Ident-Nr. 12/10 ERNI MicroSpeed - Application Note 4.0 Standard 7-Row Vertical Connectors Female Connectors 133 contacts SMT Version 20 10,15 Date Code ERNI 3,8 XXXXXXX 214352 0,65 0,6 0,8 0,5 0,7 A1 Ident-Nr. 20 g19 9,85 1,25 6 x 1,25 = 7,5 g1 a1 a19 1 18 x 1 = 18 SMT/THR Version 20 10,15 Date Code ERNI 3,8 XXXXXXX 234098 0,65 0,6 0,8 0,5 0,7 5 A1 Ident-Nr. 20 g19 9,85 1,25 6 x 1,25 = 7,5 g1 a1 a19 1 18 x 1 = 18 25 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Standard Blind Mate 7-Row Vertical Connectors Dimensional Drawings Connectors Blind Mate 91 contacts Male Connectors 16,95 12,75 Montagehaube 8,95 10,6 4,8 0,8 0,6 0,5 0,65 5,45 4,8 1,9 hood 14 15,55 g1 1,25 6,2 6 x 1,25 = 7,5 1,25 g13 a1 a13 1 12 x 1 = 12 Female Connectors 11,3 6,8 10,15 Montagehaube 0,8 0,5 14 15,4 13,3 g13 6 1,25 9,85 6 x 1,25 = 7,5 1,25 g1 a1 1 a13 12 x 1= 12 26 www.erni.com 12/10 0,7 0,6 3,8 5,1 1,6 hood ERNI MicroSpeed - Application Note 4.0 Standard Blind Mate 7-Row Vertical Connectors Connectors Blind Mate 133 contacts Male Connectors 22,95 12,75 8,95 10,6 Montagehaube 4,8 0,6 0,8 20 0,65 0,5 5,45 4,8 1,9 hood 21,55 g13 6,2 1,25 6 x 1,25 = 7,5 1,25 g1 a1 1 a13 18 x 1 =18 Female Connectors 11,3 6,8 10,15 Montagehaube 0,8 0,5 0,6 0,7 3,8 5,1 1,6 hood 20 21,4 19,3 g1 6 1,25 9,85 6 x 1,25 = 7,5 1,25 g19 a19 a1 1 18 x 1 = 18 27 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Layouts Standard and Blind Mate 7-Row Vertical Connectors Male Connectors 91 contacts SMT Version SMT/THR Version 14 14 4x3= 0,85 12 4x3= 0,7 0,6 0,8 0,65 3 0,9 1 3 0,05 0,7 0,9 R0,1 R0,1 a 7,5 a a1 0,5 6 x 1,25 = 0,5 10,45 0,5 a 1,25 7,5 a 6 x 1,25 = 1,25 10,45 12 a1 0,5 0,85 1 1 1 12 x 1 = 12 x 1 = 12 1 12 Female Connectors 91 contacts SMT Version SMT/THR Version 14 14 4x3= 4x3= 12 12 1 0,85 0,8 3 0,9 0,65 3 0,7 0,6 0,05 0,9 0,7 R0,1 0,5 1 12 x 1 = 1,25 12 x 1 = 12 12/10 6 x 1,25 = 10,5 0,7 1 a1 28 www.erni.com R0 0,5 0,85 a1 1 6 x 1,25 = 1,25 0,7 10,45 7,5 7,5 a 12 ,1 ERNI MicroSpeed - Application Note 4.0 Layouts Standard and Blind Mate 7-Row Vertical Connectors Male Connectors 133 contacts SMT Version SMT/THR Version 6x3= 20 20 18 6x3= 0,85 0,6 0,8 0,65 3 0,9 0,7 0,7 R0,1 18 x 1 = a1 0,5 0,85 6 x 1,25 = 1,25 0,5 a a1 0,5 1 10,45 7,5 1,25 1 6 x 1,25 = a 7,5 a a 0,5 3 0,9 R0,1 10,45 1 18 0,05 1 18 18 x 1 = 18 1 Female Connectors 133 contacts SMT Version SMT/THR Version 20 6x3= 20 18 6x3= 0,85 1 3 0,05 0,7 R0,1 0,9 R0,1 0,5 0,85 1 18 x 1 = 7,5 1,25 0,7 10,5 6 x 1,25 = 0,7 1,25 7,5 a a1 0,5 1 18 x 1 = 18 6 x 1,25 = a 10,45 0,6 3 0,9 0,8 0,65 0,7 a1 18 18 29 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Stencil Standard and Blind Mate 7-Row Vertical Connectors Male Connectors 91 contacts SMT Version SMT/THR Version 4x3= 0,65 3 4x3= 12 12 1,6 -0,1 0,8 3 0,15 R0,1 0,15 1 12 x 1 = a1 0,5 a1 0,5 6 x 1,25 = 1,25 0,5 10,45 6 x 1,25 = 0,5 10,45 1,25 7,5 7,5 R0,1 1 12 x 1 = 12 12 The position in relationship to the guiding holes have to be considered. Female Connectors 91 contacts SMT Version SMT/THR Version 4x3= 4x3= 12 0,8 1,6 -0,1 3 0,15 0,65 3 12 0,5 a1 1 12 x 1 = a1 12 The position in relationship to the guiding holes have to be considered. 30 www.erni.com 1,25 0,5 0,15 12/10 6 x 1,25 = 0,7 10,5 6 x 1,25 = 1,25 0,7 10,45 7,5 7,5 R0,1 1 12 x 1 = 12 R0 ,1 ERNI MicroSpeed - Application Note 4.0 Stencil Standard and Blind Mate 7-Row Vertical Connectors Male Connectors 133 contacts SMT Version SMT/THR Version 6x3= 6x3= 3 0,15 R0,1 1 a1 0,5 a1 0,5 1 0,15 18 18 x 1 = 6 x 1,25 = 1,25 0,5 10,45 6 x 1,25 = 0,5 1,25 7,5 7,5 R0,1 10,45 18 1,6 -0,1 0,8 0,65 3 18 18 x 1 = 18 The position in relationship to the guiding holes have to be considered. Female Connectors 133 contacts SMT Version SMT/THR Version 6x3= 6x3= 18 18 0,85 3 0,65 0,8 1,6 -0,1 3 0,15 R0,1 a1 0,5 18 x 1 = 0,5 1 18 x 1 = 18 6 x 1,25 = 1,25 0,7 a1 0,15 1 10,5 6 x 1,25 = 1,25 0,7 10,45 7,5 7,5 R0,1 18 The position in relationship to the guiding holes have to be considered. 31 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Application Example for 7-Row Vertical Connectors Real-world application example: 24 x 10 Gigabit per second differential transmission on 4-layer flexible printed circuit board (FPC). Highspeed inner layer shown only. For connector location refer silk screen‘s rectangular shape. Fully shielded stripline design. Differential lines length-matched for skew-compensation. 32 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Standard Vertical Power Modules Male Power Modules SMT Version SMT/THR Version Packaging Abspulrichtung - Reel off Direction Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 400 Stück - Packaging unit: 400 pcs 150 32,5 a1 16 32 4 330 33 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Standard Vertical Power Modules Female Power Module SMT Version SMT/THR Version 5,5 6,5 4,15 214912 0,8 Date Code 0,5 0,6 Ident-Nr. 0,7 ERNI 3,8 5,4 Montagehaube 0,7 6,6 A1 XXXX 11,55 11 3,85 ( 11,55) a1 a5 4x2= 8 Packaging Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 400 Stück - Packaging unit: 400 pcs Abspulrichtung - Reel off Direction 4 32,5 32 150 16 a1 330 34 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Standard Blind Mate Vertical Power Modules Male Blind Mate Power Modules SMT Version 6,75 14,15 8,95 Angsaughaube 4,6 6,3 4,8 0,5 0,6 11 0,8 0,65 6,95 2,78 1,5 hood 12,45 ohne Angsaughaube 2,25 4,475 without hood 2 a5 10,15 a1 4x2=8 SMT/THR Version 6,75 14,15 8,95 Angsaughaube 4,6 6,3 4,8 0,5 0,6 11 0,8 0,65 6,95 2,78 1,5 hood 12,45 ohne Angsaughaube 2,25 4,475 without hood 2 a5 10,15 a1 4x2=8 Packaging Abspulrichtung - Reel off Direction Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 400 Stück - Packaging unit: 400 pcs 44,5 a1 16 44 150 4 330 35 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Standard Blind Mate Vertical Power Modules Female Blind Mate Power Module SMT Version 5,5 6,5 4,18 Ansaughaube 0,6 3,8 0,8 0,5 0,7 5,1 5,4 hood 11 4 2,1 12,4 4x2=8 a1 a5 10 SMT/THR Version 5,5 Ansaughaube 0,6 3,8 5,4 4,18 5,1 6,6 hood 0,8 0,5 0,7 6,5 11 4 2,1 12,4 4x2=8 a1 a5 10 Packaging Abspulrichtung - Reel off Direction Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 400 Stück - Packaging unit: 400 pcs a1 44 4 150 44,5 330 36 www.erni.com 12/10 16 ERNI MicroSpeed - Application Note 4.0 Layouts Standard and Blind Mate Vertical Power Modules Male Power Modules SMT Version SMT/THR Version Leiterplatten-Layout / PCB-Layout Leiterplatten-Layout / PCB-Layout 11 11 3x3=9 3x3=9 0,85 1 0,8 3 3 0,7 0,6 ±0,05 0,7 0,9 4,5 0,75 2,6 2,6 0,75 0,65 0,9 0,8 0,8 0,85 0,275 2 1,5 2 1,5 4x2=8 1 4x2=8 Female Power Modules SMT Version SMT/THR Version Leiterplatten-Layout / PCB-Layout Leiterplatten-Layout / PCB-Layout 11 3x3=9 11 3x3=9 0,85 1 0,8 3 3 4,5 2,6 0,9 0,75 0,75 2,6 0,6 ±0,05 0,7 0,9 4,45 0,65 0,7 0,8 0,8 2 1,5 1 2 0,85 4x2=8 1,5 4x2=8 37 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Stencil Standard and Blind Mate Vertical Power Modules Male Power Modules SMT Version 3x3= SMT/THR Version 3x3= 9 3 9 1,6 -0,1 3 0,8 0,5 5 2,4 2,4 4,45 0,65 0,65 0,6 0,6 0,65 2 4x2= 0,5 2 8 4x2= 8 The position in relationship to the guiding holes have to be considered. Female Power Modules SMT Version 3x3= SMT/THR Version 9 3x3= 3 9 1,6 -0,1 3 0,8 0,5 5 2,4 2,4 4,45 0,65 0,65 0,6 0,6 0,65 2 4x2= 8 4x2= The position in relationship to the guiding holes have to be considered. 38 www.erni.com 0,5 2 12/10 8 ERNI MicroSpeed - Application Note 4.0 Standard Right Angle Power Modules Male Power Modules SMT Version SMT/THR Version 11,15 11,15 4x2=8 5,85 2,075 5,25 5,1 0,7 0,8 2,5 2,75 3 12,15 8,8 12,15 0,5 11 2,75 6,1 3 a1 10,15 2,5 11 3,85 5,85 10,15 a5 0,6 0,8 0,7 0,5 0,6 5,1 a1 5,25 a5 9,2 9,1 2,075 3,85 4x2=8 6,1 8,8 THR Version 11,15 0,5 0,6 5,85 5,1 a1 0,8 0,7 a5 5,25 9,2 2,075 3,85 4x2=8 10,15 2,5 11 2,75 3 6,1 8,8 12,15 39 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Standard Right Angle Power Modules Female Power Modules SMT Version SMT/THR Version 11 2,15 a1 a5 11 0,5 0,6 2,4 6,1 11 8,8 11,9 THR Version 11 2,15 5,1 5,25 4,15 9,2 a5 0,95 0,5 0,6 0,7 1,2 a1 0,8 10 2,4 11 6,1 3 8,8 11,9 40 www.erni.com 2,4 6,1 3 8,8 11,9 4x2=8 0,8 10 3 12/10 0,95 0,8 0,7 0,5 10 0,7 0,6 0,95 1,2 a5 5,1 5,25 2,15 4,15 5,1 5,25 a1 9,2 4x2=8 9,1 4,15 11 4x2=8 ERNI MicroSpeed - Application Note 4.0 Standard Blind Mate Right Angle Power Modules Male Blind Mate Power Modules SMT Version SMT/THR Version 14,15 14,15 12,55 12,55 4x2=8 a5 a1 6,75 5,1 5,25 2,25 6,75 9,2 0,8 0,7 0,5 0,6 10,15 0,6 2,5 0,5 0,8 10,15 2,75 11 3 2,5 11 6,1 2,75 6,1 3 12,15 8,8 12,15 0,7 1,2 a1 5,1 5,25 a5 4,475 9,1 2,25 4,475 4x2=8 8,8 THR Version 14,15 12,55 9,2 a1 0,6 0,5 6,75 5,1 0,7 1,2 a5 5,25 2,25 4,475 4x2=8 0,8 10,15 2,5 11 2,75 3 12,15 6,1 8,8 41 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Standard Blind Mate Right Angle Power Modules Female Blind Mate Power Modules SMT Version SMT/THR Version 12,4 4x2=8 a1 5,25 a1 a5 0,6 11 0,5 0,6 2,4 6,1 3 11 8,8 11,9 THR Version 12,4 4x2=8 2,1 5,1 5,25 4,15 9,8 a5 0,6 0,8 10 0,95 0,5 0,6 0,7 1,2 a1 2,4 11 6,1 3 8,8 11,9 42 www.erni.com 2,4 6,1 3 8,8 11,9 12/10 0,6 0,8 10 0,95 0,8 10 0,7 0,5 0,7 0,6 0,95 1,2 a5 5,1 2,1 9,8 4,15 5,1 5,25 2,1 9,7 4,15 12,4 4x2=8 ERNI MicroSpeed - Application Note 4.0 Layouts Standard and Blind Mate Right Angle Power Modules Male Power Modules SMT Version SMT/THR Version Leiterplatten-Layout Vorschlag / PCB-Layout Proposal Leiterplatten-Layout Vorschlag / PCB-Layout Proposal 11 1.) 0,7 ±0,03 1.) 0,9 ±0,03 11 0,7 ±0,03 3x3=9 Leiterplatten-Layout Vorschlag / PCB-Layout Proposal 1.) 0,9 ±0,03 11 0,7 ±0,03 3x3=9 3x3=9 3 3 1 1.) Durchmesser des Bohrers / Drill too 0,75 1,7 1,5 1,5 0,8 4x2=8 0,6 ±0,05 2 Leiterplattenkante Board edge 1,575 3 0,8 1,575 2 0,86 2,6 2,6 0,085 1,725 0,25 0,25 0,9 ±0,03 3 0,75 2,6 2,85 0,75 2,6 2,6 0,75 1.) 2,5 3 0,5 1.) 3 1.) THR Version 1,5 0,6 ±0,05 2 Leiterplattenkante Board edge 4x2=8 Leiterplattenkante Board edge 4x2=8 Für weitere Layout Details bitte MicroSpeed Applikations Schrift beachten. 0,25 0,36 For further layout details please consider MicroSpeed application note. 0,25 11,8 Female Power Modules SMT/THR Version Leiterplatten-Layout Vorschlag / PCB-Layout Proposal 11 1.) 0,7 ±0,03 Leiterplatten-Layout Vorschlag/ PCB-Layout Proposal 1.) 0,9 ±0,03 11 0,7 ±0,03 3x3=9 3 3 0,36 11,8 0,25 0,75 1,7 0,8 0,6 ±0,05 2 4x2=8 Für weitere Layout Details bitte MicroSpeed Applikations Schrift beachten. 0,25 1.) Durchmesser des Bohrers / Dril 2,6 1,5 Leiterplattenkante Board edge 4x2=8 0,9 ±0,03 Leiterplattenkante Board edge 1,575 3 2 1.) 3x3=9 3 0,75 2,6 0,75 0,25 0,25 0,75 0,8 0,86 1,5 11 0,7 ±0,03 1.) Durchmesser des Bohrers / Drill tool 2,6 1,725 2,6 2,6 0,085 1.) 2,5 2,85 0,5 3 Leiterplatten-Layout Vorschlag / PCB-Layout Proposal 0,9 ±0,03 3x3=9 1.) Durchmesser des Bohrers / Drill tool 1 1.) 1,575 1.) THR Version 3 SMT Version 1,5 0,6 ±0,05 2 4x2=8 Leiterplattenkante Board edge For further layout details please consider MicroSpeed application note. 43 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Power Modules Available Power Module Heights Male Power Module Heights 10 mm 9 mm 2 mm 1 mm Female Power Module Heights 10 mm 8 mm 6 mm 4 mm 44 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Available Power Modules Standard Vertical Power Modules Male Female Height Part Number SMT Part Number THR Height Part Number SMT Part Number THR Board-toBoard Height 1 mm 214357 214916 4 mm 214356 214912 5 mm 2 mm 214550 214917 4 mm 214356 214912 6 mm 1 mm 214357 214916 6 mm 214547 214913 7 mm 2 mm 214550 214917 6 mm 214547 214913 8 mm 1 mm 214357 214916 8 mm 214548 214914 9 mm 2 mm 214550 214917 8 mm 214548 214914 10 mm 1 mm 214357 214916 10 mm 214549 214915 11 mm 2 mm 214550 214917 10 mm 214549 214915 12 mm 9 mm 214551 214918 4 mm 214356 214912 13 mm 10 mm 214552 214919 4 mm 214356 214912 14 mm 9 mm 214551 214918 6 mm 214547 214913 15 mm 10 mm 214552 214919 6 mm 214547 214913 16 mm 9 mm 214551 214918 8 mm 214548 214914 17 mm 10 mm 214552 214919 8 mm 214548 214914 18 mm 9 mm 214551 214918 10 mm 214549 214915 19 mm 10 mm 214552 214919 10 mm 214549 214915 20 mm 45 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Available Power Modules Standard Vertical Power Modules Blind Mate Male Female Height Part Number SMT Part Number THR Height Part Number SMT Part Number THR Board-toBoard Height 1 mm 354275 354276 4 mm 354262 354263 5 mm 2 mm 354277 354278 4 mm 354262 354263 6 mm 1 mm 354275 354276 6 mm 354264 354265 7 mm 2 mm 354277 354278 6 mm 354264 354265 8 mm 1 mm 354275 354276 8 mm 354266 354267 9 mm 2 mm 354277 354278 8 mm 354266 354267 10 mm 1 mm 354275 354276 10 mm 354268 354269 11 mm 2 mm 354277 354278 10 mm 354268 354269 12 mm 9 mm 354279 354280 4 mm 354262 354263 13 mm 10 mm 354281 354282 4 mm 354262 354263 14 mm 9 mm 354279 354280 6 mm 354264 354265 15 mm 10 mm 354281 354282 6 mm 354264 354265 16 mm 9 mm 354279 354280 8 mm 354266 354267 17 mm 10 mm 354281 354282 8 mm 354266 354267 18 mm 9 mm 354279 354280 10 mm 354268 354269 19 mm 10 mm 354281 354282 10 mm 354268 354269 20 mm 46 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Available Power Modules Standard Right Angle Power Modules Male Number Part Number of Pins SMT 5 364705 Female Part Number Part Number Number Part Number Part Number SMT/THR THR of Pins SMT SMT/THR 364706 394573 5 364709 364710 Part Number THR 394571 Standard Right Angle Power Modules Blind Mate Male Number Part Number of Pins SMT 5 364703 Female Part Number Part Number Number Part Number Part Number SMT/THR THR of Pins SMT SMT/THR 364704 394572 5 364707 364708 Part Number THR 394570 47 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Derating Curves Derating Curves for 5 mm Board-to-Board Height Version MicroSpeed 50 Contacts MicroSpeed 50 Contacts only Shield 48 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Derating Curves MicroSpeed 91 Contacts MicroSpeed 91 Contacts only Shield 49 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Derating Curves MicroSpeed 133 Contacts MicroSpeed 133 Contacts only Shield 50 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Derating Curves MicroSpeed Power Modules 5 Contacts with Shields Derating diagram for a 2-layer board Derating diagram for a Multilayer board Due to the better heat conductivity of copper, the power connector derating performance can be increased by 30-50% in Multilayer applications. The derating diagrams are showing full current loading to every contact. If full current loading is applied to selective pins, the capacity can also increased by another 30-50%. 51 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Possible Pin Configurations Signal Connectors Signal pads GND pads Differential Routing Due to the grid ratio (1x1.5 mm) we achieve 100 Ohm differential routing in vertical and horizontal direction. Horizontal Vertical 52 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Recommended paste printing process with regards to the THR pins The DEK ProFlow System such a closed printing system can be used, when space for a solder paste depot is restricted. With this system the solder paste filling of the vias can be improved. Process description Transfer head on contact height. PCB moved to printing position. Transfer head moved to printing height. Transfer head moved over the stencil. Solder paste is induced into a rolling action. Paste printing is finished. Transfer head moved back to contact height. 53 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Measurement Results Results for Board-to-Board Connections Measurements done with the network Analyzer HP 8510 20GHz. 54 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Measurement Results 5 mm Board-to-Board Height Differential Signals Insertion Loss Crosstalk Single Ended Signals Insertion Loss Crosstalk 55 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Measurement Results 8 mm Board-to-Board Height Differential Signals Insertion Loss Crosstalk Single Ended Signals Insertion Loss Crosstalk 56 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Measurement Results 17 mm Board-to-Board Height Differential Signals Insertion Loss Crosstalk Single Ended Signals Insertion Loss Crosstalk 57 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Measurement Results 20 mm Board-to-Board Height Differential Signals Insertion Loss Crosstalk Single Ended Signals Insertion Loss Crosstalk 58 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Measurement Results Results for Right Angle Female and Vertical Male Connections Measurements done with the network Analyzer HP 8510 20GHz. 59 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Measurement Results Right Angle Female and Vertical Male Connectors Differential Signals Insertion Loss Crosstalk More measurement results are available in separate reports. 60 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Repair Tools Depending on the equipment, we recommend preheating the entire assembly group to 70-80°C, to reduce the local heat stress during the repair process. When using a local repair station, the solder energy has to be applied predominantly to the bottom of the pcb. Examples for commercially rework systems available at the market: ERSA - IR 550 MARTIN - Expert-07.6 FINETECH - FINEPLACER CRS 10 VJ ELECTRONICS - Summit 2200 or Summit 1100 61 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Repair Tools ZEVAC Onyx 29 62 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Repair Tools 63 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Notes 64 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Notes 65 www.erni.com 12/10 ERNI MicroSpeed - Application Note 4.0 Notes 66 www.erni.com 12/10 Member www.erni.com Katalog D 074518 Ausgabe 12/10 3, 03/05 www.erni.com 67 ERNI Electronics GmbH & Co. KG Seestrasse 9 73099 Adelberg/Germany Tel +49 7166 50-0 Fax +49 7166 50-282 [email protected] Europe ERNI Electronics, Inc. 2201 Westwood Ave Richmond, VA 23230/USA Tel +1 804 228-4100 Fax +1 804 228-4099 [email protected] North America ERNI Asia Holding Pte Ltd.Asia Blk 4008 Ang Mo Kio Avenue 10 #04-01/02 Techplace I Singapore 569625 Tel +65 6 555 5885 Fax +65 6 555 5995 [email protected] South America Australia Africa Japan Canada Mexico New Zealand www.erni.com © ERNI Electronics GmbH & Co. KG 2010 • Printed in Germany. A policy of continuous improvement is followed and the right to alter any published data without notice is reserved. ERNI ®, MicroStac ®, MicroSpeed ®, MiniBridge ®, MaxiBridge ®, ERmet ®, ERmet ZD ®, ERbic ® and ERNIPRESS ® are trademarks (registered or applied for in various countries) of ERNI Electronics GmbH & Co. KG. 12/10