IDG-A www.erni.com Catalog CatalogE EXXXXXX XXXXXX 06/10 06/10 Edition 1 www.erni.com Edition 1 1 www.erni.com 2 Catalog E XXXXXX 06/10 Edition 1 www.erni.com DIN Rail Mount Enclosure IDG-A General Features The new IDG-A1 DIN rail mount enclosure is ideal for applications requiring a housing for smaller pcbs and minimal DIN rail space loss. The IDG-A1 has sleak lines, making this an attractive packaging medium for applications such as home/building automation. This enclosure has been designed according to DIN 43 880, providing the dimensions and specifications required for installation component standards. Conforming to VBG 4 and IEC529/DIN VDE 0470-1, the IDG-A1 prevents accidental shock and injury while meeting the requirements of the automation industries.This new housing enables users to incorporate one vertical pcb and a top horizontal pcb or three horizontal pcbs. The top horizontal pcb is ideal for holding signalling devices/indicators and switches. Fully populated, the terminal blocks have a maximum of 12 screw clamp #terminals. For applications not requiring all 12 I/O positions or requirements for additional internal space, selective loading may be done, with empty positions being filled with blind plugs. •Installed width of 17.5+0.5 mm •Dimensional size per DIN 43 880, component size 1 •Mountable to DIN rails meeting DIN 46 277 and DIN EN 50 022 (35mm) •Ease of assembly due to snap-together design •One main PCB (vertical) or up to three horizontal PCBs •Two terminal blocks (one left, one right), each with two sets of three positions (may be custom-loaded) •Blind insert may be utilized in-place of terminal blocks for maximum space utilization •2 cover versions: grey cover or grey cover frame for clear hinged face plate (for access to switching components) •Grounding connection via DIN rail pending •Customer-specific colors and designs available upon request Catalog E XXXXXX 06/10 Edition 1 www.erni.com 3 DIN Rail Mount Enclosure IDG-A Electrical and Mechanical Characteristics Type Degree of Protection Air Distance and Creepage (Terminal Block) Creepage proof (Terminal Block) Insulation Material Maximum Current Maximum Wire Size Materials Upper Housing Shell Lower Housing Shell Blind Terminal Block Cover Hinged Face Plate Terminal Block Blind Plug Screw Clamp pcb Termination Pin Nomenclature Marker Operating Temperature Outer Dimensions: With Cover (W x H x D) Outer Dimensions: With Hinged Face Plate (W x H x D) IDG-A1 IP 20 min. 2.5 mm CTI 250 III a max. 12 A max. 2.5 mm2 (14 AWG) PC 30 % GF UL 94-V1 PC 30 % GF UL 94-V1 PC 30 % GF UL 94-V1 PC 30 % GF UL 94-V1 PC UL 94-V2 PA 46 30 % GF UL 94-V0 PC UL 94-V2 Steel (zinc plated) CuSn 6 (2 µm Ni +5 µm SnPb plating) PA 66 -40 °C .... +110 °C 90 x 58 x 17.7 mm 90 x 60 x 17.7 mm All data only for the housing shell without pcb connection. Notice the influencing of the air distance and the creepage because of the wiring. IDG-A1: Dimensional Drawing 67.5 27.7 49 9. 11 45 5.35 90 5.35 17.7 4 Catalog E XXXXXX 06/10 Edition 1 www.erni.com DIN Rail Mount Enclosure IDG-A 5 4 3 1 6 2 Horizontal pcb 8 7 Horizontal pcb Individual Components ItemDescription 1 2 3 4 5 6 7 8 Catalog E XXXXXX Material Upper Housing Shell pcb Termination Pin Screw Clamp Terminal Block Lower Housing Shell Cover with Hinged Face Plate Snap-on Nomenclature Marker Blind Plug 06/10 Edition 1 Vertical pcb PC 30% GF CuSn6 (tin plated) Steel (zinc plated) PA 46 30% GF PC 30% GF PC 30% GF/PC PA 66 PC www.erni.com 5 DIN Rail Mount Enclosure IDG-A PCB Dimensions and Installation Notes Horizontal PCB with cover max. 3.1 37.4 top view on PCB 1 - 0.3 1.5 14.85 max. 18 22.5 PCB 2 30.3 37.5 - 0.2 35 + 0.5 max. 19.6 + 0.5 notch for grounding angle 0.5 max. 13 max. 37.5 max. 40.6 max. 17.3 max. 21 19.8 top view on PCB 2 5.35 max. 14.4 15 - 0.3 PCB 1 5.35 1.5 with cover frame fo r hinged face plate max. 35.2 max. 32.1 max. 8.1 15 - 0.3 Limitation on positioning for components 15 - 0.3 1.5 PCB 3 + 0.05 - 5.35 [3.1 5.35 [1 45 52.8 60 - 0.3 top view on PCB 3 all dimensions untoleranced = ±0.1 Vertical PCB max. 40.6 36.3 - 0.3 max. 11.2 34.6 max. 1.8 - 0.3 max. 18 1.2 + 0.05 - [1 21.3 - 0.3 - 0.3 38.1 6.6 1 5.5 4.1 6. 0.35 min. 1.3 21.3 36.8 6. 15 max. 20 6. 6.6 6. [3.1 22.5 30.3 39.2 + 0.3 45 52.8 58.8 - Limitation on positioning for components 6 Catalog E XXXXXX 0.3 06/10 all dimensions untoleranced = ±0.1 Edition 1 www.erni.com DIN Rail Mount Enclosure IDG-A Ordering Information Description PCB Orientation* Cover Version Complete Kit Complete Kit Complete Kit Complete Kit Vertical Vertical Horizontal Horizontal Cover Cover with Hinged Face Plate Cover Cover with Hinged Face Plate Part No. 104990 104991 104992 104993 Note: *pcb Orientation is in relation to DIN rail The complete kits are packaged individually and consist of the following: an upper housing shell, lower housing shell, two left terminal blocks, two right terminal blocks (both terminal blocks are populated with 6 pins and screw clamps each) and a cover. The individual components listed in the table below are ideal for applications with high production volumes. Description Part No. Lower Housing Shell Upper Housing Shell Left Terminal Block, Assembled Right Terminal Block, Assembled Horizontal pcb Terminal Block, Assembled Snap-on Nomencature Markers Blind Terminal Block Empty Terminal Block Housing Blind Plug for Terminal Block Housing Screw Clamp 064080 064081 104872 104873 104874 104413 064085 064086 414466 104150 Description pcb Pin 1, Left/Right pcb Pin 2, Left pcb Pin 3, Left pcb Pin 2, Right pcb Pin 3, Right pcb Pin Horizontal pcb Cover Cover Frame for Hinged Face Plate Hinged Face Plate, Transparent Part No. 064087 064088 103681 103950 103951 103684 064082 064083 064084 Installation Diagram Catalog E XXXXXX 06/10 Edition 1 www.erni.com 7 ERNI Electronics GmbH Seestrasse 9 73099 Adelberg/Germany Tel +49 7166 50-0 Fax +49 7166 50-282 [email protected] Europe ERNI Electronics, Inc. 2201 Westwood Ave Richmond, VA 23230/USA Tel +1 804 228-4100 Fax +1 804 228-4099 [email protected] North America South America Canada Africa Japan Mexico ERNI Asia Holding Pte Ltd.Asia Blk 4008 Ang Mo Kio Avenue 10 #04-01/02 Techplace I Singapore 569625 Tel +65 6 555 5885 Fax +65 6 555 5995 [email protected] www.erni.com © ERNI Electronics GmbH 2009 • Printed in Germany. A policy of continuous improvement is followed and the right to alter any published data without notice is reserved. ERNI ®, MicroStac ®, MicroSpeed ®, MiniBridge ®, MaxiBridge ®, ERmet ®, ERmet ZD ®, ERbic ® and ERNIPRESS ® are trademarks (registered or applied for in various countries) of ERNI Electronics GmbH. 8 Catalog E XXXXXX 06/10 Edition 1 www.erni.com