ECSpressCON™ Very low RMS Jitter Short Lead time Pb Free/RoHS2 Compliant MSL 1 Peak solder temp +260°C (10 sec) ECX-P LVPECL OSCILLATOR ECX-P2 (2.5V) and ECX-P3 (3.3V) low jitter, low current Frequency Configurable SMD crystal controlled oscillators. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS ECX-P2 (+2.5V) PARAMETERS CONDITIONS MIN Frequency Range 10.0 0 -40 -55 +2.375 Standard Extended (N Option) Operating Temperature Storage Temperature Supply Voltage VDD Option A Option B Option C Option D 10.0 to 100.0 100.1 to 250.0 250.1 to 500.0 500.1 to 1500.0 @ 50% VDD level Differential Pin 1 ** Pin 1 Frequency Stability * Input Current Output Symmetry Output Load Output Enable Time Output Disable Time Disable Current Output Enable Time Output Disable Time "0" level "1" level Rise and Fall Times Aging Start-up Time Phase Jitter, rms Absolute Voltage Range Moisture Sensitivity Level Termination Finish ESD Sensitivity TYP +2.5 ECX-P3 (+3.3V) MAX MIN 1500.0 10.0 +70 0 +85 -40 +125 -55 +2.625 +3.135 ± 100 ± 50 ± 25 ± 20 46 48 53 65 48/52 0.7% TYP +3.3 1500.0 +70 +85 +125 +3.465 ± 100 ± 50 ± 25 ± 20 48 50 55 MHz °C °C °C VDC ppm ppm ppm ppm mA mA mA mA % 68 48/52 0.7% 0.3% 16 200 50 Vdd-0.6V Vdd-1.03V Vdd-1.6V Vdd-1.85V 250 150 ±2 10 Vdd-1.03V Vdd-1.85V 150 Vdd Vdd mA ns ns 0.3% 16 Pin 1 = VIL VOL VOH 10% VDD to 90% level @ +25°C (first year) @ +25°C (first year) 12 KHz to 20 MHz band UNITS MAX 1.0 200 50 Vdd-0.6V Vdd-0.6V 250 ±2 10 pS ppm ms pS VDC 1.0 +4.6 +4.6 1 Au 3 kV Max. Human Body Model * Note: Inclusive of +25°C tolerance, operating temperature, input voltage change, load change, shock and vibration. **Note: Internal pull-up resistor allows active output in pin 1 is left open. Part Number Guide Series Voltage ECX-P 2 = +2.5V 3 = +3.3V (LVPEL Output) Package 2 = 2.5 x 2 mm 3 = 3.2 x 2.5 mm 5 = 5 x 3.2 mm 7 = 7 x 5 mm Stability A = ±100 ppm B = ±50 ppm C = ±25 ppm D = ±20 ppm Operating Temperature L = -10 ~ +70°C M = -20 ~ +70°C N = -40 ~ +85°C P = -40 ~ +85°C Frequency - Customer Specified Example ECX-P35BN-156.250 1105 South Ridgeview Road z Olathe, KS 66062 z Phone: 913.782.7787 z Fax: 913.782.6991 z www.ecsxtal.com ECSpressCON™ ECX-P LVPECL OSCILLATOR Phase Noise and Jitter Data (typical) SSB Phase Noise Data (dBc/Hz typical) Frequency (offset) 77.760 122.880 125.000 156.250 10 Hz 1 KHz 1 KHz 10 KHz 100 KHz 1 MHz 5 MHz Phase Jitter pS 12 KHz ~ 20 MHz, RMS 212.5 491.520 622.080 1000 1250 -64 -84 -118 -128 -137 -145 -152 -68 -99 -113 -119 -120 -140 -142 -63 -94 -113 -118 -119 -137 -146 -55 -85 -109 -116 -118 -139 -146 -62 -93 -105 -113 -115 -135 -143 -61 -86 -100 -105 -105 -126 -137 -48 -85 -101 -102 -103 -124 -133 -52 -82 -93 -97 -97 -116 -127 -42 -81 -93 -96 -97 -119 -129 0.9 0.8 1.1 0.9 1.0 1.1 1.2 1.5 1.1 Phase Noise Plot of ECX-P35BN-77.760 (typical) Package Data Item Description Lid Base Metal Ceramic Plating Gold/Nickel Surface/Under 1105 South Ridgeview Road z Olathe, KS 66062 z Phone: 913.782.7787 z Fax: 913.782.6991 z www.ecsxtal.com ECSpressCON™ ECX-P LVPECL OSCILLATOR Dimensions (mm) 7 = 7x5 Package 5 = 5x3.2 Package 3 = 3.2x2.5 Package 2 = 2.5x2 Package Suggested Reflow Profile Pin Connections 1105 South Ridgeview Road z Olathe, KS 66062 z Phone: 913.782.7787 z Pin # Function 1 2 3 4 5 6 O/E or No Connect No Connect Ground Differential Output Complementary Output Supply Voltage Fax: 913.782.6991 z www.ecsxtal.com