FEATURES / BENEFITS RoHS compliant 586 Series Single Chip BASED LED T2 Telephone Slide (TYPE 3) High brightness with low current draw - uses up to 90% less energy than an incandescent Long life - up to 100K hours True non-polarized configuration No heat generated Mounts directly into industry standard socket Resistant to shock and vibration AlInGaP and InGaN technology Super bright single chip design Colors include red, green, yellow, blue and white Dialight's line of based LED lamps is designed to directly replace many popular subminiature and miniature incandescent lamps. The benefits of LED technology over incandescent are significant: They offer long life, are shock resistant, withstand vibration and provide energy conservation. SPECIFICATIONS ]7.197 91.[ [5.00] 00.5 71.68 6.24 [42.67] ]86.1[ Operating voltage: 24 VAC/VDC Non-polarized Operating temperature: -30oC to +85oC Storage temperature: * See Dialight’s Incandescent lamp/based LED cross reference for a complete listing -40oC to +100oC Measurements are typical Dimensions are inches [mm] CONSIDERATIONS Since lens caps act as filters for the light emitted from the based LED, it is important to match the emitting color of the LED. If not matched properly, the overall light output may be substantially reduced. Dialight recommends using transparent lenses, which will optimize light output. Although these lamps can be operated at a lower voltage, which will increase the life, the intensity will be reduced. Operation of the based LED at a higher voltage should not exceed 10% above the recommended voltage. Dialight does not recommend that based LED lamps be used in neon sockets. Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEL586G001_F 586 Series Single Chip BASED LED T2 Telephone Slide (TYPE 3) T2 TELEPHONE SLIDE (ANSI #1) NON-POLARIZED COLOR PEAK WAVELENGTH (nm) VOLTAGE (VDC) CURRENT TYP.-(mA) INTENSITY TYP.-(mcd) RoHS COMPLIANT 586-3501-204F Red 622 24 25 600 586-3502-204F Green 525 24 25 5000 586-3503-204F Yellow 592 24 25 1700 586-3505-204F Blue 470 24 25 1500 586-3506-204F White * 24 25 5600 PART NUMBER * Color Coordinates: x = 0.290, y = 0.305 Based LE Ds SELECTION With the technological advancements in Light Emitting Diodes (LEDs) brightness can now rival the incandescent lamp when used in similar packages. These advancements have created a new type of product called the based LED - an LED with the functionality of an incandescent bulb. The following styles are currently available in red, green, yellow, blue and white: T1 3/4 Midget Flange T1 3/4 Bi-Pin T1 3/4 Wedge (T5) T2 Telephone Slide T3 1/4 Miniature Bayonet (BA9s) T3 1/4 Miniature Screw (E10) T3 1/4 Wedge (T10) 15mm SC Bayonet (BA15s) Dialight’s line of based LEDs continues to grow. Please visit our website for more information. www.dialight.com Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEL586G001_F